wiki:PlasticSlices/Continuation/Round2

Version 1 (modified by Josh Smift, 8 years ago) (diff)

--

Continuation Round 2

In this round, I ran plastic-104 for about three days, to try to exercise a monitoring bug.

The raw logs are at http://www.gpolab.bbn.com/plastic-slices/continuation/round-2/.

plastic-104

SteadyPerf UDP, using port=5104, time=518400, rate=3, and this table of client/server pairs:

client server server address
ganel.gpolab.bbn.com wings-openflow-2.wail.wisc.edu server=10.42.104.95
wings-openflow-3.wail.wisc.edu orbitplc2.orbit-lab.org server=10.42.104.112
orbitplc1.orbit-lab.org pl4.myplc.grnoc.iu.edu server=10.42.104.72
pl5.myplc.grnoc.iu.edu sardis.gpolab.bbn.com server=10.42.104.53

One-time prep commands run on each client and server

sudo yum -y install iperf

Commands run on each server

server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5104 -s -i 1

Commands run on each client

server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5104 -t 518400 -b 3M

Results

Generated with

subnet=104
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

ganel.gpolab.bbn.com:

------------------------------------------------------------
Client connecting to 10.42.104.95, UDP port 5104
Sending 1470 byte datagrams
UDP buffer size:   110 KByte (default)
------------------------------------------------------------
[  3] local 10.42.104.51 port 56273 connected with 10.42.104.95 port 5104
[  3]  0.0-243894.3 sec  85.2 GBytes  3.00 Mbits/sec
[  3] Sent 62217930 datagrams
[  3] Server Report:
[  3]  0.0-243892.1 sec  85.2 GBytes  3.00 Mbits/sec  0.010 ms  647/62217930 (0.001%)
[  3]  0.0-243892.1 sec  360 datagrams received out-of-order

wings-openflow-3.wail.wisc.edu:

------------------------------------------------------------
Client connecting to 10.42.104.112, UDP port 5104
Sending 1470 byte datagrams
UDP buffer size:  110 KByte (default)
------------------------------------------------------------
[  3] local 10.42.104.96 port 39179 connected with 10.42.104.112 port 5104
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-243902.8 sec  85.2 GBytes  3.00 Mbits/sec
[  3] Sent 62220093 datagrams
[  3] Server Report:
[  3]  0.0-243900.0 sec  85.2 GBytes  3.00 Mbits/sec   0.021 ms  952/62220093 (0.0015%)
[  3]  0.0-243900.0 sec  119 datagrams received out-of-order

orbitplc1.orbit-lab.org:

------------------------------------------------------------
Client connecting to 10.42.104.72, UDP port 5104
Sending 1470 byte datagrams
UDP buffer size:   110 KByte (default)
------------------------------------------------------------
[  3] local 10.42.104.111 port 44818 connected with 10.42.104.72 port 5104
[  3]  0.0-243912.5 sec  85.2 GBytes  3.00 Mbits/sec
[  3] Sent 62222584 datagrams
[  3] Server Report:
[  3]  0.0-243909.0 sec  85.2 GBytes  3.00 Mbits/sec  0.005 ms 1228/62222584 (0.002%)
[  3]  0.0-243909.0 sec  5091 datagrams received out-of-order

pl5.myplc.grnoc.iu.edu:

------------------------------------------------------------
Client connecting to 10.42.104.53, UDP port 5104
Sending 1470 byte datagrams
UDP buffer size:   110 KByte (default)
------------------------------------------------------------
[  3] local 10.42.104.73 port 34865 connected with 10.42.104.53 port 5104
[  3]  0.0-243919.2 sec  85.2 GBytes  3.00 Mbits/sec
[  3] Sent 62224276 datagrams
[  3] Server Report:
[  3]  0.0-243916.3 sec  85.2 GBytes  3.00 Mbits/sec  0.005 ms 1186/62224276 (0.0019%)
[  3]  0.0-243916.3 sec  193 datagrams received out-of-order

Analysis

All data seems to have been sent successfully (up to four nines, anyway).