| 3 | | This page lists the event types for different measurement events for the different monitored objects. These are queried through the REST API as described at [wiki:OperationalMonitoring/DataSchema20#Time-seriesmeasurementscallandresponse Time-series measurements]. |
| 4 | | |
| 5 | | Node: |
| 6 | | * cpu_util (percent) |
| 7 | | * mem_used_kb (kilobytes) |
| 8 | | * swap_free (percent) |
| 9 | | * is_available (boolean) |
| 10 | | * disk_part_max_used (percent) |
| 11 | | * num_vms_allocated (count) |
| 12 | | |
| 13 | | Aggregate: |
| 14 | | * is_available (boolean) |
| 15 | | * routable_ip_available (count) |
| 16 | | |
| 17 | | Interface: |
| 18 | | * rx_bps (bits per sec) |
| 19 | | * tx_bps (bits per sec) |
| 20 | | * rx_pps (packets per sec) |
| 21 | | * tx_pps (packets per sec) |
| 22 | | * rx_eps (packet errors per sec) |
| 23 | | * tx_eps (packet errors per sec) |
| 24 | | * rx_dps (packet drops per sec) |
| 25 | | * tx_dps (packet drops per sec) |
| 26 | | * For WiMAX: |
| 27 | | * tx_power (dBM) |
| 28 | | * tx_frequency (Mhz) |
| 29 | | * wmx_noc (number of clients) |
| 30 | | |
| 31 | | Interface-VLAN: |
| 32 | | * rx_bps (bits per sec) |
| 33 | | * tx_bps (bits per sec) |
| 34 | | * rx_pps (packets per sec) |
| 35 | | * tx_pps (packets per sec) |
| 36 | | * rx_eps (packet errors per sec) |
| 37 | | * tx_eps (packet errors per sec) |
| 38 | | * rx_dps (packet drops per sec) |
| 39 | | * tx_dps (packet drops per sec) |
| 40 | | |
| 41 | | Experiment: |
| 42 | | * ping_rtt_ms (milliseconds) |
| | 2 | Moved http://groups.geni.net/geni/wiki/OperationalMonitoring/MeasurementEvents |
