Changes between Version 28 and Version 29 of OpenFlow/FOAM

Timestamp:

08/09/12 14:54:18 (12 years ago)

Author:

Josh Smift

Comment:

--

OpenFlow/FOAM

@@ -42 +42 @@
  * The admin e-mail setting should generally be the same address you used when you set up e-mail. We use foam-admin@gpolab.bbn.com (a list with a couple of admins on it) at BBN.
  * The max lease setting controls how the maximum value of the sliver expiration date (e.g. when an experimenter does a renewsliver). We use 9000 hours (about a year) at BBN, and recommend that; making this short just means that experimenters who want a long-lived sliver have to do a renewsliver more frequently.
+
+We also typically put the FOAM admin password into /opt/foam/etc/foampasswd, so you don't have to type it every time you run a foamctl command. Make sure that it's only readable by people who should have full admin access to FOAM on your system! (World-readable might be fine if only FOAM admins have accounts on your FOAM server; or you might want to make it only group-readable by a group that includes the FOAM admins.)
 
 To set those with foamctl (replace the "value" part with the values you want to use):