Changes between Version 12 and Version 13 of IMInteroperability/SliceWithGIMIAndGEMINI

Timestamp:

08/02/13 09:34:16 (11 years ago)

Author:

koneil@bbn.com

Comment:

--

IMInteroperability/SliceWithGIMIAndGEMINI

@@ -1 +1 @@
 = GIMI & GEMINI on one InstaGENI slice =
 == Creation: ==
-Start with this [http://groups.geni.net/geni/attachment/wiki/IMInteroperability/SliceWithGIMIAndGEMINI/GIMI5nodeInstaGENInoAM.xml rspec] which was created to use GIMI on InstaGENI. Create a couple slices & use that rspec in Flack with an InstaGENI aggregate. Then add GEMINI extensions through Flack. [http://groups.geni.net/geni/attachment/wiki/IMInteroperability/SliceWithGIMIAndGEMINI/GnGInstaRspec.xml Here] is an example of the final rspec at Utah InstaGENI. Below is the topology created.[[BR]][[BR]][[Image(GnGInstTopology.png, 50%)]][[BR]][[BR]]
+Start with this [http://groups.geni.net/geni/attachment/wiki/IMInteroperability/SliceWithGIMIAndGEMINI/GIMI5nodeInstaGENInoAM.xml rspec] which was created to use GIMI on InstaGENI. Create a couple slices & use that rspec in Flack with an InstaGENI aggregate. Then add GEMINI extensions through Flack. [http://groups.geni.net/geni/attachment/wiki/IMInteroperability/SliceWithGIMIAndGEMINI/GnGInstaRspec.xml Here] is an example of the final rspec at Utah InstaGENI. Below is the topology created.[[BR]][[BR]][[Image(GnGInstTopology.png, 40%)]][[BR]][[BR]]
 
 == GEMINI: == 
@@ -8 +8 @@
 === GENI Desktop: ===  
 Access the GENI Desktop at the following link: [http://genidesktop.netlab.uky.edu/].
-Login to the GENI Desktop using a supported clearinghouse. The GENI Desktop will direct you to your login page. Once you return to the GENI Desktop you will need to give your passphrase that you set when created your SSH key pair. 
-[[BR]][[Image(GENIDesktopLogin.png, 20%)]]  [[Image(GENIDesktopLogin2.png, 30%)]]  [[Image(GENIDesktopLoginSSHPass.png, 24%)]] [[BR]][[BR]]
+Login to the GENI Desktop using a supported clearinghouse. The GENI Desktop will direct you to your login page. Once you return to the GENI Desktop you will need to give your passphrase that you set when created your SSH key pair. [[BR]]
+[[BR]][[Image(GENIDesktopLogin.png, 20%)]]  [[Image(GENIDesktopLogin2.png, 30%)]]  [[Image(GENIDesktopLoginSSHPass.png, 24%)]] [[BR]][[BR]][[BR]][[BR]]
 
 From the GENI Desktop you will be able to see your slices and their status. Click on the slice it want to initialize and the process will begin. 
-[[BR]][[Image(GENIDesktopPickSlice.png, 60%)]] [[BR]] [[BR]] [[Image(GENIDesktopInitialize.png, 40%)]][[BR]]
+[[BR]][[BR]][[Image(GENIDesktopPickSlice.png, 40%)]] [[BR]] [[BR]] [[Image(GENIDesktopInitialize.png, 30%)]][[BR]][[BR]][[BR]][[BR]]
 
 Once your slice has been initialized, click on the instrument to instrumentize your slice.
-[[BR]][[Image(GENIDesktopClickInstrument.png, 30%)]] [[BR]]
+[[BR]][[BR]][[Image(GENIDesktopClickInstrument.png, 30%)]] [[BR]][[BR]][[BR]][[BR]]
 
-Instrumentation will take some time. When it is complete a blue bar will appear at the top of your screen that you must click to reload your slice.
-[[BR]][[Image(GENIDesktopInstrumentized.png, 70%)]] [[BR]]
+Instrumentation will take some time. When it is complete, a blue bar will appear at the top of your screen that you must click to reload your slice.
+[[BR]][[BR]][[Image(GENIDesktopInstrumentized.png, 70%)]] [[BR]][[BR]]
 
 === Gdesktop Scripts: ===
@@ -41 +41 @@
 }}}
 [[BR]]
-
 When your slice finishes instrumentizing, login to the GENI Desktop and click on your slice there.
 [[BR]][[BR]]
@@ -49 +48 @@
 
 '''SSH:''' [[BR]]
-From the GENI Desktop you can SSH into your nodes. Click on the launch icon(which looks like a rocket ship) and select “SSH”. Then click on the node you want to SSH into and select “Open SSH”.[[BR]]
-[[Image(GENIDeskopSSH.png, 50%)]][[BR]]
-You may get a window saying that the site is untrusted. Continue and accept the security certificate. [[BR]][[Image(GENIDesktopUntrustedSSH.png, 50%)]]
-[[BR]][[Image(GENIDesktopSSHWindow.png, 80%)]][[BR]][[BR]]
+From the GENI Desktop you can SSH into your nodes. Click on the launch icon(which looks like a rocket ship) and select “SSH”. Then click on the node you want to SSH into and select “Open SSH”.[[BR]][[BR]]
+[[Image(GENIDeskopSSH.png, 40%)]][[BR]][[BR]][[BR]][[BR]]
+You may get a window saying that the site is untrusted. Continue and accept the security certificate. [[BR]][[BR]][[Image(GENIDesktopUntrustedSSH.png, 40%)]]
+[[BR]][[Image(GENIDesktopSSHWindow.png, 60%)]][[BR]][[BR]]
 
 
 '''Graphs''': [[BR]]
-To see graphs of the GENI Desktop, click on the launch icon(which looks like a rocket ship) and select “GEMINI Graphs”. 
-[[BR]][[Image(GENIDesktopLaunchGraphs.png, 20%)]][[BR]]
-Select the graphs you would like to appear and the nodes for which you would like to see graphs. Then press "Add Graphs" or "Add Graphs with Titles". You can click on these graphs to open them in a new window.
-[[BR]][[Image(GENIDesktopGraph.png, 80%)]][[BR]]
+To see graphs of the GENI Desktop, click on the launch icon(which looks like a rocket ship) and select “GEMINI Graphs”. [[BR]]
+[[BR]][[Image(GENIDesktopLaunchGraphs.png, 20%)]][[BR]][[BR]][[BR]][[BR]]
+Select the graphs you would like to appear and the nodes for which you would like to see graphs. Then press "Add Graphs" or "Add Graphs with Title". You can click on these graphs to open them in a new window.[[BR]]
+[[BR]][[Image(GENIDesktopGraph.png, 60%)]][[BR]][[BR]]
 
 
 '''Global Node:'''[[BR]]
-Access the global node by choosing GEMINI GN from the launch menu. From here you can choose “View Live Feed” which allows you to see all the tables and graphs stored within the global node and use tools such as Wireshark. 
-[[BR]][[Image(GENIDesktopLaunchGN.png, 70%)]][[BR]]
-Click on “Open PS Config” to open a window that allows you to view active measurements & create various tests to run on your slice.  
-[[BR]][[Image(GENIDesktopActiveMeasure.png, 70%)]][[BR]]
+Access the global node by choosing GEMINI GN from the launch menu. From here you can choose “View Live Feed” which allows you to see all the tables and graphs stored within the global node and use tools such as Wireshark. [[BR]]
+[[BR]][[Image(GENIDesktopLaunchGN.png, 55%)]][[BR]][[BR]][[BR]][[BR]]
+Click on “Open PS Config” to open a window that allows you to view active measurements & create various tests to run on your slice.  [[BR]]
+[[BR]][[Image(GENIDesktopActiveMeasure.png, 50%)]][[BR]]
 
 [[BR]][[BR]]
 
 == GIMI: == 
-Access !LabWiki at the following link: [http://labwiki.casa.umass.edu:4000/resource/login/openid.html]. Login to !LabWiki using your GENI Portal credentials. When prompted send your information to !LabWiki.[[BR]]
-[[Image(LabWiki.png, 40%)]] [[Image(LabWikiSendInfo.png, 50%)]][[BR]]
-Type “step” in the search bar below “Prepare”. It should give options. Select the script ending in “step1-ping_all.rb”. Make any necessary edit to the script so that your node name match(if you used the rspec above the node will already be named properly). Save any changes you made. Then click and drag the paper and pencil icon to the column titled “Execute”.
+Access !LabWiki at the following link: [http://labwiki.casa.umass.edu:4000/resource/login/openid.html]. Login to !LabWiki using your GENI Portal credentials. When prompted send your information to !LabWiki.[[BR]][[BR]]
+[[Image(LabWiki.png, 40%)]] [[Image(LabWikiSendInfo.png, 50%)]][[BR]][[BR]][[BR]][[BR]]
+
+Type “step” in the search bar below “Prepare”. It should give options. Select the script ending in “step1-ping_all.rb”. Make any necessary edit to the script so that your node name match(if you used the rspec above the node will already be named properly). Save any changes you made. Then click and drag the paper and pencil icon to the column titled “Execute”.[[BR]]
 [[BR]][[Image(LabwikiTypeStep.png, 50%)]] [[BR]]
 [[BR]][[Image(LabWikiStep1Save.png, 50%)]] [[BR]]