Changes between Version 69 and Version 70 of ORBIT


Ignore:
Timestamp:
10/21/09 11:54:22 (10 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • ORBIT

    v69 v70  
    114114
    115115Layer 3 connectivity[[BR]]
    116         WINLAB has existing IP connectivity and public addresses that will also be used for GENI. [[BR]]
    117         NICTA has existing IP connectivity and public addresses that will also be used for GENI. . [[BR]]
     116  WINLAB has existing IP connectivity and public addresses that will also be used for GENI. [[BR]]
     117  NICTA has existing IP connectivity and public addresses that will also be used for GENI. . [[BR]]
    118118       
    119119Layer 2 connectivity - final[[BR]]
     120  WINLAB will connect 1 Gig to Internet2 DCN.  [[BR]]
     121  Path;  via fiber ; via NJEdge; via MAGPI East, 401 Broad Street, 9th floor;  to Internet 2 DCN. [[BR]]
     122  Note:  NLR PoP at MAGPI East is promised, but not yet there.[[BR]]
     123  Contact at WINLAB:  Ivan Seskar [[BR]]
     124  Contact at NJEdge:  Greg Palmer
     125  Contact at Internet 2:  Matt Zekauscas, Bruce Cash   
    120126
    121         WINLAB will connect 1 Gig lambda using fiber; via NJEdge; via MAGPI East, 401 Broad Street, 9th floor;  to Internet 2 DCN. [[BR]] No   
    122 
    123 Additional fiber infrastructure is needed;  one piece has been acquired, one is in place, and a third is planned for completion June 30.  Rutgers has an existing connecton to MAGPI East in Philadelphia.  Connection to NLR or Internet2 TBD. [[BR]]
    124        
    125         (Status on April 1:  The missing fiber link between the Rutgers Food Science building and the Route 1 fiber corridor (~1 mile) will be provisioned by June 30.  We will be creating a 1 Gig lambda for WINLAB in July to our current location at 401 Broad Street in Philadelphia on the 9th floor. From what we've heard to date, GENI is not using the 10Gig Wave, but is using the general Internet2 network;  thus, we should be able to hand off directly to MAGPI in our current location.  In the meantime, we are ready to test L2 connectivity using a VPN over the excess capacity of 400Mbps on Rutgers University's existing commodity feed to L2, if another testbed is available for connection.)  [[BR]]
    126 
    127         NICTA plans connection via [http://www.aarnet.edu.au/ Australian Advanced Research Network] to a PoP in Seattle, with possible connectivity to Internet2 and NLR.  Possible DCN for GENI virtual ethernet connection.  Details TBD.
    128 
    129 
    130         IT contact at WINLAB:  via Ivan Seskar [[BR]]
    131 
    132         IT contact at NICTA:   via Max Ott  [[BR]]
     127  NICTA will connect 1 Gig to Internet2 DCN.  [[BR]]
     128  Path:  via [http://www.aarnet.edu.au/ Australian Advanced Research Network] ;  via LA PoP;  to Internet2 DCN.
     129  Contact at NICTA:   Max Ott  [[BR]]
    133130
    134131