Changes between Version 93 and Version 94 of NetworkCore/SubnetReservations


Ignore:
Timestamp:
07/16/12 14:49:30 (12 years ago)
Author:
Josh Smift
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • NetworkCore/SubnetReservations

    v93 v94  
    33= GENI Network Core subnet reservations =
    44
    5 The [wiki:NetworkCore GENI OpenFlow-controlled network core] is attached to a number of MyPLC-controlled !PlanetLab testbeds. Each node in these testbeds is configured with IP addresses (see [wiki:NetworkCore/SubnetReservations#IPaddresses below] for a table of those addresses) on each of several pre-provisioned dataplane IP subnets. This configuration allows experimenters to reserve slivers on each of these testbeds, reserve !OpenFlow resources, and perform !OpenFlow-based experiments.
     5The [wiki:NetworkCore GENI OpenFlow-controlled network core] is often sliced by IP subnet, so this page tracks which subnets are reserved for what purposes.
     6
     7A set of these subnets (10.42.0.0/16 below) is attached to a number of MyPLC-controlled !PlanetLab testbeds. Each node in these testbeds is configured with IP addresses (see [wiki:NetworkCore/SubnetReservations#IPaddresses below] for a table of those addresses) on each of several pre-provisioned dataplane IP subnets. This configuration allows experimenters to reserve slivers on each of these testbeds, reserve !OpenFlow resources, and perform !OpenFlow-based experiments.
    68
    79The [wiki:HelloGENI] page describes a very simple experiment which you can do by reserving one of these subnets.