wiki:KOGEMINITesting

Version 38 (modified by koneil@bbn.com, 11 years ago) (diff)

--

Testing GEMINI on the GENI desktop using different credentials


I began by going through the GENI desktop tutorial but quickly encountered issues. It was later determined that the rspec in the tutorial is from a previous version(v2) and is no longer supported by UNIS.

My emulab.net credentials allowed me to access the the GENI desktop quite easily. Launching flack from these credentials was also straight forward. However, when I tried to initialize my slices the results varied drastically. Sometimes they would easily initialize. Other times I would not be able to initialize at all so I would logout of the desktop and log back in. Then it allowed me to initialize my slice. Often I would get an error telling me that there was no global node found even when there was.

Once my slice was initialized and I was on the desktop, the instrumentize icon didn't appear. Eventually it did appear when I logged out and then back on. A few times the instrumentizing occurred without me pressing the icon. I had a difficult time getting the graphs to appear also but was eventually able to figure it out.

My portal account did not give me easy access into the GENI desktop. I was able to use copy and paste my credentials into it to gain access. Flack did not save these credentials so when it was launched from the desktop it was not ready to use. It asked for certificates that I am still unsure of. The Adobe Flash plugin frequently crashed when Flack was launched under these credentials as well. I am also unable to initialize my slices created through the portal.

Two VMs with GEMINI

rspec

Date Login Create Slice Initialize Instrumentize Generate Graphs
GENI Portal 5/17/13 Passed Failed (no user certificate) Passed* Passed Passed
PGENI Account 5/16/13 Passed Passed Passed Passed Passed (delay sometimes)

*Able to initialize slice created using Flack within the Portal.

Three VMs with GEMINI

rspec

Date Login Create Slice Initialize Instrumentize Generate Graphs
GENI Portal 5/17/13 Passed Failed (no user certificate) Passed Passed Passed
PGENI Account 5/17/13 Passed Passed (1) Passed (inconsistant) Passed Passed

Jeanne's W(4 nodes)

rspec

Date Login Create Slice Initialize Instrumentize Generate Graphs
GENI Portal 5/17/13 Passed Failed (no user certificate) Passed Passed Passed
PGENI Account 5/16/13 Passed Passed Passed Passed Passed

5 VMs in path with GEMINI

rspec

Date Login Create Slice Initialize Instrumentize Generate Graphs
GENI Portal 5/20/13 Passed Failed (no user certificate)PassedPassed Passed
PGENI Account 5/20/13Passed Passed PassedPassed Passed

4 VMs in star with GEMINI

rspec

Date Login Create Slice Initialize Instrumentize Generate Graphs
GENI Portal 5/20/13 Passed Failed (no user certificate) Passed Passed Passed
PGENI Account 5/20/13Passed Passed Passed Passed Passed

4 VMs in diamond on two AM with GEMINI

rspec

Date Login Create Slice Initialize Instrumentize Generate Graphs
GENI Portal 5/20/13 Passed Failed (no user certificate)
PGENI Account 5/20/13Passed Passed Passed Passed Passed

Testing using Firefox on Unbuntu.

(1)Previously the following error would appear at global node:

Error: gethostbyname(UNKNOWN) failed
TMCC exited with status 256!
***WARNING:Could not get boss info from TMCC
*** /usr/local/etc/emulab/rc/rc.bootsetup: Could not determine the name of the boss server!

IRODS: experimenting with iticket

*These tickets are no longer active since we switched servers

On koneil1:

iticket for Two_VMs(read): gjqdnx1jCgIa3Of
with command: iget -t gjqdnx1jCgIa3Of /tempZone/home/koneil1/rspecs/Two_VMs.xml
id: 10032
string: gjqdnx1jCgIa3Of
ticket type: read
obj type: data
owner name: koneil1
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
data-object name: Two_VMs.xml
data collection: /tempZone/home/koneil1/rspecs
No host restrictions
No user restrictions
No group restrictions

iticket for Two_VMs(write):MgQjgYCEF3QcYxD
with command:
id: 10035
string: MgQjgYCEF3QcYxD
ticket type: write
obj type: data
owner name: koneil1
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
data-object name: Two_VMs.xml
data collection: /tempZone/home/koneil1/rspecs
No host restrictions
No user restrictions
No group restrictions

iticket for Five_VMs(5 uses): Szq5EQhyFUBiJLm
with command: iget -t Szq5EQhyFUBiJLm /tempZone/home/koneil1/rspecs/Five_VMs_in_path.xml
id: 10033
string: Szq5EQhyFUBiJLm
ticket type: read
obj type: data
owner name: koneil1
owner zone: tempZone
uses count: 2
uses limit: 5
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
data-object name: Five_VMs_in_path.xml
data collection: /tempZone/home/koneil1/rspecs
No host restrictions
No user restrictions
No group restrictions

iticket for folder ThreeNodes(read): n1aluV2Hfu8u4CH
with command: iget -t n1aluV2Hfu8u4CH /tempZone/home/koneil1/rspecs/ThreeNodes/Three_VMs.xml
Also: xtLtronjIwev5nM
id: 10034
string: n1aluV2Hfu8u4CH
ticket type: read
obj type: collection
owner name: koneil1
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
collection name: /tempZone/home/koneil1/rspecs/ThreeNodes
No host restrictions
No user restrictions
No group restrictions

id: 10041
string: xtLtronjIwev5nM
ticket type: read
obj type: collection
owner name: koneil1
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
collection name: /tempZone/home/koneil1/rspecs/ThreeNodes
No host restrictions
No user restrictions
No group restrictions

iticket for folder ThreeNodes(write): L1rxQbUFVSCgNYT
with command: iput -t L1rxQbUFVSCgNYT FILENAME /tempZone/home/koneil1/rspecs/ThreeNodes/
id: 10042
string: L1rxQbUFVSCgNYT
ticket type: write
obj type: collection
owner name: koneil1
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 3
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
collection name: /tempZone/home/koneil1/rspecs/ThreeNodes
No host restrictions
No user restrictions
No group restrictions

iticket for folder ThreeNodes(read): 1ILfkJjY0DtgB40 (iticket create read/write ThreeNodes)
with command: iget -t n1aluV2Hfu8u4CH /tempZone/home/koneil1/rspecs/ThreeNodes/Three_VMs.xml
id: 10049
string: 1ILfkJj
Y0DtgB40 ticket type: read
obj type: collection
owner name: koneil1
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
collection name: /tempZone/home/koneil1/rspecs/ThreeNodes
No host restrictions
No user restrictions
No group restrictions

On koneil2:

iticket for Sample Doc (write): wX1AOi4X6eoyR8t (iticket create write Sample\ doc.odt)
with command: *
id: 10039
string: wX1AOi4X6eoyR8t
ticket type: write
obj type: data
owner name: koneil2
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
data-object name: Sample doc.odt
data collection: /tempZone/home/koneil2
No host restrictions
No user restrictions
No group restrictions

iticket for Four_VMs (read): TyXFhe7WR5pcRPj (iticket create read Four_VMs_in_star.xml)
with command: iget -t TyXFhe7WR5pcRPj /tempZone/home/koneil2/Four_VMs_in_star.xml
id: 10040
string: TyXFhe7WR5pcRPj
ticket type: read
obj type: data
owner name: koneil2
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
data-object name: Four_VMs_in_star.xml
data collection: /tempZone/home/koneil2
No host restrictions
No user restrictions
No group restrictions

The iget command puts file in currently directory on computer.

On koneil3

iticket for Two_VMs(read): nJa0OcTJHjIoiU3
with command: iget -t nJa0OcTJHjIoiU3 /tempZone/home/koneil3.Two_VMs.xml
id: 10053
string: nJa0OcTJHjIoiU3
ticket type: read
obj type: data
owner name: koneil3
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
data-object name: Two_VMs.xml
data collection: /tempZone/home/koneil3
No host restrictions
No user restrictions
No group restrictions

iticket for folder Folder_for_koneil2(read): VYpmG5yrv0VC4c1 (iticket create read Folder_for_koneil2)
with command: iget -t VYpmG5yrv0VC4c1 /tempZone/home/koneil3/Folder_for_koneil2
id: 10055
string: VYpmG5yrv0VC4c1
ticket type: read
obj type: collection
owner name: koneil3
owner zone: tempZone
uses count: 0
uses limit: 0
write file count: 0
write file limit: 10
write byte count: 0
write byte limit: 0
expire time: none
collection name: /tempZone/home/koneil3/Folder_for_koneil2
No host restrictions
No user restrictions
No group restrictions

"No user certificate" Error photo

"Custom Experiment on InstaGENI with GEMINI"

Tutorial at: http://groups.geni.net/geni/wiki/PhoebusExperimentGEMINI

The following are issues I encountered or suggested clarifications for the tutorial.

-It would be helpful to have instruction on setting up the PATH in the beginning and knowing where it should go.
-When it has the user decrypt their key in step 3, the key name from Portal doesn't match the example.
-Unclear where Flack should be launched from. With the Portal account I had a difficult time launching Flack from protogeni.net/flack. So I launched it from the Portal.
-In step 4 where it states "Click on the "i" on each node to configure additional properties, such as the node name and the desired IP addresses", it would be nice if it told you to click on the grey link tab after initially clicking the "i".
-In step 4 when it instructs on how to enable GEMINI it says: "To allow for GEMINI instrumentation, enable the GEMINI extensions in the right-most tab as shown in the screenshot." I think it would be clearer if it also acknowledged that the icon is a yellow puzzle piece or had an arrow on the screenshot.
-When it's time to renew a slice Omni uses your default project. If that isn't the project you created your slice in, how do you switch projects?
-When I tried to call ./gdesktop-init.py I had to install paramiko using the command "sudo apt-get install python_paramiko".
-When I tried to call ./gdesktop-init.py again I had to use:./gdesktop-init.py -n KOPhoebusTut -f ~/.ssl/geni_cert_portal.pem -k ~/.ssh/geni_key .There is either a different behavior with the GENI CH certificate or the instructions are not quite right. The private cert in the CH cert file does not work to SSH into the nodes.

Attachments (9)

Download all attachments as: .zip