[[PageOutline]]

Here are the details of [wiki:PlasticSlices/BaselineEvaluation#Baseline5 Baseline 5], divided by slice.

We changed how we were capturing logs for this baseline, going back to screen's 'screenlog' function, to ensure that we had a more complete record of each experiment. The raw logs are at http://www.gpolab.bbn.com/plastic-slices/baseline-logs/baseline-5/.

= plastic-101 =

[PlasticSlices/Experiments#GigaPing GigaPing], using count=100000, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| ganel.gpolab.bbn.com           || planetlab5.clemson.edu         || server=10.42.101.105 ||
|| planetlab4.clemson.edu         || plnode2.cip.gatech.edu         || server=10.42.101.101 ||
|| plnode1.cip.gatech.edu         || pl5.myplc.grnoc.iu.edu         || server=10.42.101.73  ||
|| pl4.myplc.grnoc.iu.edu         || orbitplc2.orbit-lab.org        || server=10.42.101.112 ||
|| orbitplc1.orbit-lab.org        || of-planet2.stanford.edu        || server=10.42.101.91  ||
|| of-planet1.stanford.edu        || pl02.cs.washington.edu         || server=10.42.101.81  ||
|| pl01.cs.washington.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.101.96  ||
|| wings-openflow-2.wail.wisc.edu || gardil.gpolab.bbn.com          || server=10.42.101.52  ||

== Commands run on each client ==

{{{
server=<ipaddr>
sudo ping -i .05 -s $((1500-8-20)) $server
}}}

== Results ==

ganel.gpolab.bbn.com:

{{{
}}}

planetlab4.clemson.edu:

{{{
}}}

plnode1.cip.gatech.edu:

{{{
}}}

pl4.myplc.grnoc.iu.edu:

{{{
}}}

orbitplc1.orbit-lab.org:

{{{
}}}

of-planet1.stanford.edu:

{{{
}}}

pl01.cs.washington.edu:

{{{
}}}

wings-openflow-2.wail.wisc.edu:

{{{
}}}

== Analysis ==

''(forthcoming)''

= plastic-102 =

[PlasticSlices/Experiments#GigaPing GigaPing], using count=100000, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| sardis.gpolab.bbn.com          || planetlab4.clemson.edu         || server=10.42.102.104 ||
|| planetlab5.clemson.edu         || plnode1.cip.gatech.edu         || server=10.42.102.100 ||
|| plnode2.cip.gatech.edu         || pl4.myplc.grnoc.iu.edu         || server=10.42.102.72  ||
|| pl5.myplc.grnoc.iu.edu         || orbitplc1.orbit-lab.org        || server=10.42.102.111 ||
|| orbitplc2.orbit-lab.org        || of-planet4.stanford.edu        || server=10.42.102.93  ||
|| of-planet3.stanford.edu        || pl01.cs.washington.edu         || server=10.42.102.80  ||
|| pl02.cs.washington.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.102.95  ||
|| wings-openflow-3.wail.wisc.edu || bain.gpolab.bbn.com            || server=10.42.102.54  ||

== Commands run on each client ==

{{{
server=<ipaddr>
sudo ping -i .05 -s $((1500-8-20)) $server
}}}

== Results ==

sardis.gpolab.bbn.com:

{{{
}}}

planetlab5.clemson.edu:

{{{
}}}

plnode2.cip.gatech.edu:

{{{
}}}

pl5.myplc.grnoc.iu.edu:

{{{
}}}

orbitplc2.orbit-lab.org:

{{{
}}}

of-planet3.stanford.edu:

{{{
}}}

pl02.cs.washington.edu:

{{{
}}}

wings-openflow-3.wail.wisc.edu:

{{{
}}}

== Analysis ==

''(forthcoming)''

= plastic-103 =

[PlasticSlices/Experiments#GigaPerfTCP GigaPerf TCP], using port=5103, size=350, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| of-planet1.stanford.edu        || navis.gpolab.bbn.com           || server=10.42.103.55  ||
|| ganel.gpolab.bbn.com           || orbitplc1.orbit-lab.org        || server=10.42.103.111 ||
|| pl02.cs.washington.edu         || bain.gpolab.bbn.com            || server=10.42.103.54  ||
|| of-planet2.stanford.edu        || pl01.cs.washington.edu         || server=10.42.103.80  ||
|| orbitplc2.orbit-lab.org        || of-planet3.stanford.edu        || server=10.42.103.92  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5103 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5103 -t 86400
}}}

== Results ==

of-planet1.stanford.edu:

{{{
}}}

ganel.gpolab.bbn.com:

{{{
}}}

orbitplc2.orbit-lab.org:

{{{
}}}

pl02.cs.washington.edu:

{{{
}}}

of-planet2.stanford.edu:

{{{
}}}

orbitplc1.orbit-lab.org:

{{{
}}}

== Analysis ==

''(forthcoming)''

= plastic-104 =

[PlasticSlices/Experiments#GigaPerfUDP GigaPerf UDP], using port=5104, size=500, rate=100, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| navis.gpolab.bbn.com           || wings-openflow-2.wail.wisc.edu || server=10.42.104.95  ||
|| wings-openflow-3.wail.wisc.edu || orbitplc2.orbit-lab.org        || server=10.42.104.112 ||
|| orbitplc1.orbit-lab.org        || pl4.myplc.grnoc.iu.edu         || server=10.42.104.72  ||
|| pl5.myplc.grnoc.iu.edu         || gardil.gpolab.bbn.com          || server=10.42.104.52  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5104 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5104 -t 86400 -b 512K
}}}

== Results ==

navis.gpolab.bbn.com:

{{{
}}}

wings-openflow-3.wail.wisc.edu:

{{{
}}}

orbitplc1.orbit-lab.org:

{{{
}}}

pl5.myplc.grnoc.iu.edu:

{{{
}}}

== Analysis ==

''(forthcoming)''

= plastic-105 =

[PlasticSlices/Experiments#GigaPerfTCP GigaPerf TCP], using port=5105, size=250, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| wings-openflow-2.wail.wisc.edu || planetlab5.clemson.edu         || server=10.42.105.105 ||
|| planetlab4.clemson.edu         || sardis.gpolab.bbn.com          || server=10.42.105.53  ||
|| bain.gpolab.bbn.com            || plnode2.cip.gatech.edu         || server=10.42.105.101 ||
|| plnode1.cip.gatech.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.105.96  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5105 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5105 -t 86400
}}}

== Results ==

wings-openflow-2.wail.wisc.edu:

{{{
}}}

planetlab4.clemson.edu:

{{{
}}}

bain.gpolab.bbn.com:

{{{
}}}

plnode1.cip.gatech.edu:

{{{
}}}

== Analysis ==

''(forthcoming)''

= plastic-106 =

[PlasticSlices/Experiments#GigaPerfUDP GigaPerf UDP], using port=5106, size=500, rate=100, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab5.clemson.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.106.95  ||
|| wings-openflow-3.wail.wisc.edu || plnode1.cip.gatech.edu         || server=10.42.106.100 ||
|| plnode2.cip.gatech.edu         || ganel.gpolab.bbn.com           || server=10.42.106.51  ||
|| gardil.gpolab.bbn.com          || planetlab4.clemson.edu         || server=10.42.106.104 ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5106 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5106 -t 86400 -b 512K
}}}

== Results ==

== Analysis ==

''(forthcoming)''

= plastic-107 =

[PlasticSlices/Experiments#GigaWeb GigaWeb], using count=30, port=4107, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab5.clemson.edu         || pl4.myplc.grnoc.iu.edu         || server=10.42.107.72  ||
|| pl5.myplc.grnoc.iu.edu         || plnode2.cip.gatech.edu         || server=10.42.107.101 ||
|| plnode1.cip.gatech.edu         || pl02.cs.washington.edu         || server=10.42.107.81  ||
|| pl01.cs.washington.edu         || planetlab4.clemson.edu         || server=10.42.107.104 ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install pyOpenSSL patch
cd
rm -rf ~/gigaweb
mkdir -p ~/gigaweb/docroot

cd ~/gigaweb
wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py
wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch
patch httpsd.py httpsd.py.patch
rm httpsd.py.patch

cd ~/gigaweb/docroot
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

cd ~/gigaweb
openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024
openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr
openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt
openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key
mv -f decrypted.localhost.localdomain.key localhost.localdomain.key
cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem
rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/gigaweb/docroot
python ../httpsd.py $server 4107
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
cd
rm -rf ~/gigaweb
mkdir ~/gigaweb
cd ~/gigaweb
while true ; do wget --no-check-certificate https://$server:4107/substrate.doc -O substrate.doc ; echo -n "md5sum: " ; md5sum substrate.doc ; rm substrate.doc ; done
}}}

== Results ==

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

planetlab5.clemson.edu:

{{{
}}}

pl5.myplc.grnoc.iu.edu:

{{{
}}}

plnode1.cip.gatech.edu:

{{{
}}}

pl01.cs.washington.edu:

{{{
}}}

== Analysis ==

''(forthcoming)''

= plastic-108 =

[PlasticSlices/Experiments#GigaWeb GigaWeb], using count=40, port=4108, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| wings-openflow-3.wail.wisc.edu || of-planet4.stanford.edu        || server=10.42.108.93  ||
|| of-planet3.stanford.edu        || orbitplc1.orbit-lab.org        || server=10.42.108.111 ||
|| orbitplc2.orbit-lab.org        || pl5.myplc.grnoc.iu.edu         || server=10.42.108.73  ||
|| pl4.myplc.grnoc.iu.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.108.95  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install pyOpenSSL patch
cd
rm -rf ~/gigaweb
mkdir -p ~/gigaweb/docroot

cd ~/gigaweb
wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py
wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch
patch httpsd.py httpsd.py.patch
rm httpsd.py.patch

cd ~/gigaweb/docroot
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

cd ~/gigaweb
openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024
openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr
openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt
openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key
mv -f decrypted.localhost.localdomain.key localhost.localdomain.key
cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem
rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/gigaweb/docroot
python ../httpsd.py $server 4108
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
cd
rm -rf ~/gigaweb
mkdir ~/gigaweb
cd ~/gigaweb
while true ; do wget --no-check-certificate https://$server:4108/substrate.doc -O substrate.doc ; echo -n "md5sum: " ; md5sum substrate.doc ; rm substrate.doc ; done
}}}

== Results ==

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

wings-openflow-3.wail.wisc.edu:

{{{
}}}

of-planet3.stanford.edu:

{{{
}}}

orbitplc2.orbit-lab.org:

{{{
}}}

pl4.myplc.grnoc.iu.edu:

{{{
}}}

== Analysis ==

''(forthcoming)''

= plastic-109 =

[PlasticSlices/Experiments#GigaNetcat GigaNetcat], using count=25, port=6109, file=substrate.doc, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| navis.gpolab.bbn.com           || pl5.myplc.grnoc.iu.edu         || server=10.42.109.73  ||
|| pl4.myplc.grnoc.iu.edu         || pl02.cs.washington.edu         || server=10.42.109.81  ||
|| pl01.cs.washington.edu         || planetlab5.clemson.edu         || server=10.42.109.105 ||
|| planetlab4.clemson.edu         || of-planet1.stanford.edu        || server=10.42.109.90  ||
|| of-planet2.stanford.edu        || wings-openflow-3.wail.wisc.edu || server=10.42.109.96  ||
|| wings-openflow-2.wail.wisc.edu || ganel.gpolab.bbn.com           || server=10.42.109.51  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install nc
mkdir -p ~/giganetcat
cd ~/giganetcat
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc
}}}

== One-time prep commands run on each client ==

{{{
sudo yum -y install nc
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/giganetcat
while true ; do nc -l $server 6109 < substrate.doc ; done
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
cd
rm -rf ~/giganetcat
mkdir ~/giganetcat
cd ~/giganetcat
while true ; do nc $server 6109 > substrate.doc ; echo -n "$(date "+%F %T")  " ; md5sum substrate.doc ; rm substrate.doc ; done
}}}

== Results ==

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

navis.gpolab.bbn.com:

{{{
}}}

pl4.myplc.grnoc.iu.edu:

{{{
}}}

pl01.cs.washington.edu:

{{{
}}}

planetlab4.clemson.edu:

{{{
}}}

of-planet2.stanford.edu:

{{{
}}}

wings-openflow-2.wail.wisc.edu:

{{{
}}}

== Analysis ==

''(forthcoming)''

= plastic-110 =

[PlasticSlices/Experiments#GigaNetcat GigaNetcat], using count=25, port=6110, file=substrate.doc, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| gardil.gpolab.bbn.com          || pl01.cs.washington.edu         || server=10.42.110.80  ||
|| pl02.cs.washington.edu         || of-planet3.stanford.edu        || server=10.42.110.92  ||
|| of-planet4.stanford.edu        || orbitplc2.orbit-lab.org        || server=10.42.110.112 ||
|| orbitplc1.orbit-lab.org        || pl4.myplc.grnoc.iu.edu         || server=10.42.110.72  ||
|| pl5.myplc.grnoc.iu.edu         || plnode1.cip.gatech.edu         || server=10.42.110.100 ||
|| plnode2.cip.gatech.edu         || sardis.gpolab.bbn.com          || server=10.42.110.53  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install nc
mkdir -p ~/giganetcat
cd ~/giganetcat
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc
}}}

== One-time prep commands run on each client ==

{{{
sudo yum -y install nc
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/giganetcat
while true ; do nc -l $server 6110 < substrate.doc ; done
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
cd
rm -rf ~/giganetcat
mkdir ~/giganetcat
cd ~/giganetcat
while true ; do nc $server 6110 > substrate.doc ; echo -n "$(date "+%F %T")  " ; md5sum substrate.doc ; rm substrate.doc ; done
}}}

== Results ==

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

gardil.gpolab.bbn.com:

{{{
}}}

pl02.cs.washington.edu:

{{{
}}}

of-planet4.stanford.edu:

{{{
}}}

orbitplc1.orbit-lab.org:

{{{
}}}

pl5.myplc.grnoc.iu.edu:

{{{
}}}

plnode2.cip.gatech.edu:

{{{
}}}

== Analysis ==

''(forthcoming)''