wiki:I2PoPSALT

Version 17 (modified by ricci@cs.utah.edu, 14 years ago) (diff)

--

Back to the Integration GENI Integration Page?

  1. Overview
  2. ProtoGENI
    1. Reaching ProtoGENI
      1. Technical Contacts
      2. IP addresses
      3. VLAN IDs
    2. Equipment
      1. HP ProCurve 5406 switch
      2. Dell 2950 ProtoGENI node 1
      3. Dell 2950 ProtoGENI node 2
  3. SPP
    1. Reaching SPP
      1. Technical Contacts
      2. IP Addresses
      3. VLAN IDs
    2. Equipment
      1. Dell R200 Control Processor
      2. Netgear Prosafe switch (GSM7328S)
      3. ATCA Chassis
        1. Slot 6 - Radisys ATCA 7010 (LC)
        2. Slot 5 - Radisys ATCA 7010 (NPE)
        3. Slot 4 - GPE2
        4. Slot 3 - GPE1
        5. Slot 2 - Empty
        6. Slot 1 - Radisys ATCA 2210

Overview

The SALT I2 PoP contains an SPP and ProtoGENI node.




ProtoGENI

The hardware is arranged as follows:

Backbone ProtoGENI node (courtesy of ProtoGENI backbone node wiki) Backbone ProtoGENI node (courtesy of ProtoGENI backbone node wiki)

Reaching ProtoGENI

The ProtoGENI node at I2 SALT is connected to I2's Infinera via its ProCurve 5406 switch. The same switch is also connected to I2's production IP/DCN network via I2's ProCurve switch.

The ProCurve switch also has a connection to the University of Utah campus, which runs to the Emulab machine room. This connection is made possible by Utah's regional network, UEN, and campus OIT.

This connection is currently implemented as follows:

  • Within the Internet2 suite in the SALT pop, a fiber is run from the procurve-pgeni-salt switch (port D3) to a distribution panel. This is a 10Gb port.
  • Level3 has run a cross-connect between the distribution panels in the Internet2 suite and the UEN suite, which is in the same building.
  • Within the UEN suite, a fiber patch connects the distribution panel to the UEN "summit" switch at 10Gbps
  • Packets from this cross-connect are carried up to campus on the 10Gbps connection used for all campus traffic. (In the future, we plan to carry this traffic on a dedicated 10Gb wave on a DWDM system.) "q-in-q" provider bridging is used to allow ProtoGENI to manage its own VLANs.
  • On campus, a fiber has been lit from the UEN switch in the EBC building to the MEB building (where the Emulab machine room is)
  • Within the Emulab machine room, the lit fiber lands on the switch cisco12

The connection looks like this:

Technical Contacts


IP addresses

IP addresses have been assigned out of prefix 64.57.23.144/28.

The following addresses are only accessible to ProtoGENI administrators:

Device DNS Purpose IP
I2 Juniper T640 Gateway 64.57.23.145
ProCurve 5406 Switch Management 64.57.23.152
ProtoGENI Node 1 Management 64.57.23.146
ProtoGENI Node 1 Data 64.57.23.149
ProtoGENI Node 2 Management 64.57.23.147
ProtoGENI Node 2 Data 64.57.23.150

VLAN IDs

Between the Utah campus and the SALT node, there is a single VLAN over UEN. Q-in-Q will be used to carry GENI VLANs through this connection.

Device Port Purpose VLAN ID
ProCurve 5406 C14 Test Network with SPP 3008
ProCurve 5406 C15 Test Network with SPP 3008
ProCurve 5406 C16 Test Network with SPP 3009
ProCurve 5406 C17 Test Network with SPP 3009
ProCurve 5406 C18 Test Network with SPP 3010
ProCurve 5406 C19 Test Network with SPP 3010
ProCurve 5406 C20 Test Network with SPP 3011



Equipment

HP ProCurve 5406 switch

  • ProtoGENI/Emulab short name: procurve-pgeni-salt
  • ProtoGENI URN: urn:publicid:IDN+emulab.net+node+procurve-pgeni-salt
  • ProtoGENI (Aggregate) Component Manager URN: urn:publicid:IDN+emulab.net+authority+cm
Port Destination Device Dst. Port
B1 Infinera ?
B3 10GB LR optics - planned future expansion to Seattle POP
D1 10GB LR optics - planned future expansion to Los Angeles POP
D3 10Gbps connection to Utah campus via UEN
A1 I2 HP RackLan (data) C12
A2 I2 HP RackLan (management) C13
A3 ProtoGENI Dell 1 mnmgt
A4 ProtoGENI Dell 1 Gb2
A5 ProtoGENI Dell 1 i1
A6 ProtoGENI Dell 1 i2
A7 ProtoGENI Dell 1 i3
A8 ProtoGENI Dell 1 i4
A9 ProtoGENI Dell 1 netfpga1p0
A10 ProtoGENI Dell 1 netfpga1p1
A11 ProtoGENI Dell 1 netfpga1p2
A12 ProtoGENI Dell 1 netfpga1p3
A13 ProtoGENI Dell 1 netfpga2p0
A14 ProtoGENI Dell 1 netfpga2p1
A15 ProtoGENI Dell 1 netfpga2p2
A16 ProtoGENI Dell 1 netfpga2p3
A17 ProtoGENI Dell 2 mnmgt
A18 ProtoGENI Dell 2 Gb2
A19 ProtoGENI Dell 2 i1
A20 ProtoGENI Dell 2 i2
A21 I2 DCN ?
A22-A24 empty - could be populated, 1GB optics must be purchased
C1 ProtoGENI Dell 2 i3
C2 ProtoGENI Dell 2 i4
C3 ProtoGENI Dell 2 netfpga1p0
C4 ProtoGENI Dell 2 netfpga1p1
C5 ProtoGENI Dell 2 netfpga1p2
C6 ProtoGENI Dell 2 netfpga1p3
C7 ProtoGENI Dell 2 netfpga2p0
C8 ProtoGENI Dell 2 netfpga2p1
C9 ProtoGENI Dell 2 netfpga2p2
C10 ProtoGENI Dell 2 netfpga2p3
C11 empty - 1GB copper available
C12 empty - 1GB copper available
C13 unused
C14-C20 SPP ATCA 1-7
C21-C24 empty - could be populated, 1GB optics must be purchased
Slot E empty
Slot F empty

Dell 2950 ProtoGENI node 1

  • ProtoGENI/Emulab short name: pg44
  • ProtoGENI URN: urn:publicid:IDN+emulab.net+node+pg44
  • Emulab hostname: pg44.emulab.net
  • Routable IP interface: 64.57.23.149
  • ProtoGENI (Aggregate) Component Manager URN: urn:publicid:IDN+emulab.net+authority+cm
Port Destination Device Dst. Port
Gb1 I2 HP 5406 C14
mnmgt ProtoGENI ProCurve A3
Gb2 ProtoGENI ProCurve A4
i1 ProtoGENI ProCurve A5
i2 ProtoGENI ProCurve A6
i3 ProtoGENI ProCurve A7
i4 ProtoGENI ProCurve A8
netfpga1p0 ProtoGENI ProCurve A9
netfpga1p1 ProtoGENI ProCurve A10
netfpga1p2 ProtoGENI ProCurve A11
netfpga1p3 ProtoGENI ProCurve A12
netfpga2p0 ProtoGENI ProCurve A13
netfpga2p1 ProtoGENI ProCurve A14
netfpga2p2 ProtoGENI ProCurve A15
netfpga2p3 ProtoGENI ProCurve A16

Dell 2950 ProtoGENI node 2

  • ProtoGENI/Emulab short name: pg45
  • ProtoGENI URN: urn:publicid:IDN+emulab.net+node+pg45
  • Emulab hostname: pg45.emulab.net
  • Routable IP interface: 64.57.23.150
  • ProtoGENI (Aggregate) Component Manager URN: urn:publicid:IDN+emulab.net+authority+cm
Port Destination Device Dst. Port
Gb1 I2 HP 5406 C15
mnmgt ProtoGENI ProCurve A17
Gb2 ProtoGENI ProCurve A18
i1 ProtoGENI ProCurve A19
i2 ProtoGENI ProCurve A20
i3 ProtoGENI ProCurve C1
i4 ProtoGENI ProCurve C2
netfpga1p0 ProtoGENI ProCurve C3
netfpga1p1 ProtoGENI ProCurve C4
netfpga1p2 ProtoGENI ProCurve C5
netfpga1p3 ProtoGENI ProCurve C6
netfpga2p0 ProtoGENI ProCurve C7
netfpga2p1 ProtoGENI ProCurve C8
netfpga2p2 ProtoGENI ProCurve C9
netfpga2p3 ProtoGENI ProCurve C10




SPP

  1. Overview
  2. ProtoGENI
    1. Reaching ProtoGENI
      1. Technical Contacts
      2. IP addresses
      3. VLAN IDs
    2. Equipment
      1. HP ProCurve 5406 switch
      2. Dell 2950 ProtoGENI node 1
      3. Dell 2950 ProtoGENI node 2
  3. SPP
    1. Reaching SPP
      1. Technical Contacts
      2. IP Addresses
      3. VLAN IDs
    2. Equipment
      1. Dell R200 Control Processor
      2. Netgear Prosafe switch (GSM7328S)
      3. ATCA Chassis
        1. Slot 6 - Radisys ATCA 7010 (LC)
        2. Slot 5 - Radisys ATCA 7010 (NPE)
        3. Slot 4 - GPE2
        4. Slot 3 - GPE1
        5. Slot 2 - Empty
        6. Slot 1 - Radisys ATCA 2210

Reaching SPP

The SPP node at I2 SALT is connected to I2's Infinera via ProtoGENI's ProCurve 5406 switch. SPP is also connected to I2's production IP/DCN network via I2's ProCurve switch.

Technical Contacts


IP Addresses

IP addresses have been assigned out of prefix 64.57.23.144/28.

The following addresses are only available to SPP administrators:

Device DNS Purpose IP
I2 Juniper T640 Gateway 64.57.23.145
R200 Control Processor 64.57.23.151
SPP Network Processor 64.57.23.210/30
SPP Network Processor 2 64.57.23.214/30
SPP Network Processor 3 64.57.23.216/30

VLAN IDs

Device Port Purpose VLAN ID
Radisys 7010 1 Test Network with ProtoGENI 3008
Radisys 7010 2 Test Network with ProtoGENI 3008
Radisys 7010 3 Test Network with ProtoGENI 3009
Radisys 7010 4 Test Network with ProtoGENI 3009
Radisys 7010 5 Test Network with ProtoGENI 3010
Radisys 7010 6 Test Network with ProtoGENI 3010
Radisys 7010 7 Test Network with ProtoGENI 3011



Equipment

Dell R200 Control Processor

Port Destination Device Dst. Port
A GPE2 A
B GPE1 B
C Netgear Console
D ATCA D
E Radisys ATCA 2210 E
3 I2 ProCurve C11

Netgear Prosafe switch (GSM7328S)

Port Destination Device Dst. Port
Module 1 ATCA 2210 (Slot 1) XFP 1/4
Console Control Processor C
1 Control Processor NetFPGA 0
2 Control Processor NetFPGA 1
3 Control Processor NetFPGA 2
4 Control Processor NetFPGA 3

ATCA Chassis

Slot 6 - Radisys ATCA 7010 (LC)

Port Destination Device Dst. Port
1 (back) ProtoGENI ProCurve C14
2 (back) ProtoGENI ProCurve C15
3 (back) ProtoGENI ProCurve C16
4 (back) ProtoGENI ProCurve C17
5 (back) ProtoGENI ProCurve C18
6 (back) ProtoGENI ProCurve C19
7 (back) ProtoGENI ProCurve C20
8 (back) I2 ProCurve C8
9 (back) I2 ProCurve C9
10 (back) I2 ProCurve C10
NPU-B Radisys 2210 SFP 1/7

Slot 5 - Radisys ATCA 7010 (NPE)

Port Destination Device Dst. Port
NPU-B Radisys 2210 SFP 1/8

Slot 4 - GPE2

Port Destination Device Dst. Port
A Control Processor A

Slot 3 - GPE1

Port Destination Device Dst. Port
B Control Processor B

Slot 2 - Empty

Slot 1 - Radisys ATCA 2210

Port Destination Device Dst. Port
SFP 3/1 (back) Control Processor 1
XFP 1/4 Netgear switch mm lc-lc module 1
SFP 1/6 Processor 2
SFP 1/7 LC NPU-B
SFP 1/8 NPE NPU-B
E Control Processor E




Attachments (1)

Download all attachments as: .zip