Changes between Version 30 and Version 31 of OpenFlow/Slicer/TestPlan/Results/FlowspaceFirewall/1.0.4b
- Timestamp:
- 05/08/15 17:02:23 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
OpenFlow/Slicer/TestPlan/Results/FlowspaceFirewall/1.0.4b
v30 v31 106 106 || 3.c. ||[[Color(green,Pass)]]|| || 107 107 || 3.d. ||[[Color(green,Pass)]]|| || 108 || 3.e. ||[[Color(red,Fail)]]||[attachment:flows.json Substrate flows], flows with testslice's VLAN ID of 200 still exist. This should be somewhat fixed in the next release with a granularity of the FSFW flow stat polling rate.|| 108 || 3.e. ||[[Color(green,Pass)]]||[attachment:flows.json Substrate flows], no flows with testslice's VLAN ID of 200|| 109 109 110 110 111 === Step 4: Substrate-generated traffic === … … 122 123 123 124 == Logs == 124 This test was run using GENI and virtual switches. 125 This test was run using GENI and virtual switches. Parts of test case 3 were changed after this run. 125 126 126 127 = OF-OPR-SLCR-OP Testing (in hardware testbed) = … … 141 142 || 3.c. ||[[Color(green,Pass)]]|| || 142 143 || 3.d. ||[[Color(green,Pass)]]|| || 143 || 3.e. ||[[Color( green,Pass)]]||[attachment:flows.2.json Substrate flows], no flows with testslice's VLAN ID of 200||144 || 3.e. ||[[Color(red,Fail)]]||[attachment:flows.2.json Substrate flows], flows with testslice's VLAN ID of 200 still exist. This should be somewhat fixed in the next release with a granularity of the FSFW flow stat polling rate.|| 144 145 145 146 === Step 4: Substrate-generated traffic ===