| 1 | Back to the [[wiki:IntegrationTemp GENI Integration Page]] |
| 2 | [[PageOutline]] |
| 3 | |
| 4 | = Overview = |
| 5 | The Washington D.C. I2 PoP contains an SPP, ProtoGENI, and MAX node. |
| 6 | |
| 7 | |
| 8 | |
| 9 | |
| 10 | [[Image(I2WASHRACKS.jpg, width=250)]][[BR]] |
| 11 | Photos of ProtoGENI/SPP/MAX deployment at I2 courtesy of Chris Tracy |
| 12 | |
| 13 | [[BR]][[BR]][[BR]] |
| 14 | |
| 15 | |
| 16 | = ProtoGENI = |
| 17 | [[PageOutline]] |
| 18 | |
| 19 | |
| 20 | The hardware is arranged as follows: |
| 21 | |
| 22 | [[Image(protogeni-backbone-node.png,width=300)]] |
| 23 | |
| 24 | [[Image(protogeni-backbone-node2.png,width=300)]] |
| 25 | |
| 26 | == Reaching ProtoGENI == |
| 27 | The ProtoGENI node at I2 WASH is connected to I2's Infinera via its !ProCurve 5406 switch. The same switch is also connected to I2's production IP/DCN network via I2's !ProCurve switch. |
| 28 | |
| 29 | IP addresses have been assigned out of prefix 64.57.23.160/28. The gateway is 64.57.23.161 (Juniper T640 router). |
| 30 | |
| 31 | === Technical Contacts === |
| 32 | * Dan Reading (best to contact about PCs) dreading@flux.utah.edu |
| 33 | * Rob Ricci (best to contact about switches) ricci@cs.utah.edu |
| 34 | |
| 35 | [[BR]] |
| 36 | |
| 37 | === IP addresses === |
| 38 | |
| 39 | ''The following addresses are only accessible to ProtoGENI administrators:'' |
| 40 | |
| 41 | || Device || DNS || Purpose || IP || |
| 42 | || !ProCurve 5406 Switch || || Management || 64.57.23.168 || |
| 43 | || ProtoGENI Node 1 || || Management || 64.57.23.162 || |
| 44 | || ProtoGENI Node 1 || || Data || 64.57.23.165 || |
| 45 | || ProtoGENI Node 2 || || Management || 64.57.23.163 || |
| 46 | || ProtoGENI Node 2 || || Data || 64.57.23.166 || |
| 47 | |
| 48 | |
| 49 | === VLAN IDs === |
| 50 | |
| 51 | || Device || Port || Purpose || VLAN ID || |
| 52 | || !ProCurve 5406 || A17 || Test Network with SPP || 3001 || |
| 53 | || !ProCurve 5406 || A18 || Test Network with SPP || 3001 || |
| 54 | || !ProCurve 5406 || A19 || Test Network with SPP || 3002 || |
| 55 | || !ProCurve 5406 || A20 || Test Network with SPP || 3002 || |
| 56 | || !ProCurve 5406 || A21 || Test Network with SPP || 3003 || |
| 57 | || !ProCurve 5406 || A22 || Test Network with SPP || 3003 || |
| 58 | |
| 59 | [[BR]][[BR]] |
| 60 | == Equipment == |
| 61 | === HP !ProCurve 5406 switch === |
| 62 | [[Image(ProtoGENI-ProCurve-front.jpg,width=250,align=right)]] |
| 63 | |
| 64 | || Port || Destination Device || Dst. Port || |
| 65 | || B1 || Infinera || fpc1 13Tx,1 || |
| 66 | || B3 || empty || || |
| 67 | || D1 || MAX || SM SC-SC Cable || |
| 68 | || A1 || I2 HP !RackLan || C15 || |
| 69 | || A2 || I2 HP !RackLan || C16 || |
| 70 | || A3 || ProtoGENI Dell 1 || mnmgt || |
| 71 | || A4 || ProtoGENI Dell 1 || i1 || |
| 72 | || A5 || ProtoGENI Dell 1 || i2 || |
| 73 | || A6 || ProtoGENI Dell 1 || netfpga1p0 || |
| 74 | || A7 || ProtoGENI Dell 1 || netfpga1p1 || |
| 75 | || A8 || ProtoGENI Dell 1 || netfpga2p0 || |
| 76 | || A9 || ProtoGENI Dell 1 || netfpga2p1 || |
| 77 | || A10 || ProtoGENI Dell 2 || mnmgt || |
| 78 | || A11 || ProtoGENI Dell 2 || i1 || |
| 79 | || A12 || ProtoGENI Dell 2 || i2 || |
| 80 | || A13 || ProtoGENI Dell 2 || netfpga1p0 || |
| 81 | || A14 || ProtoGENI Dell 2 || netfpga1p1 || |
| 82 | || A15 || ProtoGENI Dell 2 || netfpga2p0 || |
| 83 | || A16 || ProtoGENI Dell 2 || netfpga2p1 || |
| 84 | || A17-A22 || SPP ATCA || 1-6 || |
| 85 | |
| 86 | === Dell 2950 ProtoGENI node 1 === |
| 87 | [[Image(ProtoGENI-Dells-front.jpg,width=250,align=right)]] |
| 88 | |
| 89 | || Port || Destination Device || Dst. Port || |
| 90 | || B1 || I2 HP 5406 || C17 || |
| 91 | || mnmgt || ProtoGENI !ProCurve || A3 || |
| 92 | || i1 || ProtoGENI !ProCurve || A4 || |
| 93 | || i2 || ProtoGENI !ProCurve || A5 || |
| 94 | || netfpga1p0 || ProtoGENI !ProCurve || A6 || |
| 95 | || netfpga1p1 || ProtoGENI !ProCurve || A7 || |
| 96 | || netfpga2p0 || ProtoGENI !ProCurve || A8 || |
| 97 | || netfpga2p1 || ProtoGENI !ProCurve || A9 || |
| 98 | |
| 99 | |
| 100 | === Dell 2950 ProtoGENI node 2 === |
| 101 | [[Image(ProtoGENI-Dells-back.jpg,width=300,align=right)]] |
| 102 | |
| 103 | || Port || Destination Device || Dst. Port || |
| 104 | || B2 || I2 HP 5406 || C18 || |
| 105 | || mnmgt || ProtoGENI !ProCurve || A10 || |
| 106 | || i1 || ProtoGENI !ProCurve || A11 || |
| 107 | || i2 || ProtoGENI !ProCurve || A12 || |
| 108 | || netfpga1p0 || ProtoGENI !ProCurve || A13 || |
| 109 | || netfpga1p1 || ProtoGENI !ProCurve || A14 || |
| 110 | || netfpga2p0 || ProtoGENI !ProCurve || A15 || |
| 111 | || netfpga2p1 || ProtoGENI !ProCurve || A16 || |
| 112 | |
| 113 | |
| 114 | |
| 115 | [[BR]][[BR]][[BR]] |
| 116 | |
| 117 | |
| 118 | |
| 119 | |
| 120 | |
| 121 | |
| 122 | |
| 123 | |
| 124 | |
| 125 | |
| 126 | |
| 127 | = SPP = |
| 128 | [[PageOutline]] |
| 129 | |
| 130 | == Reaching SPP == |
| 131 | The SPP node at I2 WASH is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch. SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch. |
| 132 | |
| 133 | IP addresses have been assigned out of prefix 64.57.23.160/28. The gateway is 64.57.23.161 (Juniper T640 router). |
| 134 | |
| 135 | |
| 136 | === Technical Contacts === |
| 137 | * John !DeHart (best to contact first) jdd@arl.wustl.edu |
| 138 | * David Zar dzar@wustl.edu |
| 139 | [[BR]] |
| 140 | |
| 141 | === IP Addresses === |
| 142 | |
| 143 | ''The following addresses are only available to SPP administrators:'' |
| 144 | |
| 145 | || Device || DNS || Purpose || IP || |
| 146 | || R200 Control Processor || || || 64.57.23.167 || |
| 147 | |
| 148 | |
| 149 | |
| 150 | |
| 151 | === VLAN IDs === |
| 152 | |
| 153 | || Device || Port || Purpose || VLAN ID || |
| 154 | || Radisys 7010 || 1 || Test Network with ProtoGENI || 3001 || |
| 155 | || Radisys 7010 || 2 || Test Network with ProtoGENI || 3001 || |
| 156 | || Radisys 7010 || 3 || Test Network with ProtoGENI || 3002 || |
| 157 | || Radisys 7010 || 4 || Test Network with ProtoGENI || 3002 || |
| 158 | || Radisys 7010 || 5 || Test Network with ProtoGENI || 3003 || |
| 159 | || Radisys 7010 || 6 || Test Network with ProtoGENI || 3003 || |
| 160 | [[BR]][[BR]] |
| 161 | == Equipment == |
| 162 | |
| 163 | === Dell R200 Control Processor === |
| 164 | [[Image(spp-dell-front.jpg,width=300,align=right)]] |
| 165 | |
| 166 | || Port || Destination Device || Dst. Port || |
| 167 | || A || GPE2 || A || |
| 168 | || B || GPE1 || B || |
| 169 | || C || Netgear Console || |
| 170 | || D || ATCA || D || |
| 171 | || E || Radisys ATCA 2210 || E || |
| 172 | |
| 173 | === Netgear Prosafe switch (GSM7328S) === |
| 174 | [[Image(spp-netgear-front.jpg,width=300,align=right)]] |
| 175 | |
| 176 | || Port || Destination Device || Dst. Port || |
| 177 | || Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 || |
| 178 | || Console || Control Processor || C || |
| 179 | || 1 || Control Processor || NetFPGA 0 || |
| 180 | || 2 || Control Processor || NetFPGA 1 || |
| 181 | || 3 || Control Processor || NetFPGA 2 || |
| 182 | || 4 || Control Processor || NetFPGA 3 || |
| 183 | |
| 184 | |
| 185 | === ATCA Chassis === |
| 186 | [[Image(SPP-Backbone-Node.jpg,width=250,align=right)]] |
| 187 | |
| 188 | ==== Slot 6 - Radisys ATCA 7010 (LC) ==== |
| 189 | || Port || Destination Device || Dst. Port || |
| 190 | || 1 (back) || ProtoGENI !ProCurve || A17 || |
| 191 | || 2 (back) || ProtoGENI !ProCurve || A18 || |
| 192 | || 3 (back) || ProtoGENI !ProCurve || A19 || |
| 193 | || 4 (back) || ProtoGENI !ProCurve || A20 || |
| 194 | || 5 (back) || ProtoGENI !ProCurve || A21 || |
| 195 | || 6 (back) || ProtoGENI !ProCurve || A22 || |
| 196 | || 8 (back) || I2 !ProCurve || 8 || |
| 197 | || 9 (back) || I2 !ProCurve || 9 || |
| 198 | || 10 (back) || I2 !ProCurve || 10 || |
| 199 | || NPU-B || Radisys 2210 || SFP 1/7 || |
| 200 | |
| 201 | ==== Slot 5 - Radisys ATCA 7010 (NPE) ==== |
| 202 | [[Image(spp-node-front.jpg,width=200,align=right)]] [[Image(spp-node-back.jpg,width=200,align=right)]] |
| 203 | || Port || Destination Device || Dst. Port || |
| 204 | || NPU-B || Radisys 2210 || SFP 1/8 || |
| 205 | |
| 206 | ==== Slot 4 - GPE2 ==== |
| 207 | || Port || Destination Device || Dst. Port || |
| 208 | || A || Control Processor || A || |
| 209 | |
| 210 | |
| 211 | ==== Slot 3 - GPE1 ==== |
| 212 | || Port || Destination Device || Dst. Port || |
| 213 | || B || Control Processor || B || |
| 214 | |
| 215 | ==== Slot 2 - Empty ==== |
| 216 | |
| 217 | ==== Slot 1 - Radisys ATCA 2210 ==== |
| 218 | || Port || Destination Device || Dst. Port || |
| 219 | || SFP 3/1 (back) || Control Processor || 1 || |
| 220 | || XFP 1/4 || Netgear switch mm lc-lc || module 1 || |
| 221 | || SFP 1/6 || Processor || 2 || |
| 222 | || SFP 1/7 || LC || NPU-B || |
| 223 | || SFP 1/8 || NPE || NPU-B || |
| 224 | || E || Control Processor || E || |
| 225 | |
| 226 | |
| 227 | [[BR]][[BR]][[BR]] |
| 228 | |
| 229 | = MAX = |
| 230 | [[PageOutline]] |
| 231 | |
| 232 | == Reaching MAX == |
| 233 | [[BR]][[BR]] |
| 234 | == Equipment == |
| 235 | A typical MAX node (from MAX's GENI wiki):[[BR]] |
| 236 | [[Image(typical-dragon-node-diagram.png,width=300)]] [[Image(typical-dragon-node-equipment.png,width=300)]] |
| 237 | |
| 238 | MAX is connected to ProtoGENI as shown in the following diagram (thanks to Chris Tracy for the diagram):[[BR]] |
| 239 | [[Image(MAX2ProtoATWash.jpg,width=300)]] |
| 240 | [[BR]][[BR]] |
| 241 | == Technical Contacts == |
| 242 | |
| 243 | |
| 244 | |
| 245 | [[BR]][[BR]][[BR]] |
| 246 | |
| 247 | |