| 1 | Here's a description of the Hello GENI experiment; we're still fleshing this out. |
| 2 | |
| 3 | = Overview = |
| 4 | |
| 5 | This experiment is just a quick way to reserve some resources and see if they can talk to each other. It uses an IP subnet, which you have to allocate from a pool that the GPO maintains, but the rest of the resources, you can provision yourself. |
| 6 | |
| 7 | = IP subnets = |
| 8 | |
| 9 | We've set aside 10.42.0.0/16 as a pool of IP subnets for this. We're currently using 10.42.101.0/24 - 10.42.110.0/24 for the Plastic Slices project, and have 10.42.111.0/24 - 10.42.120.0/24 available for other uses. |
| 10 | |
| 11 | = MyPLC hosts = |
| 12 | |
| 13 | Here are the MyPLC hosts that support Hello GENI: |
| 14 | |
| 15 | || '''hostname''' || '''MAC address''' || '''IP address''' || |
| 16 | || ganel.gpolab.bbn.com || 00:1B:21:4B:3F:AD || 10.42.xxx.51 || |
| 17 | || gardil.gpolab.bbn.com || 00:1B:21:4B:3E:E9 || 10.42.xxx.52 || |
| 18 | || sardis.gpolab.bbn.com || 00:1B:21:5A:E6:A5 || 10.42.xxx.53 || |
| 19 | || bain.gpolab.bbn.com || 00:1B:21:5F:8F:E1 || 10.42.xxx.54 || |
| 20 | || navis.gpolab.bbn.com || 00:1B:21:5A:E6:A9 || 10.42.xxx.55 || |
| 21 | || || || || |
| 22 | || pl1.myplc.grnoc.iu.edu || 00:15:C5:E7:A8:0E || 10.42.xxx.70 || |
| 23 | || pl3.myplc.grnoc.iu.edu || 00:11:43:D4:F7:29 || 10.42.xxx.71 || |
| 24 | || || || || |
| 25 | || pl01.cs.washington.edu || 00:B0:D0:E1:6F:86 || 10.42.xxx.80 || |
| 26 | || pl02.cs.washington.edu || 00:B0:D0:E1:6F:87 || 10.42.xxx.81 || |
| 27 | || || || || |
| 28 | || of-planet2.stanford.edu || 00:14:D1:19:43:F4 || 10.42.xxx.91 || |
| 29 | || of-planet3.stanford.edu || 08:00:27:61:68:87 || 10.42.xxx.92 || |
| 30 | || of-planet4.stanford.edu || 08:00:27:F7:3B:EE || 10.42.xxx.93 || |
| 31 | || || || || |
| 32 | || plnode1.cip.gatech.edu || 00:50:56:96:55:83 || 10.42.xxx.100 || |
| 33 | || plnode2.cip.gatech.edu || 00:50:56:96:06:81 || 10.42.xxx.101 || |
| 34 | || || || || |
| 35 | || planetlab4.clemson.edu || 00:1B:21:75:7A:92 || 10.42.xxx.104 || |
| 36 | || planetlab5.clemson.edu || 00:0E:0C:2C:EC:30 || 10.42.xxx.105 || |
| 37 | || || || || |
| 38 | || orbitplc1.orbit-lab.org || D8:D3:85:67:06:3D || 10.42.xxx.Y || |
| 39 | || orbitplc2.orbit-lab.org || D8:D3:85:65:33:D5 || 10.42.xxx.Y || |
| 40 | || || || || |
| 41 | || wings-openflow-2.wail.wisc.edu || || 10.42.xxx.Y || |
| 42 | || wings-openflow-3.wail.wisc.edu || || 10.42.xxx.Y || |
| 43 | |
| 44 | (We still need to add info for the Rutgers and Wisconsin hosts.) |
| 45 | |
| 46 | Each host uses the same fourth octet on all of the subnets that it's on. |
| 47 | |
| 48 | For each subnet, the host should have an interface eth1.<vlan>:42xxx with that IP address, where <vlan> is the VLAN that the subnet should be on. |
| 49 | |
| 50 | = Et cetera = |
| 51 | |
| 52 | We still need to add more info here, like how to allocate these resources and use them, but wanted to get the table of MAC addresses and IP addresses out ASAP. |