wiki:GpoDoc

Version 35 (modified by hmussman@bbn.com, 9 years ago) (diff)

--

Documents published by the GENI Project Office

GPO documents have the following classifications:

Adopted Recommendation - Documents that reflect the current GENI design, policy, or procedures in effect at this time.

Draft Recommendation - Candidate recommendations that are open to comments or suggested changes.

Informational - Descriptive or analytical documents intended to provide process, background, or other contextual information about GENI.


Adopted Recommendations

GENI Recommended Use Policy

GENI-INF-RUP-01.1
This document communicates common guidelines for using the suite of GENI infrastructures to the GENI community. GENI participants should be willing to follow the guidelines, and to support GENI community efforts to implement this policy.
http://groups.geni.net/geni/attachment/wiki/RUP/RUP.pdf (updated 3/10/09)
This document has a wiki page at RUP. This document has been reviewed by the OMIS working group (see GeniOmisGEC4), and is adopted for use in GENI Spiral 2.

GENI Working Groups

This document defines the structure and operations of GENI working groups.
http://groups.geni.net/geni/attachment/wiki/GeniWorkingGroupDoc/geni-wgs-20070920.pdf
This document has a wiki page at [GeniWorkingGroupDoc].


Draft Recommendations

Lifecycle of a GENI Experiment

GENI-SE-SY-TS-UC-LC-01.0
This document describes an experimenter’s view of the lifecycle of an experiment in the GENI environment. The objective of this document is to understand the workflow of the experimenter and identify tools and services needed to simplify experimentation in GENI.
http://groups.geni.net/geni/attachment/wiki/ExperimentLifecycleDocument/ExperimentLifeCycle-v01.2.pdf (updated 4/30/09)
This document has a wiki page at ExperimentLifecycleDocument.

Experimenter Tools and Services: Spiral 1 Capabilities

This draft document, published as an appendix to the Lifecycle of a GENI Experiment document, describes experimenter tools and services available from each of the GENI Spiral 1 clusters
http://groups.geni.net/geni/attachment/wiki/ExperimentLifecycleDocument/Spiral1-Capabilities-appendix.pdf

GENI System Requirements

GENI-SE-SY-RQ-02.0
This document specifies GENI system requirements. This document specifies requirements for the system as a whole: that is, all requirements listed in this document pertain to the overall system. They form the basis of further derived requirements that then flow down to the various subsystems, which are in turned captured in Requirements Documents for those subsystems.
http://groups.geni.net/geni/attachment/wiki/SysReqDoc/GENI-SE-SY-RQ-02.0.pdf (updated 7/7/09)
This document now has a wiki page at SysReqDoc.

GENI Control Framework Requirements

GENI-SE-CF-RQ-01.3
This document defines the GENI control framework subsystem, and then specifies its requirements. It is a DRAFT, to be used for discussion in the GENI Control Framework working group. Once approved, it can be used as a guide to judge the completeness of prototype control framework designs, and as a guide to their continued evolution.
http://groups.geni.net/geni/attachment/wiki/GeniControlFrameworkRequirements/010909b%20%20GENI-SE-CH-RQ-01.3.pdf (updated 1/9/09)
This document has a wiki page at GeniControlFrameworkRequirements.

GENI Instrumentation and Measurement Architecture

GENI-SE-IM-ARCH-0.1
This document defines the architecture for the GENI instrumentation and measurement subsystem. It is an early DRAFT, to be used for discussion in the GENI Instrumentation and Measurement working group, starting at the GEC7 meeting.
http://groups.geni.net/geni/attachment/wiki/GeniInstrumentationandMeasurementsArchitecture/030810%20%20GENI-SE-IM-ARCH-0.1.pdf (updated 3/8/09)

This document has a wiki page at GeniInstrumentationandMeasurementsArchitecture.


Informational

ProtoGENI Control Framework Overview

GENI-SE-CF-PRGO-01.3
This document provides an overview of the ProtoGENI control framework being implemented for Spiral 1, for use in Cluster C. It is a DRAFT, to be used for discussion in the GENI Control Framework working group. (Note: A review of this document by the ProtoGENI team is underway, but has not yet been completed.) It provides a description of the ProtoGENI control framework structure, a summary of how it meets the requirements as presented in the “GENI Control Framework Requirements”, and a view of its implementation at the start and the finish of Spiral 1.
http://groups.geni.net/geni/attachment/wiki/ProtoGeniControlFrameworkOverview/011409%20%20GENI-SE-CF-ProtoGENIOver-01.3.pdf (updated 1/14/09)
This document has a wiki page at ProtoGeniControlFrameworkOverview .

ORCA GENI Control Framework Overviews

GENI-SE-CF-ORGO-01.2
This document provides an overview of the ORCA GENI control framework being implemented for Spiral 1, for use in Cluster D. It is a DRAFT, to be used for discussion in the GENI Control Framework working group. (Note: A review of this document by the ORCA team is underway, but has not yet been completed.) It provides a description of the ORCA GENI control framework structure, a summary of how it meets the requirements as presented in the “GENI Control Framework Requirements”, and a view of its implementation at the start and the finish of Spiral 1.
http://groups.geni.net/geni/attachment/wiki/OrcaGeniControlFrameworkOverview/011409%20%20GENI-SE-CF-ORCAGENIOver-01.2.pdf (updated 1/9/09)
This document has a wiki page at OrcaGeniControlFrameworkOverview.

PlanetLab GENI Control Framework Overview

GENI-SE-CF-PLGO-01.2
This document provides an overview of the PlanetLab GENI control framework being implemented for Spiral 1, for use in Cluster B. It is a DRAFT, to be used for discussion in the GENI Control Framework working group. (Note: A review of this document by the PlanetLab team is underway, but has not yet been completed.) It provides a description of the PlanetLab GENI control framework structure, a summary of how it meets the requirements as presented in the “GENI Control Framework Requirements”, and a view of its implementation at the start and the finish of Spiral 1.
http://groups.geni.net/geni/attachment/wiki/PlanetLabGeniControlFrameworkOverview/011409%20%20GENI-SE-CF-PlanetLabGENIOver-01.2.pdf (updated 1/14/09)
This document has a wiki page at PlanetLabGeniControlFrameworkOverview.

GENI System Overview

GENI-SE-SY-SO-02.0
This document is intended to help readers unfamiliar to the GENI project understand the design through examples and discussions of key elements and concepts. It has been revised to reflect an improved understanding of the major subsystems and their interfaces.
http://groups.geni.net/geni/attachment/wiki/GeniSysOvrvw/GENISysOvrvw092908.pdf (updated 9/29/08)
This document has a wiki page at [GeniSysOvrvw].

GENI Spiral 1 Overview

GENI-INF-PRO-S1-OV-1.12
This document provides a brief introduction to GENI Spiral 1, the first phase of GENI prototyping. It identifies the goals of Spiral 1, the various research projects that will be integrated to form Spiral 1, and the ways in which they will be integrated.
http://groups.geni.net/geni/attachment/wiki/SpiralOne/GENIS1Ovrvw092908.pdf

Spiral 1 Substrate Catalog

GENI-INF-PRO-S1-CAT-01.5
The substrate catalog provides detailed information on each of the substrate projects integrating into Spiral 1 control frameworks.
http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc
A descrition of required information found in this document