= Experiment Resources Scenarios = This page captures status and execution details for the Experiment Resources Scenarios. For overall status see the [http://groups.geni.net/geni/wiki/GeniNetworkStitchingTestStatus GENI Network Stitching Test Status] page and for test details see the [http://groups.geni.net/geni/wiki/GeniNetworkStitchingTestPlan GENI Network Stitching Test Plan] page. ''Last update: 06/06/13'' || '''Scenario''' || '''State''' || ''' Ticket ''' || '''Comments''' || [[BR]] || '''State Legend''' || '''Description''' || || [[Color(green,Pass)]] || Test completed and met all criteria || || [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented || || [[Color(red,Fail)]] || Test completed and failed to meet criteria. || || [[Color(yellow,Complete)]] || Test completed but will require re-execution due to expected changes || || [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). || || [[Color(#63B8FF,In Progress)]] || Currently under test. || [[BR]] = Test Execution = '''Assumptions:''' - pgeni.gpolab.bbn.com credential are use for tests in this page. - Unless otherwise stated, all tests in this page use a stitched sliver from IG GPO to IG Utah, which includes: * GPO InstaGENI - https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am * Internet2/ION - http://geni-am.net.internet2.edu:12346 * Utah PG - https://www.emulab.net:12369/protogeni/xmlrpc/am * Utah InstaGENI - https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am '''Notes:''' - Stitcher currently does not support AM API v3, because the PG AMs that claimed to do V3 were doing it incorrectly, so stitcher is delivered to run AM API V2. - Capacity '''must''' be specified for scenarios where Utah IG is end-point. = Experimenter Resources Scenarios = This test case verified the the ability to create, use, and release resources for all the resource scenarios described in this plan. == Single slice with two endpoints using single stitched VLAN == This test verifies the following: * 1 slice includes: (Aggr1<->VLAN1<->Aggr2) The sliver that was actually used included 1 slice named 1sl-2aggr-1lnk that used the following topology: * GPO IG VM <->Internet2/ION Aggregate <-> Utah PG Aggregate <-> Utah IG VM == Single slice with two endpoints using multiple stitched VLANs == * 1 slice includes: (Aggr1<->VLAN1<->Aggr2) + (Aggr1<->VLAN2<->Aggr2) + (Aggr1<->VLAN3<->Aggr2) == Multiple slices each with two endpoints using single stitched VLAN == * slice1 includes: (Aggr1<->VLAN1<->Aggr2) * slice2 includes: (Aggr1<->VLAN2<->Aggr2) == Multiple slices each with two endpoints using multiple stitched VLANs == * slice1 includes: (Aggr1<->VLAN1<->Aggr2) + (Aggr1<->VLAN2<->Aggr2) * slice2 includes: (Aggr1<->VLAN3<->Aggr2) + (Aggr1<->VLAN4<->Aggr2)