Here are the details of Baseline 7, divided by slice.

The raw logs of each experiment are at ​http://www.gpolab.bbn.com/plastic-slices/baseline-logs/baseline-7/.

plastic-101

GigaPing, using count=100000, and this table of client/server pairs:

client	server	server address
ganel.gpolab.bbn.com	planetlab5.clemson.edu	server=10.42.101.105
planetlab4.clemson.edu	plnode2.cip.gatech.edu	server=10.42.101.101
plnode1.cip.gatech.edu	pl5.myplc.grnoc.iu.edu	server=10.42.101.73
pl4.myplc.grnoc.iu.edu	orbitplc2.orbit-lab.org	server=10.42.101.112
orbitplc1.orbit-lab.org	of-planet2.stanford.edu	server=10.42.101.91
of-planet1.stanford.edu	pl02.cs.washington.edu	server=10.42.101.81
pl01.cs.washington.edu	wings-openflow-3.wail.wisc.edu	server=10.42.101.96
wings-openflow-2.wail.wisc.edu	gardil.gpolab.bbn.com	server=10.42.101.52

Commands run on each client

server=<ipaddr>
sudo ping -i .006 -s $((1500-8-20)) $server

Results

Generated from the logs with

subnet=101
for host in ganel.gpolab.bbn.com planetlab4.clemson.edu plnode1.cip.gatech.edu pl4.myplc.grnoc.iu.edu orbitplc1.orbit-lab.org of-planet1.stanford.edu pl01.cs.washington.edu wings-openflow-2.wail.wisc.edu ; do echo -e "$host:\n\n{{{" ; grep -A 2 statistics pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done

Analysis

(forthcoming)

plastic-102

GigaPing, using count=100000, and this table of client/server pairs:

client	server	server address
sardis.gpolab.bbn.com	planetlab4.clemson.edu	server=10.42.102.104
planetlab5.clemson.edu	plnode1.cip.gatech.edu	server=10.42.102.100
plnode2.cip.gatech.edu	pl4.myplc.grnoc.iu.edu	server=10.42.102.72
pl5.myplc.grnoc.iu.edu	orbitplc1.orbit-lab.org	server=10.42.102.111
orbitplc2.orbit-lab.org	of-planet2.stanford.edu	server=10.42.102.91
of-planet1.stanford.edu	pl01.cs.washington.edu	server=10.42.102.80
pl02.cs.washington.edu	wings-openflow-2.wail.wisc.edu	server=10.42.102.95
wings-openflow-3.wail.wisc.edu	bain.gpolab.bbn.com	server=10.42.102.54

Commands run on each client

server=<ipaddr>
sudo ping -i .006 -s $((1500-8-20)) $server

Results

Generated from the logs with

subnet=102
for host in sardis.gpolab.bbn.com planetlab5.clemson.edu plnode2.cip.gatech.edu pl5.myplc.grnoc.iu.edu orbitplc2.orbit-lab.org of-planet1.stanford.edu pl02.cs.washington.edu wings-openflow-3.wail.wisc.edu ; do echo -e "$host:\n\n{{{" ; grep -A 2 statistics pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done

Analysis

(forthcoming)

plastic-103

GigaPerf TCP, using port=5103, size=350, and this table of client/server pairs:

client	server	server address
of-planet1.stanford.edu	navis.gpolab.bbn.com	server=10.42.103.55
ganel.gpolab.bbn.com	orbitplc1.orbit-lab.org	server=10.42.103.111
pl02.cs.washington.edu	bain.gpolab.bbn.com	server=10.42.103.54
of-planet2.stanford.edu	pl01.cs.washington.edu	server=10.42.103.80

One-time prep commands run on each client and server

sudo yum -y install iperf

Commands run on each server

server=<ipaddr>
nice -n 19 iperf -B $server -p 5103 -s -i 1

Commands run on each client

server=<ipaddr>
nice -n 19 iperf -c $server -p 5103 -t 518400

Results

Generated with

subnet=103
for host in of-planet1.stanford.edu ganel.gpolab.bbn.com pl02.cs.washington.edu of-planet2.stanford.edu orbitplc2.orbit-lab.org ; do echo -e "$host:\n\n{{{" ; grep -a -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

Analysis

(forthcoming)

plastic-104

GigaPerf UDP, using port=5104, size=500, rate=100, and this table of client/server pairs:

client	server	server address
navis.gpolab.bbn.com	wings-openflow-2.wail.wisc.edu	server=10.42.104.95
wings-openflow-3.wail.wisc.edu	orbitplc2.orbit-lab.org	server=10.42.104.112
orbitplc1.orbit-lab.org	pl4.myplc.grnoc.iu.edu	server=10.42.104.72
pl5.myplc.grnoc.iu.edu	gardil.gpolab.bbn.com	server=10.42.104.52

One-time prep commands run on each client and server

sudo yum -y install iperf

Commands run on each server

server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5104 -s -i 1

Commands run on each client

server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5104 -t 518400 -b 3M

Results

Generated with

subnet=104
for host in navis.gpolab.bbn.com wings-openflow-3.wail.wisc.edu orbitplc1.orbit-lab.org pl5.myplc.grnoc.iu.edu ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

Analysis

(forthcoming)

plastic-105

GigaPerf TCP, using port=5105, size=250, and this table of client/server pairs:

client	server	server address
wings-openflow-2.wail.wisc.edu	planetlab5.clemson.edu	server=10.42.105.105
planetlab4.clemson.edu	sardis.gpolab.bbn.com	server=10.42.105.53
bain.gpolab.bbn.com	plnode2.cip.gatech.edu	server=10.42.105.101
plnode1.cip.gatech.edu	wings-openflow-3.wail.wisc.edu	server=10.42.105.96

One-time prep commands run on each client and server

sudo yum -y install iperf

Commands run on each server

server=<ipaddr>
nice -n 19 iperf -B $server -p 5105 -s -i 1

Commands run on each client

server=<ipaddr>
nice -n 19 iperf -c $server -p 5105 -t 518400

Results

Generated with

subnet=105
for host in wings-openflow-2.wail.wisc.edu planetlab4.clemson.edu bain.gpolab.bbn.com plnode1.cip.gatech.edu ; do echo -e "$host:\n\n{{{" ; grep -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

Analysis

(forthcoming)

plastic-106

GigaPerf UDP, using port=5106, size=500, rate=100, and this table of client/server pairs:

client	server	server address
planetlab5.clemson.edu	wings-openflow-2.wail.wisc.edu	server=10.42.106.95
wings-openflow-3.wail.wisc.edu	plnode1.cip.gatech.edu	server=10.42.106.100
plnode2.cip.gatech.edu	ganel.gpolab.bbn.com	server=10.42.106.51
gardil.gpolab.bbn.com	planetlab4.clemson.edu	server=10.42.106.104

One-time prep commands run on each client and server

sudo yum -y install iperf

Commands run on each server

server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5106 -s -i 1

Commands run on each client

server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5106 -t 518400 -b 3M

Results

Generated with

subnet=106
for host in planetlab5.clemson.edu wings-openflow-3.wail.wisc.edu plnode2.cip.gatech.edu gardil.gpolab.bbn.com ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

Analysis

(forthcoming)

plastic-107

GigaWeb, using count=30, port=4107, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

client	server	server address
planetlab5.clemson.edu	pl4.myplc.grnoc.iu.edu	server=10.42.107.72
pl5.myplc.grnoc.iu.edu	plnode2.cip.gatech.edu	server=10.42.107.101
plnode1.cip.gatech.edu	pl02.cs.washington.edu	server=10.42.107.81
pl01.cs.washington.edu	planetlab4.clemson.edu	server=10.42.107.104

One-time prep commands run on each server

sudo yum -y install pyOpenSSL patch
cd
rm -rf ~/gigaweb
mkdir -p ~/gigaweb/docroot

cd ~/gigaweb
wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py
wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch
patch httpsd.py httpsd.py.patch
rm httpsd.py.patch

cd ~/gigaweb/docroot
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

cd ~/gigaweb
openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024
openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr
openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt
openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key
mv -f decrypted.localhost.localdomain.key localhost.localdomain.key
cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem
rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr

Commands run on each server

server=<ipaddr>
cd ~/gigaweb/docroot
python ../httpsd.py $server 4107

Commands run on each client

server=<ipaddr>
cd
rm -rf ~/gigaweb
mkdir ~/gigaweb
cd ~/gigaweb
while true ; do wget --no-check-certificate https://$server:4107/substrate.doc -O substrate.doc ; echo -n "md5sum: " ; md5sum substrate.doc ; rm substrate.doc ; done

Results

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

Generated with

subnet=107
for host in planetlab5.clemson.edu pl5.myplc.grnoc.iu.edu plnode1.cip.gatech.edu pl01.cs.washington.edu ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "md5sum:" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "md5sum: d4fcf71833327fbfef98be09deef8bfb" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done

Analysis

(forthcoming)

plastic-108

GigaWeb, using count=40, port=4108, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

client	server	server address
wings-openflow-3.wail.wisc.edu	of-planet2.stanford.edu	server=10.42.108.91
of-planet1.stanford.edu	orbitplc1.orbit-lab.org	server=10.42.108.111
orbitplc2.orbit-lab.org	pl5.myplc.grnoc.iu.edu	server=10.42.108.73
pl4.myplc.grnoc.iu.edu	wings-openflow-2.wail.wisc.edu	server=10.42.108.95

One-time prep commands run on each server

sudo yum -y install pyOpenSSL patch
cd
rm -rf ~/gigaweb
mkdir -p ~/gigaweb/docroot

cd ~/gigaweb
wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py
wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch
patch httpsd.py httpsd.py.patch
rm httpsd.py.patch

cd ~/gigaweb/docroot
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

cd ~/gigaweb
openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024
openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr
openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt
openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key
mv -f decrypted.localhost.localdomain.key localhost.localdomain.key
cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem
rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr

Commands run on each server

server=<ipaddr>
cd ~/gigaweb/docroot
python ../httpsd.py $server 4108

Commands run on each client

server=<ipaddr>
cd
rm -rf ~/gigaweb
mkdir ~/gigaweb
cd ~/gigaweb
while true ; do wget --no-check-certificate https://$server:4108/substrate.doc -O substrate.doc ; echo -n "md5sum: " ; md5sum substrate.doc ; rm substrate.doc ; done

Results

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

Generated with

subnet=108
for host in wings-openflow-3.wail.wisc.edu of-planet1.stanford.edu orbitplc2.orbit-lab.org pl4.myplc.grnoc.iu.edu ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "md5sum:" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "md5sum: d4fcf71833327fbfef98be09deef8bfb" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done

Analysis

(forthcoming)

plastic-109

GigaNetcat, using count=25, port=6109, file=substrate.doc, and this table of client/server pairs:

client	server	server address
navis.gpolab.bbn.com	pl5.myplc.grnoc.iu.edu	server=10.42.109.73
pl4.myplc.grnoc.iu.edu	pl02.cs.washington.edu	server=10.42.109.81
pl01.cs.washington.edu	planetlab5.clemson.edu	server=10.42.109.105
planetlab4.clemson.edu	of-planet1.stanford.edu	server=10.42.109.90
of-planet2.stanford.edu	wings-openflow-3.wail.wisc.edu	server=10.42.109.96
wings-openflow-2.wail.wisc.edu	ganel.gpolab.bbn.com	server=10.42.109.51

One-time prep commands run on each server

sudo yum -y install nc
mkdir -p ~/giganetcat
cd ~/giganetcat
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

One-time prep commands run on each client

sudo yum -y install nc

Commands run on each server

server=<ipaddr>
cd ~/giganetcat
while true ; do nc -l $server 6109 < substrate.doc ; done

Commands run on each client

server=<ipaddr>
cd
rm -rf ~/giganetcat
mkdir ~/giganetcat
cd ~/giganetcat
while true ; do nc $server 6109 > substrate.doc ; echo -n "$(date "+%F %T")  " ; md5sum substrate.doc ; rm substrate.doc ; done

Results

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

Generated with

subnet=109
for host in navis.gpolab.bbn.com pl4.myplc.grnoc.iu.edu pl01.cs.washington.edu planetlab4.clemson.edu of-planet2.stanford.edu wings-openflow-2.wail.wisc.edu ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "d4fcf71833327fbfef98be09deef8bfb  substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done

Analysis

(forthcoming)

plastic-110

GigaNetcat, using count=25, port=6110, file=substrate.doc, and this table of client/server pairs:

client	server	server address
gardil.gpolab.bbn.com	pl01.cs.washington.edu	server=10.42.110.80
pl02.cs.washington.edu	of-planet1.stanford.edu	server=10.42.110.90
of-planet2.stanford.edu	orbitplc2.orbit-lab.org	server=10.42.110.112
orbitplc1.orbit-lab.org	pl4.myplc.grnoc.iu.edu	server=10.42.110.72
pl5.myplc.grnoc.iu.edu	plnode1.cip.gatech.edu	server=10.42.110.100
plnode2.cip.gatech.edu	sardis.gpolab.bbn.com	server=10.42.110.53

One-time prep commands run on each server

sudo yum -y install nc
mkdir -p ~/giganetcat
cd ~/giganetcat
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

One-time prep commands run on each client

sudo yum -y install nc

Commands run on each server

server=<ipaddr>
cd ~/giganetcat
while true ; do nc -l $server 6110 < substrate.doc ; done

Commands run on each client

server=<ipaddr>
cd
rm -rf ~/giganetcat
mkdir ~/giganetcat
cd ~/giganetcat
while true ; do nc $server 6110 > substrate.doc ; echo -n "$(date "+%F %T")  " ; md5sum substrate.doc ; rm substrate.doc ; done

Results

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

Generated with

subnet=110
for host in gardil.gpolab.bbn.com pl02.cs.washington.edu of-planet2.stanford.edu orbitplc1.orbit-lab.org pl5.myplc.grnoc.iu.edu plnode2.cip.gatech.edu ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "d4fcf71833327fbfef98be09deef8bfb  substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done

Analysis

(forthcoming)