[[PageOutline]] The [wiki:NetworkCore GENI OpenFlow-controlled network core] is a Layer 2 network which can be used for non-IP experiments. OpenFlow allows an experimenter to reserve a sliver of non-IP traffic by specifying a non-IP ethernet type in the !OpenFlow reservation. To avoid traffic conflicts, each experimental ethernet type can be used by only one experiment at a time. Here is a reservation list for ethernet types, in the range of 0x2710 - 0x27D8. The ethernet types aren't provided by an aggregate, and thus can't be reserved via the GENI AM API. To reserve one for your experiment, contact `gpo-infra@geni.net`, and let us know when you'd like to start using the subnet (if not "immediately"), and when you expect to be done with it (if you're not sure, give us a date after which we should check back with you to see if you're done). Please DO NOT use an Ethernet Type that you haven't reserved. Thanks! = Current reservations = These sections describe the subnets that are currently reserved. || '''!EthType''' || '''Reserved by/for''' || '''Reserved until''' || || 0x277F|| GEC11 Tutorial|| 2011-08-15 || || 0x2780|| GEC11 Tutorial|| 2011-08-15 || || 0x2781|| GEC11 Tutorial|| 2011-08-15 || || 0x2782|| GEC11 Tutorial|| 2011-08-15 || || 0x2783|| GEC11 Tutorial|| 2011-08-15 || || 0x2784|| GEC11 Tutorial|| 2011-08-15 || || 0x2785|| GEC11 Tutorial|| 2011-08-15 || || 0x2786|| GEC11 Tutorial|| 2011-08-15 || || 0x2787|| GEC11 Tutorial|| 2011-08-15 || || 0x2788|| GEC11 Tutorial|| 2011-08-15 || || 0x2789|| GEC11 Tutorial|| 2011-08-15 || || 0x278A|| GEC11 Tutorial|| 2011-08-15 || || 0x278B|| GEC11 Tutorial|| 2011-08-15 || || 0x278C|| GEC11 Tutorial|| 2011-08-15 || || 0x278D|| GEC11 Tutorial|| 2011-08-15 || || 0x278E|| GEC11 Tutorial|| 2011-08-15 || || 0x278F|| GEC11 Tutorial|| 2011-08-15 || || 0x2790|| GEC11 Tutorial|| 2011-08-15 || || 0x2791|| GEC11 Tutorial|| 2011-08-15 || || 0x2792|| GEC11 Tutorial|| 2011-08-15 || || 0x2793|| GEC11 Tutorial|| 2011-08-15 || || 0x27A0|| Aaron Rosen || 2012-01-31 ||