Back to the [[wiki:Integration GENI Integration Page]] [[PageOutline]] = Overview = The PlanetLab cluster has nodes in I2's WASH PoP (!McLean, VA). Further I2 deployments are planned for Kansas City (KANS) and Salt Lake City (SALT) in September of 2009. [[BR]][[BR]][[BR]] = !McLean, VA (WASH) = [[Image(I2PoPWASH:I2WASHRACKS.jpg, width=300)]][[BR]] Photo of ProtoGENI/MAX deployment at I2 courtesy of Chris Tracy [[PageOutline]] == Reaching SPP == The SPP node at I2 WASH is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch. SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch. IP addresses have been assigned out of prefix 64.57.23.160/28. The gateway is 64.57.23.161 (Juniper T640 router). === Technical Contacts === * John !DeHart (best to contact first) jdd@arl.wustl.edu * David Zar dzar@wustl.edu [[BR]] === IP Addresses === ''The following addresses are only available to SPP administrators:'' || Device || DNS || Purpose || IP || || R200 Control Processor || || || 64.57.23.167 || === VLAN IDs === || Device || Port || Purpose || VLAN ID || || Radisys 7010 || 1 || Test Network with ProtoGENI || 3001 || || Radisys 7010 || 2 || Test Network with ProtoGENI || 3001 || || Radisys 7010 || 3 || Test Network with ProtoGENI || 3002 || || Radisys 7010 || 4 || Test Network with ProtoGENI || 3002 || || Radisys 7010 || 5 || Test Network with ProtoGENI || 3003 || || Radisys 7010 || 6 || Test Network with ProtoGENI || 3003 || [[BR]][[BR]] == Equipment == === Dell R200 Control Processor === [[Image(I2PoPWASH:spp-dell-front.jpg,width=300,align=right)]] || Port || Destination Device || Dst. Port || || A || GPE2 || A || || B || GPE1 || B || || C || Netgear Console || || D || ATCA || D || || E || Radisys ATCA 2210 || E || === Netgear Prosafe switch (GSM7328S) === [[Image(I2PoPWASH:spp-netgear-front.jpg,width=300,align=right)]] || Port || Destination Device || Dst. Port || || Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 || || Console || Control Processor || C || || 1 || Control Processor || NetFPGA 0 || || 2 || Control Processor || NetFPGA 1 || || 3 || Control Processor || NetFPGA 2 || || 4 || Control Processor || NetFPGA 3 || === ATCA Chassis === [[Image(I2PoPWASH:SPP-Backbone-Node.jpg,width=250,align=right)]] ==== Slot 6 - Radisys ATCA 7010 (LC) ==== || Port || Destination Device || Dst. Port || || 1 (back) || ProtoGENI !ProCurve || A17 || || 2 (back) || ProtoGENI !ProCurve || A18 || || 3 (back) || ProtoGENI !ProCurve || A19 || || 4 (back) || ProtoGENI !ProCurve || A20 || || 5 (back) || ProtoGENI !ProCurve || A21 || || 6 (back) || ProtoGENI !ProCurve || A22 || || 8 (back) || I2 !ProCurve || 8 || || 9 (back) || I2 !ProCurve || 9 || || 10 (back) || I2 !ProCurve || 10 || || NPU-B || Radisys 2210 || SFP 1/7 || ==== Slot 5 - Radisys ATCA 7010 (NPE) ==== [[Image(I2PoPWASH:spp-node-front.jpg,width=200,align=right)]] [[Image(I2PoPWASH:spp-node-back.jpg,width=200,align=right)]] || Port || Destination Device || Dst. Port || || NPU-B || Radisys 2210 || SFP 1/8 || ==== Slot 4 - GPE2 ==== || Port || Destination Device || Dst. Port || || A || Control Processor || A || ==== Slot 3 - GPE1 ==== || Port || Destination Device || Dst. Port || || B || Control Processor || B || ==== Slot 2 - Empty ==== ==== Slot 1 - Radisys ATCA 2210 ==== || Port || Destination Device || Dst. Port || || SFP 3/1 (back) || Control Processor || 1 || || XFP 1/4 || Netgear switch mm lc-lc || module 1 || || SFP 1/6 || Processor || 2 || || SFP 1/7 || LC || NPU-B || || SFP 1/8 || NPE || NPU-B || || E || Control Processor || E || [[BR]][[BR]][[BR]]