[[PageOutline]] = Trust anchors for GENI aggregates = This page lists various trust anchors which GENI aggregates can use. There's a section for the authorities that the GPO recommends for all GENI aggregates, and a second section for authorities which some aggregates may want to trust in unusual circumstances. A note on certificate types: * A self-signed SA certificate can be added to an aggregate's list of trusted certificates by itself --- it contains everything the aggregate needs in order to trust that slice authority * Trusting the self-signed CA certificate for the GENI clearinghouse should be all that is needed to complete the chain to the clearinghouse's trust root. * An SA certificate which was signed by a self-signed CA certificate requires the inclusion of both the SA and the CA certificates. = Recommended GENI slice authorities = As of May 2015, the GPO recommends that all GENI aggregates trust the following GENI slice authorities (aka "the GENI cert bundle"), allowing the users at those SAs to use resources at GENI racks, GENI backbone and regional networks, etc. The table below includes links to the certificate file for each trust anchor. || '''Description''' || '''Hostname''' || '''Certificate type''' || '''Certificate Expiration''' || '''!File/Checksum''' || || GENI Clearinghouse || ch.geni.net || CA (self-signed) || 2023-10-22 || [attachment:cacert.pem 01a0938e74de99fb01e6a2c5b803679a] || || GENI Slice Authority(SA) || N/A || CA (self-signed) || 2023-10-22 || [attachment:sa-cert.pem 0bac62615d5c6df2408629b3a1881222] || || GENI Member Authority(MA) || N/A || CA (self-signed) || 2023-10-22 || [attachment:ma-cert.pem f17373fb37329629ba325f5850c23fda] || || Utah ProtoGENI || emulab.net || CA (self-signed) || 2020-10-27 || [attachment:emulab.pem ffee3bd7ff3b7cd16ef1c10087adeee5] || || Utah ProtoGENI SA || N/A || SA (signed by Utah CA) || 2020-10-28 || [attachment:genisa.pem 6d7231420e411d51cb18d44d16a6f863] || You can also download the entire bundle as a [attachment:geni-cert-bundle.tar.gz compressed tar file]. The md5sum for the .tar.gz file itself is b8643cb0a695ff0ce2c6683e1031d133. Refer to aggregate-specific instructions for how to configure your aggregate to trust a particular certificate.