Changes between Version 3 and Version 4 of PaperOSRMethodology/Design


Ignore:
Timestamp:
09/30/14 10:00:18 (9 years ago)
Author:
sedwards@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • PaperOSRMethodology/Design

    v3 v4  
    205205
    206206=== 3.2 Reserve Topology ===
    207 The Portal is integrated with a tool, Flack, which allows you to draw topologies of GENI resources and then reserve them.
     207The Portal can reserve pre-defined topologies of GENI resources.
    208208
    209209
     
    215215       <td >
    216216         <ol  type='a'>
    217             <li>On the <i>Slice</i> tab, press the <b>Flack</b> button.  Flack will open in a new tab.</li>
     217            <li>On the <i>Slice</i> tab, press the <b>Add
     218       Resources</b> button. </li>
     219            <li>Select the '''OSPF_4node''' RSpec. </li>
     220            <li>Select the '''UtahDDC InstaGENI''' Aggregate (or
     221       Site). </li>
     222            <li>Reserve the resources. </li>
    218223          </ol>
    219224       </td>
     
    223228<br />
    224229         <b>Figure 3-3</b> <i>Launch Flack</i>
    225        </td>
    226     </tr>
    227       <tr>
    228 
    229        <td >
    230          <ol  type='a' start='2'>
    231             <li>Wait for Flack to load.  You should see: your username, the slice name, and a list of aggregates.  Flack should look like the picture to the right.</li>
    232           </ol>
    233        </td>
    234        <td>
    235 
    236         <img border="0" src="http://groups.geni.net/geni/attachment/wiki/GEC17Agenda/GettingStartedWithGENI_I/Graphics/Flack_login_v1.png?format=raw" alt="Flack"  width="400" title="Flack" />
    237 <br />
    238          <b>Figure 3-4</b> <i>Flack after it has loaded.</i>
    239        </td>
    240     </tr>
    241     <tr>
    242        <td >
    243          <ol  type='a' start='3'>
    244             <li>Find the aggregate listed on your worksheet.  </li>
    245             <li>Click the <b>VM</b> box next to that aggregate and drag it onto the canvas.</li>
    246             <li>Repeat the above step.  You should now see two VM boxes on the canvas.</li>
    247             <li>Now click near one of the VM boxes on the canvas, then click and drag towards the other VM.  Release when you reach the other VM.  You should now see a line and a box representing a link connecting the two VMs.</li>
    248             <li>The canvas should now look like the picture on the right.</li>
    249             <li>To edit the name of each VM, click the <b>i</b> in the circle.</li>
    250           </ol>
    251        </td>
    252        <td>
    253 
    254         <img border="0" src="http://groups.geni.net/geni/attachment/wiki/GEC17Agenda/GettingStartedWithGENI_I/Graphics/oneam_twovmlink_highlight_v2.png?format=raw" alt="Two VMs connected by a link."  width="400" title="Two VMs connected by a link." />
    255 <br />
    256          <b>Figure 3-5</b> <i>Two VMs connected by a link.</i>
    257        </td>
    258     </tr>
    259       <tr>
    260 
    261        <td >
    262          <ol  type='a' start='9'>
    263 
    264 
    265             <li>In the field at the top, replace "VM" with "client".</li>
    266 
    267          </ol>
    268        </td>
    269        <td>
    270 
    271         <img border="0" src="http://groups.geni.net/geni/attachment/wiki/GEC17Agenda/GettingStartedWithGENI_I/Graphics/label_client_EG_highlight_v2.png?format=raw" alt="Relabel VM"  width="400" title="Relabel VM" />
    272 <br />
    273          <b>Figure 3-6</b> <i>Edit the name of the VM.  Set the Sliver Type on ExoGENI racks.</i>
    274        </td>
    275     </tr>
    276     <tr>
    277        <td >
    278          <ol  type='a' start='10'>
    279             <li>Now click on "Interfaces and Links" (this is the middle tab with the "link" symbol").</li>
    280             <li>Enter an IP Address for this node of <i>10.1.1.1</i>.</li>
    281             <li>Enter a Mask of <i>255.255.255.0</i>.</li>
    282             <li>Then Press "Apply" at the bottom of the screen.</li>
    283             <li>Repeat the above six steps for the second VM, labeling it "server" and setting the server's IP Address to <i>10.1.1.2</i> and a Mask of <i>255.255.255.0</i>.</li>
    284           </ol>
    285        </td>
    286        <td>
    287 
    288         <img border="0" src="http://groups.geni.net/geni/attachment/wiki/GEC17Agenda/GettingStartedWithGENI_I/Graphics/label_client_IP_highlight_v3.png?format=raw" alt="Relabel VM"  width="400" title="Relabel VM" />
    289 <br />
    290          <b>Figure 3-7</b> <i>Edit the IP Address and Mask of the VM. </i>
    291        </td>
    292     </tr>
    293 
    294 
    295     <tr>
    296        <td >
    297          <ol  type='a' start='15'>
    298             <li>Click the Submit button near the bottom of the page.  When prompted, confirm you want to actually reserve resources. </li>
    299           </ol>
    300        </td>
    301        <td>
    302 
    303         <img border="0" src="http://groups.geni.net/geni/attachment/wiki/GEC17Agenda/GettingStartedWithGENI_I/Graphics/oneam_twovmlink_labeled_highlight_v1.png?format=raw" alt="Two VMs connected by a link"  width="400" title="Two VMs connected by a link" />
    304 <br />
    305          <b>Figure 3-8</b> <i>Two VMs connected by a link.</i>
    306230       </td>
    307231    </tr>