wiki:LAMP/Tutorial

Version 10 (modified by fernande@cis.udel.edu, 9 years ago) (diff)

--

LAMP I&M System: Tutorial

Welcome to the LAMP Instrumentation & Measurement (I&M) System tutorial. This tutorial will take you through the steps in creating a ProtoGENI slice with Instrumentation & Measurement (I&M) capabilities based on the perfSONAR framework and the perfSONAR-PS software suite. This tutorial and the full documentation for the LAMP I&M System is still under development, but we have made a Quick Start Guide to get you started right away. Please feel free to contact us with questions or any type of feedback at lamp@damsl.cis.udel.edu.

Getting Ready

The LAMP I&M System is currently tailored to characteristics of the ProtoGENI Control Framework. The LAMP I&M System is also limited to the UBUNTU91-LAMP disk image that can be found on Utah's (Emulab.net) ProtoGENI testbed. We intend to create software packages and instructions for customizing existing or new images with the LAMP software. In the meantime, the following steps must be taken prior to testing our system:

  • Get a ProtoGENI account and familiarize yourself with using ProtoGENI. The ProtoGENI tutorial is a great resource for this. Make sure you follow the instructions to get your SSH Keys set up.
  • Download the ProtoGENI test scripts. We will use these to create and start our slice.

Quick Start

This section will guide you through creating and starting a slice, requesting a LAMP services certificate for you slice, uploading your experiment's topology to UNIS, and setting up the instrumentation and measurement facilities of your slice. The expected time required to setup your slice with the LAMP I&M System is around 10 minutes. Following this guide through the end is aimed to take about 30 minutes. Let us know how long it takes you and places for improvement!

Few words on the LAMP I&M System design

It is useful to understand the general principles behind the steps we will take throughout this tutorial. The LAMP I&M System is built on top of three pillars:

  • LAMP Portal: The LAMP Portal is the goto resource for experimenters to manage and visualize their I&M services and data. The portal is deployed with the LAMP image and will usually be enabled through the initial RSpec configuration for the experiment. The portal can run on any node or (nodes) within the slice. The LAMP Portal is derived from the Web Admin component of the pS-Performance Toolkit 3.2 RC1 (although not required, looking at the comprehensive Quick Start guide of the pS Toolkit can be very useful to understand the LAMP I&M System setup).
  • UNIS and Topology-based Configuration: xxxxxxx
  • I&M software (measurement tools and perfSONAR services): xxxxx

All the services on the LAMP I&M System have Authentication and Authorization (AA) capabilities based on the ProtoGENI AA model. See our AA page for more information.

1. Modifying the RSpec

There's only one thing that must be done to have LAMP I&M on your slice: specify the LAMP disk image to be loaded on each node that needs I&M. The URN for the LAMP disk image is urn:publicid:IDN+emulab.net+image+GeniSlices//UBUNTU91-LAMP. See the RSpec Disk Image Example and our tutorial RSpec below for how to specify the disk image to be used on a node.

Nodes booting the LAMP disk image will have all the LAMP services available, but only the topology-based configuration service (pSConfig) will be running by default. This isn't very useful for the experimenter as not even the LAMP Portal will be accessible (remember that you have to specify in which node(s) the portal will be enabled). To make the process simpler to the user, an initial configuration for the slice can be specified on a LAMP extension to the RSpec. Let's see our tutorial's RSpec and go through the different elements to understand how this configuration can be specified. For this Quick Start guide we will use a very simple topology: two nodes will be connected through a link with 100ms latency and 0.05 loss, and a third node with no interfaces (only the control plane interface) will lodge the LAMP Portal (and eventually store host monitoring data). This is our RSpec:

<rspec xmlns="http://protogeni.net/resources/rspec/0.2" 
   xmlns:lamp="http://protogeni.net/resources/rspec/0.2/ext/lamp/1">
   
   <node virtual_id="node1" virtualization_type="raw" exclusive="1">
      <node_type type_name="pc" type_slots="1"/>
      <disk_image name="urn:publicid:IDN+emulab.net+image+GeniSlices//UBUNTU91-LAMP" />
      <lamp:config />
      <interface virtual_id="iface0"/>
   </node>
   
   <node virtual_id="node2" virtualization_type="raw" exclusive="1">
      <node_type type_name="pc" type_slots="1"/>
      <disk_image name="urn:publicid:IDN+emulab.net+image+GeniSlices//UBUNTU91-LAMP" />
      <lamp:config />
      <interface virtual_id="iface0"/>
   </node>
   
   <link virtual_id="link1" >
      <interface_ref virtual_node_id="client1" virtual_interface_id="iface0"/>
      <interface_ref virtual_node_id="client2" virtual_interface_id="iface0"/>
      <link_type type_name="ethernet" />
      <!-- bandwidth>1000000</bandwidth -->
      <latency>100</latency>
      <packet_loss>0.05</packet_loss>
   </link>
   
   <node virtual_id="lamp" virtualization_type="raw" exclusive="1">
      <node_type type_name="pc" type_slots="1"/>
      <disk_image name="urn:publicid:IDN+emulab.net+image+GeniSlices//UBUNTU91-LAMP" />
      <lamp:config>
         <lamp:service type="lamp_portal" enable="true" />
      </lamp:config>
   </node>
</rspec>

Attachments (26)