| 22 | |
| 23 | |
| 24 | = Test Execution = |
| 25 | |
| 26 | '''Assumptions:''' |
| 27 | - pgeni.gpolab.bbn.com credential are used for tests in this page. |
| 28 | |
| 29 | '''Notes:''' |
| 30 | - Stitcher currently does not support AM API v3, because the PG AMs that claimed to do V3 were doing it incorrectly, so stitcher is delivered to run AM API V2. |
| 31 | - Capacity '''must''' be specified for scenarios where Utah IG is end-point. |
| 32 | |
| 33 | |
| 34 | == 1.0 VLAN Delegation == |
| 35 | |
| 36 | The tests captured in this section verify ability for a GENI operator to delegate VLAN for the functions described below. |
| 37 | |
| 38 | === 1.1 Non-OF VLAN allocation === |
| 39 | |
| 40 | Allocate non-OF VLAN for use by GENI Aggregates responsible for stitching path. |
| 41 | |
| 42 | === 1.2 Aggregate Advertisement verification === |
| 43 | |
| 44 | Verify Aggregate Advertisement RSpec reflects the non-OF VLAN allocation |
| 45 | |
| 46 | == 2.0 VLAN Configuration == |
| 47 | This section verified various VLAN configuration operations that operator will use to manage the stitching environment. |
| 48 | |
| 49 | === 2.1 Add/modify/delete available VLANs === |
| 50 | |
| 51 | Add/Modify/Delete the VLANs available for the aggregate. Verify that Advertisement reflects changes for each of the add/modify/delete operation. |
| 52 | |
| 53 | === 2.2. Modify VLAN endpoints === |
| 54 | |
| 55 | Modify the endpoints for a VLAN and verify Advertisement reflects change. |
| 56 | |
| 57 | |
| 58 | == 3.0 Bandwidth Allocation == |
| 59 | |
| 60 | This test section verifies the ability for an operator to manage bandwidth and its allocation. |
| 61 | |
| 62 | Verify ability of operator to allocate bandwidth for their ION connector that can be used for stitching. |
| 63 | Also verify that the Aggregate Advertisement RSpec reflects bandwidth allocation defined by operator |
| 64 | |
| 65 | ''Note:'' allocation does not require bandwidth enforcement at this point in time. |
| 66 | |