Back to the [[wiki:Integration GENI Integration Page]]
[[PageOutline]]

= Overview =
The PlanetLab cluster has nodes in I2's WASH PoP (!McLean, VA) and I2's SALT PoP (Salt Lake City, UT).  Kansas City (KANS) should be installed and tested in September of 2009.  


[[BR]][[BR]][[BR]]


= !McLean, VA (WASH) =

[[Image(I2PoPWASH:I2WASHRACKS.jpg, width=300)]][[BR]]
Photo of ProtoGENI/MAX deployment at I2 courtesy of Chris Tracy
[[PageOutline]]

== Reaching SPP == 
The SPP node at I2 WASH is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch.  SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch.

IP addresses have been assigned out of prefix 64.57.23.160/28.

=== Technical Contacts ===
 * John !DeHart (best to contact first) jdd@arl.wustl.edu
 * David Zar dzar@wustl.edu
[[BR]] 

=== IP Addresses ===

''The following addresses are only available to SPP administrators:''

|| Device || DNS || Purpose || IP ||
|| I2 Juniper T640 Router || || Gateway || 64.57.23.161 ||
|| R200 Control Processor || || || 64.57.23.167  ||




=== VLAN IDs ===

|| Device || Port || Purpose || VLAN ID ||
|| Radisys 7010 || 1 || Test Network with ProtoGENI || 3001 ||
|| Radisys 7010 || 2 || Test Network with ProtoGENI || 3001 ||
|| Radisys 7010 || 3 || Test Network with ProtoGENI || 3002 ||
|| Radisys 7010 || 4 || Test Network with ProtoGENI || 3002 ||
|| Radisys 7010 || 5 || Test Network with ProtoGENI || 3003 ||
|| Radisys 7010 || 6 || Test Network with ProtoGENI || 3003 ||
[[BR]][[BR]]
== Equipment ==

=== Dell R200 Control Processor ===
  [[Image(spp-dell-front.jpg,width=300,align=right)]]

|| Port || Destination Device || Dst. Port ||
|| A || GPE2 || A ||
|| B || GPE1 || B ||
|| C || Netgear Console ||
|| D || ATCA || D ||
|| E || Radisys ATCA 2210 || E ||

=== Netgear Prosafe switch (GSM7328S) ===
[[Image(spp-netgear-front.jpg,width=300,align=right)]]

|| Port || Destination Device || Dst. Port ||
|| Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 ||
|| Console || Control Processor || C ||
|| 1 || Control Processor || NetFPGA 0 ||
|| 2 || Control Processor || NetFPGA 1 ||
|| 3 || Control Processor || NetFPGA 2 ||
|| 4 || Control Processor || NetFPGA 3 ||
 

=== ATCA Chassis ===
  [[Image(SPP-Backbone-Node.jpg,width=250,align=right)]]

==== Slot 6 - Radisys ATCA 7010 (LC) ====
|| Port || Destination Device || Dst. Port ||
|| 1 (back) || ProtoGENI !ProCurve || A17 ||
|| 2 (back) || ProtoGENI !ProCurve || A18 ||
|| 3 (back) || ProtoGENI !ProCurve || A19 ||
|| 4 (back) || ProtoGENI !ProCurve || A20 ||
|| 5 (back) || ProtoGENI !ProCurve || A21 ||
|| 6 (back) || ProtoGENI !ProCurve || A22 ||
|| 8 (back) || I2 !ProCurve || 8 ||
|| 9 (back) || I2 !ProCurve || 9 ||
|| 10 (back) || I2 !ProCurve || 10 ||
|| NPU-B || Radisys 2210 || SFP 1/7 ||

==== Slot 5 - Radisys ATCA 7010 (NPE) ====
[[Image(spp-node-front.jpg,width=200,align=right)]]  [[Image(spp-node-back.jpg,width=200,align=right)]]
|| Port || Destination Device || Dst. Port || 
|| NPU-B || Radisys 2210 || SFP 1/8 ||

==== Slot 4 - GPE2 ====
|| Port || Destination Device || Dst. Port ||
|| A || Control Processor || A ||


==== Slot 3 - GPE1 ====
|| Port || Destination Device || Dst. Port ||
|| B || Control Processor || B ||

==== Slot 2 - Empty ====

==== Slot 1 - Radisys ATCA 2210 ====
|| Port || Destination Device || Dst. Port ||
|| SFP 3/1 (back) || Control Processor || 1 ||
|| XFP 1/4 || Netgear switch mm lc-lc || module 1 ||
|| SFP 1/6 || Processor || 2 ||
|| SFP 1/7 || LC || NPU-B ||
|| SFP 1/8 || NPE || NPU-B ||
|| E || Control Processor || E ||


[[BR]][[BR]][[BR]]


== Reaching MAX ==
[[PageOutline]]

[[BR]][[BR]]
== Equipment ==
A typical MAX node (from MAX's GENI wiki):[[BR]]
 [[Image(typical-dragon-node-diagram.png,width=300)]] [[Image(typical-dragon-node-equipment.png,width=300)]]

MAX is connected to ProtoGENI as shown in the following diagram (thanks to Chris Tracy for the diagram):[[BR]]
 [[Image(MAX2ProtoATWash.jpg,width=300)]]
[[BR]][[BR]]
== Technical Contacts ==



[[BR]][[BR]][[BR]]






= Salt Lake City, UT (SALT) =
[[PageOutline]]

== Reaching SPP == 
The SPP node at I2 SALT is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch.  SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch.

IP addresses have been assigned out of prefix 64.57.23.144/28. The gateway is 64.57.23.145 (Juniper T640 router).


=== Technical Contacts ===
 * John !DeHart (best to contact first) jdd@arl.wustl.edu
 * David Zar dzar@wustl.edu
[[BR]] 

=== IP Addresses ===

''The following addresses are only available to SPP administrators:''

|| Device || DNS || Purpose || IP ||
|| I2 Juniper T640 || || Gateway || 64.57.23.145 ||
|| R200 Control Processor || || || 64.57.23.151  ||
|| SPP Network Processor || || || 64.57.23.210/30 ||
|| SPP Network Processor 2 || || || 64.57.23.214/30 ||
|| SPP Network Processor 3 || || || 64.57.23.216/30 ||


=== VLAN IDs ===

|| Device || Port || Purpose || VLAN ID ||
|| Radisys 7010 || 1 || Test Network with ProtoGENI || 3008 ||
|| Radisys 7010 || 2 || Test Network with ProtoGENI || 3008 ||
|| Radisys 7010 || 3 || Test Network with ProtoGENI || 3009 ||
|| Radisys 7010 || 4 || Test Network with ProtoGENI || 3009 ||
|| Radisys 7010 || 5 || Test Network with ProtoGENI || 3010 ||
|| Radisys 7010 || 6 || Test Network with ProtoGENI || 3010 ||
|| Radisys 7010 || 7 || Test Network with ProtoGENI || 3011 ||



[[BR]][[BR]]
== Equipment ==

=== Dell R200 Control Processor ===
{{{
#!comment
  [[Image(spp-dell-front.jpg,width=300,align=right)]]
}}}

|| Port || Destination Device || Dst. Port ||
|| A || GPE2 || A ||
|| B || GPE1 || B ||
|| C || Netgear Console ||
|| D || ATCA || D ||
|| E || Radisys ATCA 2210 || E ||
|| 3 || I2 !ProCurve || C11 ||

=== Netgear Prosafe switch (GSM7328S) ===
{{{
#!comment
[[Image(spp-netgear-front.jpg,width=300,align=right)]]
}}}
|| Port || Destination Device || Dst. Port ||
|| Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 ||
|| Console || Control Processor || C ||
|| 1 || Control Processor || NetFPGA 0 ||
|| 2 || Control Processor || NetFPGA 1 ||
|| 3 || Control Processor || NetFPGA 2 ||
|| 4 || Control Processor || NetFPGA 3 ||
 

=== ATCA Chassis ===
{{{
#!comment
  [[Image(SPP-Backbone-Node.jpg,width=250,align=right)]]
}}}
==== Slot 6 - Radisys ATCA 7010 (LC) ====
|| Port || Destination Device || Dst. Port ||
|| 1 (back) || ProtoGENI !ProCurve || C14 ||
|| 2 (back) || ProtoGENI !ProCurve || C15 ||
|| 3 (back) || ProtoGENI !ProCurve || C16 ||
|| 4 (back) || ProtoGENI !ProCurve || C17 ||
|| 5 (back) || ProtoGENI !ProCurve || C18 ||
|| 6 (back) || ProtoGENI !ProCurve || C19 ||
|| 7 (back) || ProtoGENI !ProCurve || C20 ||
|| 8 (back) || I2 !ProCurve || C8 ||
|| 9 (back) || I2 !ProCurve || C9 ||
|| 10 (back) || I2 !ProCurve || C10 ||
|| NPU-B || Radisys 2210 || SFP 1/7 ||

==== Slot 5 - Radisys ATCA 7010 (NPE) ====
{{{
#!comment
[[Image(spp-node-front.jpg,width=200,align=right)]]  [[Image(spp-node-back.jpg,width=200,align=right)]]
}}}
|| Port || Destination Device || Dst. Port || 
|| NPU-B || Radisys 2210 || SFP 1/8 ||

==== Slot 4 - GPE2 ====
|| Port || Destination Device || Dst. Port ||
|| A || Control Processor || A ||


==== Slot 3 - GPE1 ====
|| Port || Destination Device || Dst. Port ||
|| B || Control Processor || B ||

==== Slot 2 - Empty ====

==== Slot 1 - Radisys ATCA 2210 ====
|| Port || Destination Device || Dst. Port ||
|| SFP 3/1 (back) || Control Processor || 1 ||
|| XFP 1/4 || Netgear switch mm lc-lc || module 1 ||
|| SFP 1/6 || Processor || 2 ||
|| SFP 1/7 || LC || NPU-B ||
|| SFP 1/8 || NPE || NPU-B ||
|| E || Control Processor || E ||


[[BR]][[BR]][[BR]]