| 1 | [[PageOutline]] |
| 2 | |
| 3 | = Wayne State Operational Data = |
| 4 | |
| 5 | This page captures GENI rack information that is intended for Operators. The goal is to capture site contacts, connectivity, and VLANs. |
| 6 | |
| 7 | Note anything unusual about this rack in this section. For example, this is a 12-node rack instead of a standard 5-node rack. |
| 8 | |
| 9 | == Contacts == |
| 10 | |
| 11 | Site contact information: |
| 12 | * Contact Name: |
| 13 | * Contact Email: |
| 14 | |
| 15 | ----- |
| 16 | == Data Plane == |
| 17 | |
| 18 | This section captures data plane information for Wayne State detailing site topology, VLAN, Network Providers (I2/Regional) and network address information. Be sure to note the total link bandwidth of data plane connections. Note the vendor and model for any OpenFlow switches that are not part of a GENI rack. |
| 19 | |
| 20 | Additional sites that are important to operations for this one (e.g. VLANs through a non-GENI regional) should also be captured here. |
| 21 | |
| 22 | === Data plane connectivity === |
| 23 | |
| 24 | <<Insert meso-scale or other relevant L2 dataplane diagram here>>> |
| 25 | |
| 26 | |
| 27 | === Layer 2 information === |
| 28 | |
| 29 | Provide layer 2 information for Circuits VLANs, plus network connection end-points, and purpose of VLAN. |
| 30 | |
| 31 | *''In the VLAN column, a single ID indicates that the port is an access port. A T followed by one or more IDs indicates that the port is a trunk (aka tagged) port with those VLAN IDs.'' |
| 32 | |
| 33 | ==== Rack Data Plane Switch ==== |
| 34 | ||'''Port'''||'''Connects To'''||'''VLAN Config*'''|| |
| 35 | <<Insert port to VLAN mappings here>>> |
| 36 | |
| 37 | === Layer 3 information === |
| 38 | <<Insert available layer 3 information here. If not applicable, replace with "none".>> |
| 39 | |
| 40 | === Experimental VLANs === |
| 41 | |
| 42 | Provide a table of Experimental VLAN detailing VLAN numbers, the endpoints, its purposes and whether VLAN is OF or non-OF. |
| 43 | |
| 44 | ||'''VLAN ID'''||'''OF Controlled?'''||'''Purpose''' || |
| 45 | <<Insert OF and non-OF experimenter VLANs and expected use>> |
| 46 | |
| 47 | |
| 48 | === VLAN Translation Table === |
| 49 | << If applicable provide details for VLAN translation. If not applicable, replace with "none".>> |
| 50 | |
| 51 | === Non-VLAN Connections === |
| 52 | << If applicable provide details for non VLAN connections. If not applicable, replace with "none".>> |
| 53 | |
| 54 | === Campus Connections === |
| 55 | << Provide details for campus connection. If none are available, replace with "none".>> |
| 56 | |
| 57 | == Public Internet == |
| 58 | |
| 59 | |
| 60 | ----- |
| 61 | |
| 62 | == Control Plane == |
| 63 | |
| 64 | This section captures Control plane information for OSF detailing topology and network address information. Additional site which is not specified, but deemed important, can also be captured here. |
| 65 | |
| 66 | === Control Plane Connectivity === |
| 67 | |
| 68 | <<Provide a diagram that captures device, port for the Control plane topology. Additional control network specific data which is not specified, but deemed important, can also be captured here. >> |
| 69 | |
| 70 | === Resource control subnets === |
| 71 | |
| 72 | <<Enter Control network subnet>> |
| 73 | |
| 74 | === Firewall/IP tables === |
| 75 | |
| 76 | << If firewall or IP tables are in use, insert who is responsible and any information deemed of importance about the setup. >> |
| 77 | |
| 78 | ----- |
| 79 | |
| 80 | == Experiment Resources == |
| 81 | |
| 82 | Links to resource and network aggregates available for experimenters for WayneState: |
| 83 | - [wiki:GeniAggregate/WayneStateExoGENI] |
| 84 | - [wiki:GeniAggregate/WayneStateExoGENIOpenflow] |