wiki:GeniNetworkStitchingTestStatus/Resources

Version 2 (modified by lnevers@bbn.com, 6 years ago) (diff)

--

Experiment Resources Scenarios

This page captures status and execution details for the Experiment Resources Scenarios. For overall status see the GENI Network Stitching Test Status page and for test details see the GENI Network Stitching Test Plan page.

Last update: 06/06/13

Scenario State Ticket Comments


State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.


Test Execution

Assumptions:

Notes:

  • Stitcher currently does not support AM API v3, because the PG AMs that claimed to do V3 were doing it incorrectly, so stitcher is delivered to run AM API V2.
  • Capacity must be specified for scenarios where Utah IG is end-point.

Experimenter Resources Scenarios

This test case verified the the ability to create, use, and release resources for all the resource scenarios described in this plan.

Single slice with two endpoints using single stitched VLAN

This test verifies the following:

  • 1 slice includes: (Aggr1<->VLAN1<->Aggr2)

The sliver that was actually used included 1 slice named 1sl-2aggr-1lnk that used the following topology:

  • GPO IG VM <->Internet2/ION Aggregate <-> Utah PG Aggregate <-> Utah IG VM

Single slice with two endpoints using multiple stitched VLANs

  • 1 slice includes: (Aggr1<->VLAN1<->Aggr2) + (Aggr1<->VLAN2<->Aggr2) + (Aggr1<->VLAN3<->Aggr2)

Multiple slices each with two endpoints using single stitched VLAN

  • slice1 includes: (Aggr1<->VLAN1<->Aggr2)
  • slice2 includes: (Aggr1<->VLAN2<->Aggr2)

Multiple slices each with two endpoints using multiple stitched VLANs

  • slice1 includes: (Aggr1<->VLAN1<->Aggr2) + (Aggr1<->VLAN2<->Aggr2)
  • slice2 includes: (Aggr1<->VLAN3<->Aggr2) + (Aggr1<->VLAN4<->Aggr2)

Attachments (2)

Download all attachments as: .zip