Changes between Version 19 and Version 20 of OnTimeMeasureTutorial

Timestamp:

02/16/12 12:43:18 (13 years ago)

Author:

yxu@osc.edu

Comment:

--

OnTimeMeasureTutorial

@@ -7 +7 @@
 [[PageOutline]]
 
-This tutorial provides step-by-step instructions for GENI experimenters to learn about the main I&M capabilities of !OnTimeMeasure software/service that can be used in an integrated manner with  Flack/ProtoGENI, INSTOOLS, Gush, OMNI and !PlanetLab.
+This tutorial provides step-by-step instructions for GENI experimenters to learn about the main Instrumentation and Measurement (I&M) capabilities of !OnTimeMeasure software/service that can be used in an integrated manner with  Flack/ProtoGENI, INSTOOLS, Gush, OMNI and !PlanetLab.
 
 The tutorial organization is shown in below Figure. 
@@ -126 +126 @@
 [[Image(image2.11.jpg)]]
 
-You can skip the "2.3.2 Create Sliver from Scratch" if you use the above import steps, and jump to "2.4 Confirmation" section.
+You can skip the "2.3.2 Create Sliver from Scratch" if you use the above import steps, and jump to the [wiki:OnTimeMeasureTutorial#a2.4Confirmation 2.4 Confirmation] section
+
 
 ==== 2.3.2 Create Sliver from Scratch ====
@@ -224 +225 @@
 !OnTimeMeasure will begin to install when nodes turn green. You will see the domain name of each nodes. You can use Ping or NSlookup tools in any machine to get IP address of each node. 
 
-In this example, the ROOT (Root Beacon) is pc355.emulab.net (155.98.39.155), the NODE1 (Node Beacon 1) is pc337.emulab.net (155.98.39.137). The NODE2 is pc262.emulab.net (155.98.39.62)
+In this example, the ROOT (Root Beacon) is pc355.emulab.net (155.98.39.155), the NODE1 (Node Beacon 1) is pc337.emulab.net (155.98.39.137). The NODE2 is pc262.emulab.net (155.98.39.62). 
 
 [[Image(image2.20.jpg)]]
 
-Please wait about 5 minutes for the installation of the Root Beacon. You can also jump to "Configure !OnTimeControl" section and confirm the Root Beacon installation later.
-
-Confirm the installation of Root Beacon ('''NOTE:''' use port number 17291 in the web-browser URL)
+Please wait about 5 minutes for the installation of the Root Beacon. You can also jump to [wiki:OnTimeMeasureTutorial#a3.ConfigureControlQueryOnTimeMeasureusingCommand-line 3. Configure, Control, Query OnTimeMeasure using Command-line] section and confirm the Root Beacon installation later.
+
+Confirm the installation of Root Beacon ('''NOTE:''' use port number 17291 in the web-browser URL, i.e., http://pc355.emulab.net:17291)
 
 [[Image(image2.21.jpg)]]
 
-Confirm the installation of Node Beacons ('''NOTE:''' use port number 17291 in the web-browser URL of each Node Beacon). 
+Confirm the installation of Node Beacons ('''NOTE:''' use port number 17291 in the web-browser URL of each Node Beacon， i.e., http://pc337.emulab.net:17291 and http://pc262.emulab.net:17291). 
 
 [[Image(image2.22.jpg)]]