Version 6 (modified by 12 years ago) (diff) | ,
---|
Run an OMF Experiment on an InstaGENI Test Bed
This page provides steps to run an OMF-experiment on an InstaGENI testbed with two nodes.
You can use the GEC16-Tutorial VM to run the experiment as it has the OMF commands pre-installed on them.
1. Create a 2 node topology using the Rspec below.
Note: This rspec is for 2 nodes on the bbninstageni Aggregate manager
For other managers, you can use url=https://boss.instageni.gpolab.bbn.com/image_metadata.php?uuid=2a721653-a868-11e2-921f-029e26f15299
For the same manager, you can use id=urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-net:GIMIomf (given below)
<rspec type="request" generated_by="Flack" generated="2013-05-08T15:51:25Z" xsi:schemaLocation="http://www.geni.net/resources/rspec/3 http://www.geni.net/resources/rspec/3/request.xsd " xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:client="http://www.protogeni.net/resources/rspec/ext/client/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.geni.net/resources/rspec/3"> <node client_id="nodeA" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="false" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"> <rs:vnode name="pcvm2-2"/> <sliver_type name="emulab-openvz"> <disk_image name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-net//GIMIomf"/> </sliver_type> <services> <execute command="sudo sh local/postboot_script.sh" shell="sh"/> <install install_path="/local" url="http://emmy9.casa.umass.edu/InstaGENI_Images/install-script.tar.gz"/> </services> <interface client_id="VM:if0"> <ip address="10.10.1.1" netmask="" type="ipv4"/> <flack:interface_info addressBound="false" bound="false"/> </interface> <flack:node_info x="152" y="74" unbound="true"/> </node> <node client_id="nodeB" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="false" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"> <rs:vnode name="pcvm2-5"/> <sliver_type name="emulab-openvz"> <disk_image name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-net//GIMIomf"/> </sliver_type> <services> <execute command="sudo sh /local/postboot_script.sh" shell="sh"/> <install install_path="/local" url="http://emmy9.casa.umass.edu/InstaGENI_Images/install-script.tar.gz"/> </services> <interface client_id="VM-0:if0"> <ip address="10.10.1.2" netmask="" type="ipv4"/> <flack:interface_info addressBound="false" bound="false"/> </interface> <flack:node_info x="450" y="104" unbound="true"/> </node> <link client_id="lan0"> <flack:link_info x="-1" y="-1" unboundVlantag="true" xmlns="http://www.protogeni.net/resources/rspec/ext/flack/1"/> <component_manager name="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm"/> <interface_ref client_id="VM:if0"/> <interface_ref client_id="VM-0:if0"/> <property source_id="VM:if0" dest_id="VM-0:if0"/> <property source_id="VM-0:if0" dest_id="VM:if0"/> <link_type name="lan"/> <flack:link_info x="-1" y="-1" unboundVlantag="true"/> </link> </rspec>
2. Edit Experiment Script.
# # Copyright (c) 2012 National ICT Australia (NICTA), Australia # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN # THE SOFTWARE. # defApplication('oml:app:ping', 'ping') do |a| a.version(2, 9, 0) a.shortDescription = "Wrapper around ping" a.description = "This application runs the system ping, parses its output and reports the measurements via OML" a.path = "/root/ping-oml2" a.defProperty('dest_addr', 'Address to ping', 'a', {:type => :string, :dynamic => false}) a.defProperty('count', 'Number of times to ping', 'c', {:type => :integer, :dynamic => false}) a.defProperty('interval', 'Interval between pings in s', 'i', {:type => :integer, :dynamic => false}) a.defProperty('quiet', 'Don\'t show ping output on the console', 'q', {:type => :boolean, :dynamic => false}) a.defProperty('inet6', 'Use ping6 rather than ping', '6', {:type => :boolean, :dynamic => false}) a.defMeasurement('ping') do |m| m.defMetric('dest_addr',:string) m.defMetric('ttl',:int) m.defMetric('rtt',:float) m.defMetric('rtt_unit',:string) end a.defMeasurement('summary') do |m| m.defMetric('ntransmitted',:int) m.defMetric('nreceived',:int) m.defMetric('lossratio',:float) m.defMetric('runtime',:float) m.defMetric('runtime_unit',:string) end a.defMeasurement('rtt_stats') do |m| m.defMetric('min',:float) m.defMetric('avg',:float) m.defMetric('max',:float) m.defMetric('mdev',:float) m.defMetric('rtt_unit',:string) end end #Example use with OMF: #dbhatabc is the hostname of my source node #dbhatxyz is the hostname of my sink node defProperty('source', "dbhatabc", "ID of a resource") defProperty('sink', "dbhatxyz", "ID of a resource") defProperty('sinkaddr', "10.10.1.2", "Ping destination address") defGroup('Source', property.source) do |node| node.addApplication("oml:app:ping") do |app| app.setProperty('dest_addr', property.sinkaddr) app.setProperty('count', 5) app.setProperty('interval', 1) app.measure('ping', :samples => 1) end end defGroup('Sink', property.sink) do |node| end onEvent(:ALL_UP_AND_INSTALLED) do |event| info "Starting the ping" group('Source').startApplications wait 6 info "Stopping the ping" group('Source').stopApplications Experiment.done end
http://groups.geni.net/geni/wiki/IMInteroperability/GIMIInstaGENITestCase/GIMI_Simple_Experiment.rb GIMI Simple Experiment script is shown above. In the experiment script you would need to change the host names to the names of your nodes.
3. Run the experiment using the following command
omf-5.4 exec --no-am -e <exp_name> -S <slice_name> GIMI_Simple_Experiment.rb
The exp_name can be anything you wish to call your experiment. Preferably you could have your exp_name as slicename+exp_name. e.g. dbhatomf_ping_all
The slice_name has to be the slice_name on which you wish to run the experiment.
Attached here is Experiment_run_log.txt contains my log after a successful run of the experiment script.
INFO NodeHandler: OMF Experiment Controller 5.4 (git c005675) INFO NodeHandler: Slice ID: dbhatomf INFO NodeHandler: Experiment ID: dbhatomf-ping INFO NodeHandler: Message authentication is disabled WARN NodeHandler: AM support disabled - any service calls will fail! INFO Experiment: load system:exp:stdlib INFO property.resetDelay: resetDelay = 210 (Fixnum) INFO property.resetTries: resetTries = 1 (Fixnum) INFO Experiment: load system:exp:eventlib INFO Experiment: load ping.rb INFO property.source: source = "dbhatabc" (String) INFO property.sink: sink = "dbhatxyz" (String) INFO property.sinkaddr: sinkaddr = "10.10.1.2" (String) INFO Topology: Loading topology 'dbhatabc'. INFO Topology: Loading topology 'dbhatxyz'. INFO Experiment: Switching ON resources which are OFF INFO ALL_UP_AND_INSTALLED: Event triggered. Starting the associated tasks. INFO exp: Starting the ping INFO exp: Request from Experiment Script: Wait for 6s.... INFO exp: Stopping the ping INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks. INFO NodeHandler: INFO NodeHandler: Shutting down experiment, please wait... INFO NodeHandler: INFO run: Experiment dbhatomf-ping finished after 0:16
Attachments (5)
- step1-ping_all.rb (2.4 KB) - added by 12 years ago.
- insta_topo.png (146.6 KB) - added by 12 years ago.
- insta_labwiki1.png (160.9 KB) - added by 12 years ago.
- insta_labwiki2.png (200.1 KB) - added by 12 years ago.
- dbhat5insta.rspec (8.7 KB) - added by 12 years ago.
Download all attachments as: .zip