Changes between Version 3 and Version 4 of HowTo/UseOpenFlowHWSwitchesIG


Ignore:
Timestamp:
02/07/17 14:54:40 (6 years ago)
Author:
pjayanth@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • HowTo/UseOpenFlowHWSwitchesIG

    v3 v4  
    1 This page provides a guide on how to do the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS OpenFlowOVS tutorial] using the Hardware OpenFlow switches present at the IG racks. This can server as a general guide on how to use the HW switches.
     1This page provides a guide on how to do the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight OpenFlowOVS tutorial] using the Hardware OpenFlow switches present at the IG racks. This can server as a general guide on how to use the HW switches.
    22
    33[[PageOutline]]
    44== Step 1.  Obtain resources ==
    55
    6    * The topology used in this experiment is the same as the one used in the  [wiki:GENIExperimenter/Tutorials/OpenFlowOVS/DesignSetup OpenFlow using OVS] part of this tutorial: Three virtual machines (VMs) connected by an !OpenFlow switch. However this tutorial uses the hardware !OpenFlow switch on the rack instead of a software OVS switch.
     6   * The topology used in this experiment is the same as the one used in the  [wiki:GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/DesignSetup OpenFlow using OVS] part of this tutorial: Three virtual machines (VMs) connected by an !OpenFlow switch. However this tutorial uses the hardware !OpenFlow switch on the rack instead of a software OVS switch.
    77   * If you have not reserved a controller yet, make sure to create a slice that will run the !OpenFlow controller by reserving a VM running the controller using the request RSpec [http://www.gpolab.bbn.com/experiment-support/OVSFloodLight/ControllerCustom_request_rspec.xml] .
    88