Changes between Version 87 and Version 88 of GeniTmixTutorialPortal

Timestamp:

03/15/16 16:45:21 (8 years ago)

Author:

Ben Newton

Comment:

--

GeniTmixTutorialPortal

@@ -59 +59 @@
 19. The next page will indicate that it is reserving the requested resources.  It may take a few minutes.  Once the resources are allocated you will see a detailed list of the reserved resources.
 
-[[Image(ready.png, 30%)]]
+[[Image(reserved.png, 30%)]]
 
 20.  Now, click on the '''Back to Slice <slicename>''' link at the bottom of the page to return to the Slice page.  Scroll down to the Manage Resources section.  You should see a diagram of your network.  Once the nodes in the diagram turn light-green, your resources are ready to be used.  It may take up to 10 minutes to re-image, boot, and configure the systems.  Please be patient.  For more details, click the '''Details''' button to view the detailed status of the resources.  Likely the status page will show that the hosts are not yet ready.  The resources have been allocated, but the nodes are being imaged, and booted.  This process can take up to 10 minutes.  
@@ -67 +67 @@
 Click '''Refresh Status''' until the status changes to READY.  
 
-[[Image(StatusReady.png, 30%)]]
+[[Image(ready.png, 30%)]]
 
 21. Before leaving this page, note your login line of each of the two nodes listed.  Each login line will contain the hostname of the node, for example pc339.emulab.net, as well as the port number.  You will need both the hostame and port of both nodes later in this tutorial.  You can write them down, or return to this details page later.