Back to the [[wiki:IntegrationTemp GENI Integration Page]] [[PageOutline]] = Overview = The Washington D.C. I2 PoP contains an SPP, ProtoGENI, and MAX node. [[Image(I2WASHRACKS.jpg, width=250)]][[BR]] Photos of ProtoGENI/SPP/MAX deployment at I2 courtesy of Chris Tracy [[BR]][[BR]][[BR]] = ProtoGENI = [[PageOutline]] The hardware is arranged as follows: [[Image(protogeni-backbone-node.png,width=300)]] [[Image(protogeni-backbone-node2.png,width=300)]] == Reaching ProtoGENI == The ProtoGENI node at I2 WASH is connected to I2's Infinera via its !ProCurve 5406 switch. The same switch is also connected to I2's production IP/DCN network via I2's !ProCurve switch. IP addresses have been assigned out of prefix 64.57.23.160/28. The gateway is 64.57.23.161 (Juniper T640 router). === Technical Contacts === * Dan Reading (best to contact about PCs) dreading@flux.utah.edu * Rob Ricci (best to contact about switches) ricci@cs.utah.edu [[BR]] === IP addresses === ''The following addresses are only accessible to ProtoGENI administrators:'' || Device || DNS || Purpose || IP || || !ProCurve 5406 Switch || || Management || 64.57.23.168 || || ProtoGENI Node 1 || || Management || 64.57.23.162 || || ProtoGENI Node 1 || || Data || 64.57.23.165 || || ProtoGENI Node 2 || || Management || 64.57.23.163 || || ProtoGENI Node 2 || || Data || 64.57.23.166 || === VLAN IDs === || Device || Port || Purpose || VLAN ID || || !ProCurve 5406 || A17 || Test Network with SPP || 3001 || || !ProCurve 5406 || A18 || Test Network with SPP || 3001 || || !ProCurve 5406 || A19 || Test Network with SPP || 3002 || || !ProCurve 5406 || A20 || Test Network with SPP || 3002 || || !ProCurve 5406 || A21 || Test Network with SPP || 3003 || || !ProCurve 5406 || A22 || Test Network with SPP || 3003 || [[BR]][[BR]] == Equipment == === HP !ProCurve 5406 switch === [[Image(ProtoGENI-ProCurve-front.jpg,width=250,align=right)]] || Port || Destination Device || Dst. Port || || B1 || Infinera || fpc1 13Tx,1 || || B3 || empty || || || D1 || MAX || SM SC-SC Cable || || A1 || I2 HP !RackLan || C15 || || A2 || I2 HP !RackLan || C16 || || A3 || ProtoGENI Dell 1 || mnmgt || || A4 || ProtoGENI Dell 1 || i1 || || A5 || ProtoGENI Dell 1 || i2 || || A6 || ProtoGENI Dell 1 || netfpga1p0 || || A7 || ProtoGENI Dell 1 || netfpga1p1 || || A8 || ProtoGENI Dell 1 || netfpga2p0 || || A9 || ProtoGENI Dell 1 || netfpga2p1 || || A10 || ProtoGENI Dell 2 || mnmgt || || A11 || ProtoGENI Dell 2 || i1 || || A12 || ProtoGENI Dell 2 || i2 || || A13 || ProtoGENI Dell 2 || netfpga1p0 || || A14 || ProtoGENI Dell 2 || netfpga1p1 || || A15 || ProtoGENI Dell 2 || netfpga2p0 || || A16 || ProtoGENI Dell 2 || netfpga2p1 || || A17-A22 || SPP ATCA || 1-6 || === Dell 2950 ProtoGENI node 1 === [[Image(ProtoGENI-Dells-front.jpg,width=250,align=right)]] || Port || Destination Device || Dst. Port || || B1 || I2 HP 5406 || C17 || || mnmgt || ProtoGENI !ProCurve || A3 || || i1 || ProtoGENI !ProCurve || A4 || || i2 || ProtoGENI !ProCurve || A5 || || netfpga1p0 || ProtoGENI !ProCurve || A6 || || netfpga1p1 || ProtoGENI !ProCurve || A7 || || netfpga2p0 || ProtoGENI !ProCurve || A8 || || netfpga2p1 || ProtoGENI !ProCurve || A9 || === Dell 2950 ProtoGENI node 2 === [[Image(ProtoGENI-Dells-back.jpg,width=300,align=right)]] || Port || Destination Device || Dst. Port || || B2 || I2 HP 5406 || C18 || || mnmgt || ProtoGENI !ProCurve || A10 || || i1 || ProtoGENI !ProCurve || A11 || || i2 || ProtoGENI !ProCurve || A12 || || netfpga1p0 || ProtoGENI !ProCurve || A13 || || netfpga1p1 || ProtoGENI !ProCurve || A14 || || netfpga2p0 || ProtoGENI !ProCurve || A15 || || netfpga2p1 || ProtoGENI !ProCurve || A16 || [[BR]][[BR]][[BR]] = SPP = [[PageOutline]] == Reaching SPP == The SPP node at I2 WASH is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch. SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch. IP addresses have been assigned out of prefix 64.57.23.160/28. The gateway is 64.57.23.161 (Juniper T640 router). === Technical Contacts === * John !DeHart (best to contact first) jdd@arl.wustl.edu * David Zar dzar@wustl.edu [[BR]] === IP Addresses === ''The following addresses are only available to SPP administrators:'' || Device || DNS || Purpose || IP || || R200 Control Processor || || || 64.57.23.167 || === VLAN IDs === || Device || Port || Purpose || VLAN ID || || Radisys 7010 || 1 || Test Network with ProtoGENI || 3001 || || Radisys 7010 || 2 || Test Network with ProtoGENI || 3001 || || Radisys 7010 || 3 || Test Network with ProtoGENI || 3002 || || Radisys 7010 || 4 || Test Network with ProtoGENI || 3002 || || Radisys 7010 || 5 || Test Network with ProtoGENI || 3003 || || Radisys 7010 || 6 || Test Network with ProtoGENI || 3003 || [[BR]][[BR]] == Equipment == === Dell R200 Control Processor === [[Image(spp-dell-front.jpg,width=300,align=right)]] || Port || Destination Device || Dst. Port || || A || GPE2 || A || || B || GPE1 || B || || C || Netgear Console || || D || ATCA || D || || E || Radisys ATCA 2210 || E || === Netgear Prosafe switch (GSM7328S) === [[Image(spp-netgear-front.jpg,width=300,align=right)]] || Port || Destination Device || Dst. Port || || Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 || || Console || Control Processor || C || || 1 || Control Processor || NetFPGA 0 || || 2 || Control Processor || NetFPGA 1 || || 3 || Control Processor || NetFPGA 2 || || 4 || Control Processor || NetFPGA 3 || === ATCA Chassis === [[Image(SPP-Backbone-Node.jpg,width=250,align=right)]] ==== Slot 6 - Radisys ATCA 7010 (LC) ==== || Port || Destination Device || Dst. Port || || 1 (back) || ProtoGENI !ProCurve || A17 || || 2 (back) || ProtoGENI !ProCurve || A18 || || 3 (back) || ProtoGENI !ProCurve || A19 || || 4 (back) || ProtoGENI !ProCurve || A20 || || 5 (back) || ProtoGENI !ProCurve || A21 || || 6 (back) || ProtoGENI !ProCurve || A22 || || 8 (back) || I2 !ProCurve || 8 || || 9 (back) || I2 !ProCurve || 9 || || 10 (back) || I2 !ProCurve || 10 || || NPU-B || Radisys 2210 || SFP 1/7 || ==== Slot 5 - Radisys ATCA 7010 (NPE) ==== [[Image(spp-node-front.jpg,width=200,align=right)]] [[Image(spp-node-back.jpg,width=200,align=right)]] || Port || Destination Device || Dst. Port || || NPU-B || Radisys 2210 || SFP 1/8 || ==== Slot 4 - GPE2 ==== || Port || Destination Device || Dst. Port || || A || Control Processor || A || ==== Slot 3 - GPE1 ==== || Port || Destination Device || Dst. Port || || B || Control Processor || B || ==== Slot 2 - Empty ==== ==== Slot 1 - Radisys ATCA 2210 ==== || Port || Destination Device || Dst. Port || || SFP 3/1 (back) || Control Processor || 1 || || XFP 1/4 || Netgear switch mm lc-lc || module 1 || || SFP 1/6 || Processor || 2 || || SFP 1/7 || LC || NPU-B || || SFP 1/8 || NPE || NPU-B || || E || Control Processor || E || [[BR]][[BR]][[BR]] = MAX = [[PageOutline]] == Reaching MAX == [[BR]][[BR]] == Equipment == A typical MAX node (from MAX's GENI wiki):[[BR]] [[Image(typical-dragon-node-diagram.png,width=300)]] [[Image(typical-dragon-node-equipment.png,width=300)]] MAX is connected to ProtoGENI as shown in the following diagram (thanks to Chris Tracy for the diagram):[[BR]] [[Image(MAX2ProtoATWash.jpg,width=300)]] [[BR]][[BR]] == Technical Contacts == [[BR]][[BR]][[BR]]