Back to the [[wiki:Integration GENI Integration Page]]
[[PageOutline]]

= Overview =
The SALT I2 PoP contains an SPP and ProtoGENI node.



{{{ 
#!comment 
[[Image(I2WASHRACKS.jpg, width=250)]][[BR]]
Photo of ProtoGENI/MAX deployment at I2 courtesy of Chris Tracy
}}}

[[BR]][[BR]][[BR]]


= ProtoGENI =

The hardware is arranged as follows:

[[Image(I2PoPWASH:protogeni-backbone-node.png,width=300)]]
 
[[Image(I2PoPWASH:protogeni-backbone-node2.png,width=300)]]

== Reaching ProtoGENI ==
The ProtoGENI node at I2 SALT is connected to I2's Infinera via its !ProCurve 5406 switch.  The same switch is also connected to I2's production IP/DCN network via I2's !ProCurve switch.  

The !ProCurve switch also has a connection to the University of Utah campus, which runs to the Emulab machine room. This
connection is made possible by Utah's regional network, UEN, and campus OIT.

This connection is currently implemented as follows:

  * Within the Internet2 suite in the SALT pop, a fiber is run from the `procurve-pgeni-salt` switch (port D3) to a
    distribution panel. This is a 10Gb port.
  * Level3 has run a cross-connect between the distribution panels in the Internet2 suite and the UEN suite, which is
    in the same building.
  * Within the UEN suite, a fiber patch connects the distribution panel to the UEN "summit" switch at 10Gbps
  * Packets from this cross-connect are carried up to campus on the 10Gbps connection used for all campus traffic. (In
    the future, we plan to carry this traffic on a dedicated 10Gb wave on a DWDM system.) "q-in-q" provider bridging is used
    to allow ProtoGENI to manage its own VLANs.
  * On campus, a fiber has been lit from the UEN switch in the EBC building to the MEB building (where
    the Emulab machine room is)
  * Within the Emulab machine room, the lit fiber lands on the switch `cisco12`

The connection looks like this:

[[Image(protogeni2salt.png,width=500)]]



=== Technical Contacts ===
 * Dan Reading (best to contact about PCs) dreading@flux.utah.edu
 * Rob Ricci (best to contact about switches) ricci@cs.utah.edu

[[BR]]

=== IP addresses ===

IP addresses have been assigned out of prefix 64.57.23.144/28. 


''The following addresses are only accessible to ProtoGENI administrators:''

|| Device || DNS || Purpose || IP ||
|| I2 Juniper T640 || || Gateway || 64.57.23.145 ||
|| !ProCurve 5406 Switch || || Management || 64.57.23.152 ||
|| ProtoGENI Node 1 || || Management || 64.57.23.146 ||
|| ProtoGENI Node 1 || || Data || 64.57.23.149 ||
|| ProtoGENI Node 2 || || Management || 64.57.23.147 ||
|| ProtoGENI Node 2 || || Data || 64.57.23.150 ||


=== VLAN IDs ===

Between the Utah campus and the SALT node, there is a single VLAN over UEN.  Q-in-Q will be used to carry GENI VLANs through this connection.

|| Device || Port || Purpose || VLAN ID ||
|| !ProCurve 5406 || C14 || Test Network with SPP || 3008 ||
|| !ProCurve 5406 || C15 || Test Network with SPP || 3008 ||
|| !ProCurve 5406 || C16 || Test Network with SPP || 3009 ||
|| !ProCurve 5406 || C17 || Test Network with SPP || 3009 ||
|| !ProCurve 5406 || C18 || Test Network with SPP || 3010 ||
|| !ProCurve 5406 || C19 || Test Network with SPP || 3010 ||
|| !ProCurve 5406 || C20 || Test Network with SPP || 3011 ||

[[BR]][[BR]]
== Equipment ==
=== HP !ProCurve 5406 switch ===
{{{
#!comment
[[Image(ProtoGENI-ProCurve-front.jpg,width=250,align=right)]]
}}}


 * ProtoGENI/Emulab short name: `procurve-pgeni-salt`
 * ProtoGENI URN: `urn:publicid:IDN+emulab.net+node+procurve-pgeni-salt`
 * ProtoGENI (Aggregate) Component Manager URN: `urn:publicid:IDN+emulab.net+authority+cm`

|| Port || Destination Device || Dst. Port ||
|| B1 || ''plugged in but unused'' Infinera || ? ||
|| B3 || ''10GB LR optics - planned future expansion to Seattle POP'' || ||
|| D1 || ''10GB LR optics - planned future expansion to Los Angeles POP'' || ||
|| D3 || 10Gbps connection to Utah campus via UEN|| ||
|| A1 || I2 HP !RackLan (data) || C12 ||
|| A2 || I2 HP !RackLan (management) || C13 ||
|| A3 || ProtoGENI Dell 1 || mnmgt ||
|| A4 || ProtoGENI Dell 1 || Gb2 ||
|| A5 || ProtoGENI Dell 1 || i1 ||
|| A6 || ProtoGENI Dell 1 || i2 ||
|| A7 || ProtoGENI Dell 1 || i3 ||
|| A8 || ProtoGENI Dell 1 || i4 ||
|| A9 || ProtoGENI Dell 1 || netfpga1p0 ||
|| A10 || ProtoGENI Dell 1 || netfpga1p1 ||
|| A11 || ProtoGENI Dell 1 || netfpga1p2 ||
|| A12 || ProtoGENI Dell 1 || netfpga1p3 ||
|| A13 || ProtoGENI Dell 1 || netfpga2p0 ||
|| A14 || ProtoGENI Dell 1 || netfpga2p1 ||
|| A15 || ProtoGENI Dell 1 || netfpga2p2 ||
|| A16 || ProtoGENI Dell 1 || netfpga2p3 ||
|| A17 || ProtoGENI Dell 2 || mnmgt ||
|| A18 || ProtoGENI Dell 2 || Gb2 ||
|| A19 || ProtoGENI Dell 2 || i1 ||
|| A20 || ProtoGENI Dell 2 || i2 ||
|| A21 || I2 DCN || ? ||
|| A22-A24 || ''empty - could be populated, 1GB optics must be purchased'' || ||
|| C1 || ProtoGENI Dell 2 || i3 ||
|| C2 || ProtoGENI Dell 2 || i4 ||
|| C3 || ProtoGENI Dell 2 || netfpga1p0 ||
|| C4|| ProtoGENI Dell 2 || netfpga1p1 ||
|| C5 || ProtoGENI Dell 2 || netfpga1p2 ||
|| C6 || ProtoGENI Dell 2 || netfpga1p3 ||
|| C7 || ProtoGENI Dell 2 || netfpga2p0 ||
|| C8 || ProtoGENI Dell 2 || netfpga2p1 ||
|| C9 || ProtoGENI Dell 2 || netfpga2p2 ||
|| C10 || ProtoGENI Dell 2 || netfpga2p3 ||
|| C11 || ShadowNet Node || ?? ||
|| C12 || ShadowNet Node || ?? ||
|| C13 || ShadowNet Node || ?? ||
|| C14-C20 || SPP ATCA || 1-7 ||
|| C21 || MX960 || ge9/1/2 (to Internet2 ION) ||
|| C22 || unused || ||
|| C23 || MX960 || ge9/1/0 (to WASH POP) ||
|| C24 || MX960 || ge9/1/1 (to KANS POP) ||
|| Slot E || ''empty'' || ||
|| Slot F || ''empty'' || ||

=== Dell 2950 ProtoGENI node 1 ===
{{{
#!comment
 [[Image(ProtoGENI-Dells-front.jpg,width=250,align=right)]]
}}}


 * ProtoGENI/Emulab short name: `pg44`
 * ProtoGENI URN: `urn:publicid:IDN+emulab.net+node+pg44`
 * Emulab hostname: `pg44.emulab.net`
 * Routable IP interface: `64.57.23.149`
 * ProtoGENI (Aggregate) Component Manager URN: `urn:publicid:IDN+emulab.net+authority+cm`

|| Port || Destination Device || Dst. Port ||
|| Gb1 || I2 HP 5406 || C14 ||
|| mnmgt || ProtoGENI !ProCurve || A3 ||
|| Gb2 || ProtoGENI !ProCurve || A4 ||
|| i1 || ProtoGENI !ProCurve || A5 ||
|| i2 ||  ProtoGENI !ProCurve || A6 ||
|| i3 || ProtoGENI !ProCurve || A7 ||
|| i4 ||  ProtoGENI !ProCurve || A8 ||
|| netfpga1p0 || ProtoGENI !ProCurve || A9 ||
|| netfpga1p1 || ProtoGENI !ProCurve || A10 ||
|| netfpga1p2 || ProtoGENI !ProCurve || A11 ||
|| netfpga1p3 || ProtoGENI !ProCurve || A12 ||
|| netfpga2p0 || ProtoGENI !ProCurve || A13 ||
|| netfpga2p1 || ProtoGENI !ProCurve || A14 ||
|| netfpga2p2 || ProtoGENI !ProCurve || A15 ||
|| netfpga2p3 || ProtoGENI !ProCurve || A16 ||



=== Dell 2950 ProtoGENI node 2 ===
{{{
#!comment
[[Image(ProtoGENI-Dells-back.jpg,width=300,align=right)]]
}}}

 * ProtoGENI/Emulab short name: `pg45`
 * ProtoGENI URN: `urn:publicid:IDN+emulab.net+node+pg45`
 * Emulab hostname: `pg45.emulab.net`
 * Routable IP interface: `64.57.23.150`
 * ProtoGENI (Aggregate) Component Manager URN: `urn:publicid:IDN+emulab.net+authority+cm`

|| Port || Destination Device || Dst. Port ||
|| Gb1 || I2 HP 5406 || C15 ||
|| mnmgt || ProtoGENI !ProCurve || A17 ||
|| Gb2 || ProtoGENI !ProCurve || A18 ||
|| i1 || ProtoGENI !ProCurve || A19 ||
|| i2 ||  ProtoGENI !ProCurve || A20 ||
|| i3 || ProtoGENI !ProCurve || C1 ||
|| i4 ||  ProtoGENI !ProCurve || C2 ||
|| netfpga1p0 || ProtoGENI !ProCurve || C3 ||
|| netfpga1p1 || ProtoGENI !ProCurve || C4 ||
|| netfpga1p2 || ProtoGENI !ProCurve || C5 ||
|| netfpga1p3 || ProtoGENI !ProCurve || C6 ||
|| netfpga2p0 || ProtoGENI !ProCurve || C7 ||
|| netfpga2p1 || ProtoGENI !ProCurve || C8 ||
|| netfpga2p2 || ProtoGENI !ProCurve || C9 ||
|| netfpga2p3 || ProtoGENI !ProCurve || C10 ||



[[BR]][[BR]][[BR]]











= SPP =
[[PageOutline]]

== Reaching SPP == 
The SPP node at I2 SALT is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch.  SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch.



=== Technical Contacts ===
 * John !DeHart (best to contact first) jdd@arl.wustl.edu
 * David Zar dzar@wustl.edu
[[BR]] 

=== IP Addresses ===

IP addresses have been assigned out of prefix 64.57.23.144/28.


''The following addresses are only available to SPP administrators:''

|| Device || DNS || Purpose || IP ||
|| I2 Juniper T640 || || Gateway || 64.57.23.145 ||
|| R200 Control Processor || || || 64.57.23.151  ||
|| SPP Network Processor || || || 64.57.23.210/30 ||
|| SPP Network Processor 2 || || || 64.57.23.214/30 ||
|| SPP Network Processor 3 || || || 64.57.23.216/30 ||


=== VLAN IDs ===

|| Device || Port || Purpose || VLAN ID ||
|| Radisys 7010 || 1 || Test Network with ProtoGENI || 3008 ||
|| Radisys 7010 || 2 || Test Network with ProtoGENI || 3008 ||
|| Radisys 7010 || 3 || Test Network with ProtoGENI || 3009 ||
|| Radisys 7010 || 4 || Test Network with ProtoGENI || 3009 ||
|| Radisys 7010 || 5 || Test Network with ProtoGENI || 3010 ||
|| Radisys 7010 || 6 || Test Network with ProtoGENI || 3010 ||
|| Radisys 7010 || 7 || Test Network with ProtoGENI || 3011 ||



[[BR]][[BR]]
== Equipment ==

=== Dell R200 Control Processor ===
{{{
#!comment
  [[Image(spp-dell-front.jpg,width=300,align=right)]]
}}}

|| Port || Destination Device || Dst. Port ||
|| A || GPE2 || A ||
|| B || GPE1 || B ||
|| C || Netgear Console ||
|| D || ATCA || D ||
|| E || Radisys ATCA 2210 || E ||
|| 3 || I2 !ProCurve || C11 ||

=== Netgear Prosafe switch (GSM7328S) ===
{{{
#!comment
[[Image(spp-netgear-front.jpg,width=300,align=right)]]
}}}
|| Port || Destination Device || Dst. Port ||
|| Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 ||
|| Console || Control Processor || C ||
|| 1 || Control Processor || NetFPGA 0 ||
|| 2 || Control Processor || NetFPGA 1 ||
|| 3 || Control Processor || NetFPGA 2 ||
|| 4 || Control Processor || NetFPGA 3 ||
 

=== ATCA Chassis ===
{{{
#!comment
  [[Image(SPP-Backbone-Node.jpg,width=250,align=right)]]
}}}
==== Slot 6 - Radisys ATCA 7010 (LC) ====
|| Port || Destination Device || Dst. Port ||
|| 1 (back) || ProtoGENI !ProCurve || C14 ||
|| 2 (back) || ProtoGENI !ProCurve || C15 ||
|| 3 (back) || ProtoGENI !ProCurve || C16 ||
|| 4 (back) || ProtoGENI !ProCurve || C17 ||
|| 5 (back) || ProtoGENI !ProCurve || C18 ||
|| 6 (back) || ProtoGENI !ProCurve || C19 ||
|| 7 (back) || ProtoGENI !ProCurve || C20 ||
|| 8 (back) || I2 !ProCurve || C8 ||
|| 9 (back) || I2 !ProCurve || C9 ||
|| 10 (back) || I2 !ProCurve || C10 ||
|| NPU-B || Radisys 2210 || SFP 1/7 ||

==== Slot 5 - Radisys ATCA 7010 (NPE) ====
{{{
#!comment
[[Image(spp-node-front.jpg,width=200,align=right)]]  [[Image(spp-node-back.jpg,width=200,align=right)]]
}}}
|| Port || Destination Device || Dst. Port || 
|| NPU-B || Radisys 2210 || SFP 1/8 ||

==== Slot 4 - GPE2 ====
|| Port || Destination Device || Dst. Port ||
|| A || Control Processor || A ||


==== Slot 3 - GPE1 ====
|| Port || Destination Device || Dst. Port ||
|| B || Control Processor || B ||

==== Slot 2 - Empty ====

==== Slot 1 - Radisys ATCA 2210 ====
|| Port || Destination Device || Dst. Port ||
|| SFP 3/1 (back) || Control Processor || 1 ||
|| XFP 1/4 || Netgear switch mm lc-lc || module 1 ||
|| SFP 1/6 || Processor || 2 ||
|| SFP 1/7 || LC || NPU-B ||
|| SFP 1/8 || NPE || NPU-B ||
|| E || Control Processor || E ||


[[BR]][[BR]][[BR]]