= Operator Functions Tests = This page captures status and execution details for the Operator Functions tests. For overall status see the [http://groups.geni.net/geni/wiki/GeniNetworkStitchingTestStatus GENI Network Stitching Test Status] page and for test details see the [http://groups.geni.net/geni/wiki/GeniNetworkStitchingTestPlan GENI Network Stitching Test Plan] page. ''Last update: 06/11/13'' || '''Function''' || '''State''' || ''' Ticket ''' || '''Comments''' || || VLAN Delegation || || || || || VLAN Configuration || || || || || Bandwidth Allocation|| || || || [[BR]] || '''State Legend''' || '''Description''' || || [[Color(green,Pass)]] || Test completed and met all criteria || || [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented || || [[Color(red,Fail)]] || Test completed and failed to meet criteria. || || [[Color(yellow,Complete)]] || Test completed but will require re-execution due to expected changes || || [[Color(orange,Blocked)]] || Blocked by ticketed issue(s). || || [[Color(#63B8FF,In Progress)]] || Currently under test. || [[BR]] = Test Execution = '''Assumptions:''' - pgeni.gpolab.bbn.com credential are used for tests in this page. '''Notes:''' - Stitcher currently does not support AM API v3, because the PG AMs that claimed to do V3 were doing it incorrectly, so stitcher is delivered to run AM API V2. - Capacity '''must''' be specified for scenarios where Utah IG is end-point. == 1.0 VLAN Delegation == The tests captured in this section verify ability for a GENI operator to delegate VLAN for the functions described below. === 1.1 Non-OF VLAN allocation === Allocate non-OF VLAN for use by GENI Aggregates responsible for stitching path. === 1.2 Aggregate Advertisement verification === Verify Aggregate Advertisement RSpec reflects the non-OF VLAN allocation == 2.0 VLAN Configuration == This section verified various VLAN configuration operations that operator will use to manage the stitching environment. === 2.1 Add/modify/delete available VLANs === Add/Modify/Delete the VLANs available for the aggregate. Verify that Advertisement reflects changes for each of the add/modify/delete operation. === 2.2. Modify VLAN endpoints === Modify the endpoints for a VLAN and verify Advertisement reflects change. == 3.0 Bandwidth Allocation == This test section verifies the ability for an operator to manage bandwidth and its allocation. Verify ability of operator to allocate bandwidth for their ION connector that can be used for stitching. Also verify that the Aggregate Advertisement RSpec reflects bandwidth allocation defined by operator ''Note:'' allocation does not require bandwidth enforcement at this point in time.