Changes between Initial Version and Version 1 of PlanetLabBackbone


Ignore:
Timestamp:
09/04/09 17:39:32 (11 years ago)
Author:
Josh Karlin
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • PlanetLabBackbone

    v1 v1  
     1Back to the [[wiki:IntegrationTemp GENI Integration Page]]
     2[[PageOutline]]
     3
     4= Overview =
     5The PlanetLab cluster has nodes in I2's WASH PoP (!McLean, VA).  Further I2 deployments are planned for Kansas City (KANS) and Salt Lake City (SALT) in September of 2009. 
     6
     7
     8[[BR]][[BR]][[BR]]
     9
     10
     11= !McLean, VA (WASH) =
     12
     13[[Image(I2PoPWASH:I2WASHRACKS.jpg, width=300)]][[BR]]
     14Photo of ProtoGENI/MAX deployment at I2 courtesy of Chris Tracy
     15[[PageOutline]]
     16
     17== Reaching SPP ==
     18The SPP node at I2 WASH is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch.  SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch.
     19
     20IP addresses have been assigned out of prefix 64.57.23.160/28. The gateway is 64.57.23.161 (Juniper T640 router).
     21
     22
     23=== Technical Contacts ===
     24 * John !DeHart (best to contact first) jdd@arl.wustl.edu
     25 * David Zar dzar@wustl.edu
     26[[BR]]
     27
     28=== IP Addresses ===
     29
     30''The following addresses are only available to SPP administrators:''
     31
     32|| Device || DNS || Purpose || IP ||
     33|| R200 Control Processor || || || 64.57.23.167  ||
     34
     35
     36
     37
     38=== VLAN IDs ===
     39
     40|| Device || Port || Purpose || VLAN ID ||
     41|| Radisys 7010 || 1 || Test Network with ProtoGENI || 3001 ||
     42|| Radisys 7010 || 2 || Test Network with ProtoGENI || 3001 ||
     43|| Radisys 7010 || 3 || Test Network with ProtoGENI || 3002 ||
     44|| Radisys 7010 || 4 || Test Network with ProtoGENI || 3002 ||
     45|| Radisys 7010 || 5 || Test Network with ProtoGENI || 3003 ||
     46|| Radisys 7010 || 6 || Test Network with ProtoGENI || 3003 ||
     47[[BR]][[BR]]
     48== Equipment ==
     49
     50=== Dell R200 Control Processor ===
     51  [[Image(I2PoPWASH:spp-dell-front.jpg,width=300,align=right)]]
     52
     53|| Port || Destination Device || Dst. Port ||
     54|| A || GPE2 || A ||
     55|| B || GPE1 || B ||
     56|| C || Netgear Console ||
     57|| D || ATCA || D ||
     58|| E || Radisys ATCA 2210 || E ||
     59
     60=== Netgear Prosafe switch (GSM7328S) ===
     61[[Image(I2PoPWASH:spp-netgear-front.jpg,width=300,align=right)]]
     62
     63|| Port || Destination Device || Dst. Port ||
     64|| Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 ||
     65|| Console || Control Processor || C ||
     66|| 1 || Control Processor || NetFPGA 0 ||
     67|| 2 || Control Processor || NetFPGA 1 ||
     68|| 3 || Control Processor || NetFPGA 2 ||
     69|| 4 || Control Processor || NetFPGA 3 ||
     70 
     71
     72=== ATCA Chassis ===
     73  [[Image(I2PoPWASH:SPP-Backbone-Node.jpg,width=250,align=right)]]
     74
     75==== Slot 6 - Radisys ATCA 7010 (LC) ====
     76|| Port || Destination Device || Dst. Port ||
     77|| 1 (back) || ProtoGENI !ProCurve || A17 ||
     78|| 2 (back) || ProtoGENI !ProCurve || A18 ||
     79|| 3 (back) || ProtoGENI !ProCurve || A19 ||
     80|| 4 (back) || ProtoGENI !ProCurve || A20 ||
     81|| 5 (back) || ProtoGENI !ProCurve || A21 ||
     82|| 6 (back) || ProtoGENI !ProCurve || A22 ||
     83|| 8 (back) || I2 !ProCurve || 8 ||
     84|| 9 (back) || I2 !ProCurve || 9 ||
     85|| 10 (back) || I2 !ProCurve || 10 ||
     86|| NPU-B || Radisys 2210 || SFP 1/7 ||
     87
     88==== Slot 5 - Radisys ATCA 7010 (NPE) ====
     89[[Image(I2PoPWASH:spp-node-front.jpg,width=200,align=right)]]  [[Image(I2PoPWASH:spp-node-back.jpg,width=200,align=right)]]
     90|| Port || Destination Device || Dst. Port ||
     91|| NPU-B || Radisys 2210 || SFP 1/8 ||
     92
     93==== Slot 4 - GPE2 ====
     94|| Port || Destination Device || Dst. Port ||
     95|| A || Control Processor || A ||
     96
     97
     98==== Slot 3 - GPE1 ====
     99|| Port || Destination Device || Dst. Port ||
     100|| B || Control Processor || B ||
     101
     102==== Slot 2 - Empty ====
     103
     104==== Slot 1 - Radisys ATCA 2210 ====
     105|| Port || Destination Device || Dst. Port ||
     106|| SFP 3/1 (back) || Control Processor || 1 ||
     107|| XFP 1/4 || Netgear switch mm lc-lc || module 1 ||
     108|| SFP 1/6 || Processor || 2 ||
     109|| SFP 1/7 || LC || NPU-B ||
     110|| SFP 1/8 || NPE || NPU-B ||
     111|| E || Control Processor || E ||
     112
     113[[BR]][[BR]][[BR]]
     114
     115