Changes between Version 1 and Version 2 of OpenFlow/GeniBackboneTest


Ignore:
Timestamp:
03/16/12 14:02:55 (12 years ago)
Author:
Josh Smift
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • OpenFlow/GeniBackboneTest

    v1 v2  
    66
    77 * You're only testing the OpenFlow backbone in Internet2 and NLR, and not any GENI core resources at regionals.
    8  * You'll use 10.42.17.0/24 as the IP subnet to test with; this is normally reserved to jbs@bbn.com, so either check with him before using it, or use a different subnet.
     8 * You'll use 10.42.17.0/24 as the IP subnet to test with; this is normally reserved to jbs@bbn.com, so either check with him before using it, or use a different subnet. (The [wiki:NetworkCore/SubnetReservations GENI Network Core subnet reservations page] has a list of available (and reserved) subnets.)
    99 * You're using mesoscale MyPLC plnodes at BBN (via Internet2) and Indiana (via NLR), which have dataplane addresses already configured on this subnet, to send and receive traffic via VLAN 3716 in the core.
    1010 * You're set up to use Omni in general, and have it in your path as 'omni', i.e. you've successfully used Omni to reserve GENI resources (and have the latest version of the software, a user credential signed by a CA that's trusted by the I2 and NLR FOAM aggregates and the GPO Lab MyPLC aggregate, a working omni_config file, etc).