Back to the Integration GENI Integration Page?

Overview

The Washington D.C. I2 PoP contains an SPP, ProtoGENI, and MAX node.

Photos of ProtoGENI/SPP/MAX deployment at I2 courtesy of Chris Tracy

ProtoGENI

The hardware is arranged as follows:

Reaching ProtoGENI

The ProtoGENI node at I2 WASH is connected to I2's Infinera via its ProCurve 5406 switch. The same switch is also connected to I2's production IP/DCN network via I2's ProCurve switch.

IP addresses have been assigned out of prefix 64.57.23.160/28.

Technical Contacts

• Dan Reading (best to contact about PCs) ​dreading@flux.utah.edu
• Rob Ricci (best to contact about switches) ​ricci@cs.utah.edu

IP addresses

The following addresses are only accessible to ProtoGENI administrators:

Device	DNS	Purpose	IP
I2 Juniper T640 Router		Gateway	64.57.23.161
ProCurve 5406 Switch		Management	64.57.23.168
ProtoGENI Node 1		Management	64.57.23.162
ProtoGENI Node 1		Data	64.57.23.165
ProtoGENI Node 2		Management	64.57.23.163
ProtoGENI Node 2		Data	64.57.23.166

VLAN IDs

Device	Port	Purpose	VLAN ID
ProCurve 5406	A17	Test Network with SPP	3001
ProCurve 5406	A18	Test Network with SPP	3001
ProCurve 5406	A19	Test Network with SPP	3002
ProCurve 5406	A20	Test Network with SPP	3002
ProCurve 5406	A21	Test Network with SPP	3003
ProCurve 5406	A22	Test Network with SPP	3003

Equipment

HP ProCurve 5406 switch

• ProtoGENI/Emulab short name: procurve-pgeni-wash
• ProtoGENI URN: urn:publicid:IDN+emulab.net+node+procurve-pgeni-wash
• ProtoGENI (Aggregate) Component Manager URN: urn:publicid:IDN+emulab.net+authority+cm

Port	Destination Device	Dst. Port
B1	plugged in but unsed Infinera	fpc1 13Tx,1
B3	10GB LR optics - planned future expansion to Atlanta POP
D1	MAX	SM SC-SC Cable
D3	empty - could be populated, 10GB optics must be purchased
A1	I2 HP RackLan	C15
A2	I2 HP RackLan	C16
A3	ProtoGENI Dell 1	mnmgt
A4	ProtoGENI Dell 1	i1
A5	ProtoGENI Dell 1	i2
A6	ProtoGENI Dell 1	netfpga1p0
A7	ProtoGENI Dell 1	netfpga1p1
A8	ProtoGENI Dell 1	netfpga2p0
A9	ProtoGENI Dell 1	netfpga2p1
A10	ProtoGENI Dell 2	mnmgt
A11	ProtoGENI Dell 2	i1
A12	ProtoGENI Dell 2	i2
A13	ProtoGENI Dell 2	netfpga1p0
A14	ProtoGENI Dell 2	netfpga1p1
A15	SPP ACTA	5
A16	SPP ACTA	6
A17-A20	SPP ATCA	1-4
A21	empty
A22	MX960	ge-9/1/2 (to SALT POP)
A23	MX960	ge-9/1/1 (to KANS POP)
A24	MX960	ge-9/1/3 (to Internet2 ION)
Slot C	empty
Slot E	empty
Slot F	empty

Dell 2950 ProtoGENI node 1

• ProtoGENI/Emulab short name: pg40
• ProtoGENI URN: urn:publicid:IDN+emulab.net+node+pg40
• Emulab hostname: pg40.emulab.net
• Routable IP interface: 64.57.23.165
• ProtoGENI (Aggregate) Component Manager URN: urn:publicid:IDN+emulab.net+authority+cm

Port	Destination Device	Dst. Port
B1	I2 HP 5406	C17
mnmgt	ProtoGENI ProCurve	A3
i1	ProtoGENI ProCurve	A4
i2	ProtoGENI ProCurve	A5
netfpga1p0	ProtoGENI ProCurve	A6
netfpga1p1	ProtoGENI ProCurve	A7
netfpga2p0	ProtoGENI ProCurve	A8
netfpga2p1	ProtoGENI ProCurve	A9

Dell 2950 ProtoGENI node 2

• ProtoGENI/Emulab short name: pg41
• ProtoGENI URN: urn:publicid:IDN+emulab.net+node+pg41
• Emulab hostname: pg41.emulab.net
• Routable IP interface: 64.57.23.166
• ProtoGENI (Aggregate) Component Manager URN: urn:publicid:IDN+emulab.net+authority+cm

Port	Destination Device	Dst. Port
B2	I2 HP 5406	C18
mnmgt	ProtoGENI ProCurve	A10
i1	ProtoGENI ProCurve	A11
i2	ProtoGENI ProCurve	A12
netfpga1p0	ProtoGENI ProCurve	A13
netfpga1p1	ProtoGENI ProCurve	A14
netfpga2p0	ProtoGENI ProCurve	A15
netfpga2p1	ProtoGENI ProCurve	A16

SPP

Reaching SPP

The SPP node at I2 WASH is connected to I2's Infinera via ProtoGENI's ProCurve 5406 switch. SPP is also connected to I2's production IP/DCN network via I2's ProCurve switch.

IP addresses have been assigned out of prefix 64.57.23.160/28.

Technical Contacts

• John DeHart (best to contact first) ​jdd@arl.wustl.edu
• David Zar ​dzar@wustl.edu

IP Addresses

The following addresses are only available to SPP administrators:

Device	DNS	Purpose	IP
I2 Juniper T640 Router		Gateway	64.57.23.161
R200 Control Processor			64.57.23.167

VLAN IDs

VLAN ID	Name	Device	Port	Description
3003	SPP-KANS-WASH-1	Radisys 7010	1	Connects KANS to WASH (kans:C16, kans:B3, wash:B1, wash:A17)
3004	SPP-KANS-WASH-2	Radisys 7010	2	Connects KANS to WASH (kans:C17, kans:B3, wash:B1, wash:A18)
3005	SPP-SALT-WASH-1	Radisys 7010	3	Connects SALT to WASH through KANS (salt:C14, salt:B1, wash:A19, wash:B1, kans:B1, kans:B3)
3006	SPP-SALT-WASH-2	Radisys 7010	4	Connects SALT to WASH through KANS (salt:C15, salt:B1, wash:A20, wash:B1, kans:B1, kans:B3)

Equipment

Dell R200 Control Processor

Port	Destination Device	Dst. Port
A	GPE2	A
B	GPE1	B
C	Netgear Console
D	ATCA	D
E	Radisys ATCA 2210	E

Netgear Prosafe switch (GSM7328S)

Port	Destination Device	Dst. Port
Module 1	ATCA 2210 (Slot 1)	XFP 1/4
Console	Control Processor	C
1	Control Processor	NetFPGA 0
2	Control Processor	NetFPGA 1
3	Control Processor	NetFPGA 2
4	Control Processor	NetFPGA 3

ATCA Chassis

Slot 6 - Radisys ATCA 7010 (LC)

Port	Destination Device	Dst. Port
1 (back)	ProtoGENI ProCurve	A17
2 (back)	ProtoGENI ProCurve	A18
3 (back)	ProtoGENI ProCurve	A19
4 (back)	ProtoGENI ProCurve	A20
5 (back)	ProtoGENI ProCurve	A21
6 (back)	ProtoGENI ProCurve	A22
8 (back)	I2 ProCurve	8
9 (back)	I2 ProCurve	9
10 (back)	I2 ProCurve	10
NPU-B	Radisys 2210	SFP 1/7

Slot 5 - Radisys ATCA 7010 (NPE)

Port	Destination Device	Dst. Port
NPU-B	Radisys 2210	SFP 1/8

Slot 4 - GPE2

Port	Destination Device	Dst. Port
A	Control Processor	A

Slot 3 - GPE1

Port	Destination Device	Dst. Port
B	Control Processor	B

Slot 2 - Empty

Slot 1 - Radisys ATCA 2210

Port	Destination Device	Dst. Port
SFP 3/1 (back)	Control Processor	1
XFP 1/4	Netgear switch mm lc-lc	module 1
SFP 1/6	Processor	2
SFP 1/7	LC	NPU-B
SFP 1/8	NPE	NPU-B
E	Control Processor	E

MAX

Reaching MAX

Equipment

A typical MAX node (from MAX's GENI wiki):

MAX is connected to ProtoGENI as shown in the following diagram (thanks to Chris Tracy for the diagram):

Technical Contacts