Changes between Version 33 and Version 34 of OpenFlow/Slicer/TestPlan


Ignore:
Timestamp:
04/22/15 17:23:55 (5 years ago)
Author:
tupty@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • OpenFlow/Slicer/TestPlan

    v33 v34  
    8686
    8787=== Step 7: Test for any extra functionality ===
    88  a. Test that any documented control plane performance isolation solution works as expected.  Consider using the following modules from OFTest: PacketInLoad, FlowModLoad, PacketOutLoad, FlowRemovedLoad. ''(011)''
     88 a. Test that any documented control plane performance isolation solution works as expected.  If applicable, try testing packet-in rates and packet-out rates. ''(011)''
    8989 b. Test that any documented data plane performance isolation solution works as expected.  This will involve appropriately setting up two slices, proactively installing flows, and starting UDP iperfs to make sure expected throughput is matched. ''(012)''
    9090 c. Test that any per-slice flow limits work as expected.  Consider using the OFTest FlowModLoad test or Floodlight static flow pusher. ''(012)''