wiki:GeniNetworkStitchingTestStatus/Functional

Version 53 (modified by lnevers@bbn.com, 11 years ago) (diff)

--

Stitching Functional Tests

This page captures status and execution details for the Stitching Functional tests. For overall status see the GENI Network Stitching Test Status page and for test details see the GENI Network Stitching Test Plan page.

Last update: 06/10/13

Function State Ticket Comments
GENI AM API Functions Color(yellow,Complete)? #1031 #1036 #1039 #1040 #1043
RSpec Support Color(#63B8FF,In Progress)? #1037 #1038 gcf ticket 300
Negative and Boundary


State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.


Test Execution

Assumptions:

Notes:

  • Stitcher currently does not support AM API v3, because the PG AMs that claimed to do V3 were doing it incorrectly, so stitcher is delivered to run AM API V2.
  • Capacity must be specified for scenarios where Utah IG is end-point.

1.0 GENI AM API Functions

The following GENI AM API functions are verified in managing stitching resources using GENI AM API V3. The GCF tool (stitcher.py) negotiates to V2 when an aggregate does not support V3.

1.1 List Resources for aggregate

List resources for the 4 aggregate listed in the assumptions and verify that Advertisement:

  • can pass rspeclint
  • contains expected VLAN information (vlanRangeAvailability, vlanTranslation).

GPO InstaGENI:

$ omni.py listresources -a ig-gpo -V3 -o
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm
INFO:omni:Saving output to a file.
INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm
WARNING:omni:Requested API version 3, but AM https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0 uses version 2. Same aggregate talks API v3 at a different URL: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/3.0
INFO:omni:Switching AM URL to match requested version
INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates.
INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=0290a8d62a7817406203ef2fd86ed99f)
INFO:omni:Writing to 'rspec-instageni-gpolab-bbn-com.xml'
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed listresources:

  Options as run:
		aggregate: ['ig-gpo']
		api_version: 3
		framework: portal
		output: True
		project: ln-prj

  Args: listresources

  Result Summary: Queried resources from 1 of 1 aggregate(s).
Wrote rspecs from 1 aggregate(s) to 1 file(s)
Saved listresources RSpec from 'urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm' (url 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/3.0') to file rspec-instageni-gpolab-bbn-com.xml;  
INFO:omni: ============================================================

$ rspeclint rspec-instageni-gpolab-bbn-com-protogeniv3.xml
Ignoring node rspec_opstate with unknown namespace http://www.geni.net/resources/rspec/ext/opstate/1

$ egrep -i "vlanRangeAvailability|vlanTranslation" rspec-instageni-gpolab-bbn-com-protogeniv3.xml 
                            <vlanRangeAvailability>                    3747-3749                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                            <vlanRangeAvailability>                    2644-2649                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  

Internet2:

$ omni.py listresources -a i2 -V2 -o
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm
INFO:omni:Saving output to a file.
INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm
INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates.
INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm
INFO:omni:Writing to 'rspec-ion-internet2-edu.xml'
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed listresources:

  Options as run:
		aggregate: ['i2']
		framework: portal
		output: True
		project: ln-prj

  Args: listresources

  Result Summary: Queried resources from 1 of 1 aggregate(s).
Wrote rspecs from 1 aggregate(s) to 1 file(s)
Saved listresources RSpec from 'urn:publicid:IDN+ion.internet2.edu+authority+cm' (url 'http://geni-am.net.internet2.edu:12346') to file rspec-ion-internet2-edu.xml;  
INFO:omni: ============================================================

$ rspeclint rspec-ion-internet2-edu.xml
Line 6: Failed validation with root at element: Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}scheduledServices': This element is not expected. Expected is one of ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}scheduledservices, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}negotiatedservices, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}lifetime, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}node, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}port, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}link ).
: stitching

$ egrep -i "vlanRangeAvailability|vlanTranslation" rspec-ion-internet2-edu.xml 
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    3020-3030,3100-3109,3200-3219                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    670,3726-3750                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>            

Utah ProtoGENI:

$ omni.py listresources -a pg-utah -V3 -o
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+emulab.net+authority+cm
INFO:omni:Saving output to a file.
INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+emulab.net+authority+cm
WARNING:omni:Requested API version 3, but AM https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0 uses version 2. Same aggregate talks API v3 at a different URL: https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0
INFO:omni:Switching AM URL to match requested version
INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates.
INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+emulab.net+authority+cm
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=0c869084faca0cc290a5f7f17364933c)
INFO:omni:Writing to 'rspec-emulab-net.xml'
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed listresources:

  Options as run:
		aggregate: ['pg-utah']
		api_version: 3
		framework: portal
		output: True
		project: ln-prj

  Args: listresources

  Result Summary: Queried resources from 1 of 1 aggregate(s).
Wrote rspecs from 1 aggregate(s) to 1 file(s)
Saved listresources RSpec from 'urn:publicid:IDN+emulab.net+authority+cm' (url 'https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0') to file rspec-emulab-net.xml;  
INFO:omni: ============================================================

$ rspeclint rspec-emulab-net.xml 
Ignoring node rspec_opstate with unknown namespace http://www.geni.net/resources/rspec/ext/opstate/1

$ egrep -i "vlanRangeAvailability|vlanTranslation" rspec-emulab-net.xml        
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  

Utah InstaGENI:

$ omni.py listresources -a ig-utah -V3 -o
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Substituting AM nickname ig-utah with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm
INFO:omni:Saving output to a file.
INFO:omni:Substituting AM nickname ig-utah with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm
WARNING:omni:Requested API version 3, but AM https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0 uses version 2. Same aggregate talks API v3 at a different URL: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0
INFO:omni:Switching AM URL to match requested version
INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates.
INFO:omni:Substituting AM nickname ig-utah with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=7ebb578814d5e76b124dbdd2690a75f1)
INFO:omni:Writing to 'rspec-utah-geniracks-net.xml'
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed listresources:

  Options as run:
		aggregate: ['ig-utah']
		api_version: 3
		framework: portal
		output: True
		project: ln-prj

  Args: listresources

  Result Summary: Queried resources from 1 of 1 aggregate(s).
Wrote rspecs from 1 aggregate(s) to 1 file(s)
Saved listresources RSpec from 'urn:publicid:IDN+utah.geniracks.net+authority+cm' (url 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0') to file rspec-utah-geniracks-net.xml;  
INFO:omni: ============================================================

$ rspeclint rspec-utah-geniracks-net.xml         
Ignoring node rspec_opstate with unknown namespace http://www.geni.net/resources/rspec/ext/opstate/1

$ egrep -i "vlanRangeAvailability|vlanTranslation" rspec-utah-geniracks-net.xml 
                            <vlanRangeAvailability>                    256-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  

1.2 Getversion

GPO InstaGENI:

$ omni.py getversion -V3  -a ig-gpo  
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm
INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=9bab7721b01dc44643e4f3fe32fcdfde)
INFO:omni:AM URN: urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm (url: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0) has version: ( (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=9bab7721b01dc44643e4f3fe32fcdfde).)
INFO:omni:{   'code_tag': 'd1e8fd6d3f2f912b0898ee0a90e52ebb3a155aa7',
    'geni_ad_rspec_versions': [   {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.1'},
                                  {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                      'namespace': 'http://www.geni.net/resources/rspec/3',
                                      'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd',
                                      'type': 'GENI',
                                      'version': '3'}],
    'geni_api': 2,
    'geni_api_versions': {   '1': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/1.0',
                             '2': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0',
                             '3': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/3.0'},
    'geni_request_rspec_versions': [   {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '0.1'},
                                       {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '0.2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                           'namespace': 'http://www.geni.net/resources/rspec/3',
                                           'schema': 'http://www.geni.net/resources/rspec/3/request.xsd',
                                           'type': 'GENI',
                                           'version': '3'}],
    'hostname': 'boss.instageni.gpolab.bbn.com',
    'hrn': 'bbninstageni.cm',
    'interface': 'aggregate',
    'url': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am',
    'urn': 'urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm'}
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed getversion:

  Options as run:
		aggregate: ['ig-gpo']
		api_version: 3
		framework: portal
		noGetVersionCache: True
		project: ln-prj

  Args: getversion

  Result Summary: 
Got version for https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
 
INFO:omni: ============================================================

Internet2 Aggregate:

$ omni.py getversion -V3  -a i2    
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm
WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. 
WARNING:omni:Continuing with your requested API version 3, but consider next time calling Omni with '-V2'.
INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm
INFO:omni:AM URN: urn:publicid:IDN+ion.internet2.edu+authority+cm (url: http://geni-am.net.internet2.edu:12346) has version:
INFO:omni:{   'code_tag': '2.0-9',
    'code_url': 'git://git.onelab.eu/sfa.git@sfa-2.0-9',
    'geni_ad_rspec_versions': [   {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/flack/1',
                                                        'http://www.planet-lab.org/resources/sfa/ext/planetlab/1',
                                                        'http://hpn.east.isi.edu/rspec/ext/stitch/0.1/'],
                                      'namespace': 'http://www.geni.net/resources/rspec/3',
                                      'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd',
                                      'type': 'GENI',
                                      'version': '3'}],
    'geni_am_type': ['dcn', 'max'],
    'geni_api': 2,
    'geni_api_versions': {   '2': 'http://geni-am.net.internet2.edu:12346'},
    'geni_request_rspec_versions': [   {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/flack/1',
                                                             'http://www.planet-lab.org/resources/sfa/ext/planetlab/1',
                                                             'http://hpn.east.isi.edu/rspec/ext/stitch/0.1/'],
                                           'namespace': 'http://www.geni.net/resources/rspec/3',
                                           'schema': 'http://www.geni.net/resources/rspec/3/request.xsd',
                                           'type': 'GENI',
                                           'version': '3'}],
    'hostname': 'geni-am.net.internet2.edu',
    'hrn': 'ion.internet2.edu',
    'interface': 'aggregate',
    'sfa': 2,
    'testbed': 'myplc',
    'urn': 'urn:publicid:IDN+ion.internet2.edu+authority+cm'}
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed getversion:

  Options as run:
		aggregate: ['i2']
		api_version: 3
		framework: portal
		noGetVersionCache: True
		project: ln-prj

  Args: getversion

  Result Summary: Your AMs do not all speak requested API v3. At the URLs you are contacting, all your AMs speak AM API v2. Continuing with your requested API version 3, but consider next time calling Omni with '-V2'.
Got version for http://geni-am.net.internet2.edu:12346
 
INFO:omni: ============================================================

Utah ProtoGENI:

$ omni.py getversion -V3  -a pg-utah3
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Substituting AM nickname pg-utah3 with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0, URN urn:publicid:IDN+emulab.net+authority+cm
INFO:omni:Substituting AM nickname pg-utah3 with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0, URN urn:publicid:IDN+emulab.net+authority+cm
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=8459ac1e74947af546d1501471bc6b18)
INFO:omni:AM URN: urn:publicid:IDN+emulab.net+authority+cm (url: https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0) has version: ( (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=8459ac1e74947af546d1501471bc6b18).)
INFO:omni:{   'code_tag': '0a814e9fa25f2335fce9122911946353e70090b6',
    'geni_ad_rspec_versions': [   {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.1'},
                                  {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                      'namespace': 'http://www.geni.net/resources/rspec/3',
                                      'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd',
                                      'type': 'GENI',
                                      'version': '3'}],
    'geni_allocate': 'geni_disjoint',
    'geni_api': 3,
    'geni_api_versions': {   '1': 'https://www.emulab.net:12369/protogeni/xmlrpc/am/1.0',
                             '2': 'https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0',
                             '3': 'https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0'},
    'geni_credential_types': [   {   'geni_type': 'geni_sfa',
                                     'geni_version': '2'},
                                 {   'geni_type': 'geni_sfa',
                                     'geni_version': '3'}],
    'geni_request_rspec_versions': [   {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '0.1'},
                                       {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '0.2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                           'namespace': 'http://www.geni.net/resources/rspec/3',
                                           'schema': 'http://www.geni.net/resources/rspec/3/request.xsd',
                                           'type': 'GENI',
                                           'version': '3'}],
    'geni_single_allocation': '1',
    'hostname': 'boss.emulab.net',
    'hrn': 'utahemulab.cm',
    'interface': 'aggregate',
    'peers': {   'urn:publicid:IDN+ansp.br+authority+cm': 'https://pg-boss.ansp.br:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+attcm.net+authority+cm': 'https://localhost.localdomain/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+chi.itesm.mx+authority+cm': 'https://boss.chi.itesm.mx/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+cis.fiu.edu+authority+cm': 'https://pg-boss.cis.fiu.edu:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+cmcl.cs.cmu.edu+authority+cm': 'https://boss.cmcl.cs.cmu.edu/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+cron.loni.org+authority+cm': 'https://www.cron.loni.org/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+denali.nx+authority+cm': 'https://denali.nmc-probe.org:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+emulab.larc.usp.br+authority+cm': 'https://www.emulab.larc.usp.br:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+emulab.net+authority+cm': 'https://www.emulab.net:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+etri-cm1.kreonet.net+authority+cm': 'https://etri-cm1.kreonet.net/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+etri-cm2.kreonet.net+authority+cm': 'https://etri-cm2.kreonet.net/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+geni.kettering.edu+authority+cm': 'https://boss.geni.kettering.edu:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+genicloud:hplabs+authority+sa': 'https://opencirrus-07501.hpl.hp.com:12346/',
                 'urn:publicid:IDN+genirack.nyu.edu+authority+cm': 'https://boss.genirack.nyu.edu:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+gims.wail.wisc.edu+authority+cm': 'https://gims.wail.wisc.edu/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+host.protogeni-abac.geni.emulab.net+authority+cm': 'https://host.protogeni-abac.geni.emulab.net/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+instageni.arl.hpc.mil+authority+cm': 'https://boss.instageni.arl.hpc.mil:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+instageni.clemson.edu+authority+cm': 'https://boss.instageni.clemson.edu:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+instageni.cs.princeton.edu+authority+cm': 'https://boss.instageni.cs.princeton.edu:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+instageni.ku.gpeni.net+authority+cm': 'https://boss.instageni.ku.gpeni.net:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+instageni.northwestern.edu+authority+cm': 'https://boss.instageni.northwestern.edu:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+instageni.rnoc.gatech.edu+authority+cm': 'https://boss.instageni.rnoc.gatech.edu:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+ion:internet2:edu+authority+sa': 'https://geni-am.net.internet2.edu:12346',
                 'urn:publicid:IDN+jonlab.testbed.emulab.net+authority+cm': 'https://myboss.jonlab.testbed.emulab.net:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+kodiak.nx+authority+cm': 'https://kodiak.nmc-probe.org:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+lan.sdn.uky.edu+authority+cm': 'https://boss.lan.sdn.uky.edu:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+maxpl+authority+sa': 'http://max-myplc.dragon.maxgigapop.net:12346',
                 'urn:publicid:IDN+myelab.testbed.emulab.net+authority+cm': 'https://myboss.myelab.testbed.emulab.net:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+pgeni.gpolab.bbn.com+authority+cm': 'https://www.pgeni.gpolab.bbn.com:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+pgeni1.gpolab.bbn.com+authority+cm': 'https://www.pgeni1.gpolab.bbn.com:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+pgeni3.gpolab.bbn.com+authority+cm': 'https://www.pgeni3.gpolab.bbn.com:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+plc+authority+sa': 'https://planet-lab.org:12346',
                 'urn:publicid:IDN+ple+authority+sa': 'https://www.planet-lab.eu:12346/',
                 'urn:publicid:IDN+pni.uml.edu+authority+cm': 'https://pni.uml.edu/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+portal.nx+authority+cm': 'https://portal.nmc-probe.org:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+schooner.wail.wisc.edu+authority+cm': 'https://www.schooner.wail.wisc.edu/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+shadownet.uky.emulab.net+authority+cm': 'https://shadownet.uky.emulab.net/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+sparta.com+authority+cm': 'https://host.referencecm.amp.emulab.net/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+uky.emulab.net+authority+cm': 'https://www.uky.emulab.net:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+uml.emulab.net+authority+cm': 'https://boss.uml.emulab.net/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+utah.geniracks.net+authority+cm': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+vwall.ilabt.iminds.be+authority+cm': 'https://www.vwall.ilabt.iminds.be:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+wall3.test.ibbt.be+authority+cm': 'https://www.wall3.test.ibbt.be:12369/protogeni/xmlrpc/am',
                 'urn:publicid:IDN+wilab2.ilabt.iminds.be+authority+cm': 'https://www.wilab2.ilabt.iminds.be:12369/protogeni/xmlrpc/am'},
    'url': 'https://www.emulab.net:12369/protogeni/xmlrpc/am',
    'urn': 'urn:publicid:IDN+emulab.net+authority+cm'}
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed getversion:

  Options as run:
		aggregate: ['pg-utah3']
		api_version: 3
		framework: portal
		noGetVersionCache: True
		project: ln-prj

  Args: getversion

  Result Summary: 
Got version for https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0
 
INFO:omni: ============================================================

Utah InstaGENI:

$ omni.py getversion -V3  -a ig-utah3
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Substituting AM nickname ig-utah3 with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm
INFO:omni:Substituting AM nickname ig-utah3 with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=980bc0d09b18c1f378c1d9660fcf31a9)
INFO:omni:AM URN: urn:publicid:IDN+utah.geniracks.net+authority+cm (url: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0) has version: ( (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=980bc0d09b18c1f378c1d9660fcf31a9).)
INFO:omni:{   'code_tag': '5ae9b0b4f055a6d55d372cda4b42f0a339cf0457',
    'geni_ad_rspec_versions': [   {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.1'},
                                  {   'extensions': [],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '0.2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                      'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                      'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd',
                                      'type': 'ProtoGENI',
                                      'version': '2'},
                                  {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                      'namespace': 'http://www.geni.net/resources/rspec/3',
                                      'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd',
                                      'type': 'GENI',
                                      'version': '3'}],
    'geni_allocate': 'geni_disjoint',
    'geni_api': 3,
    'geni_api_versions': {   '1': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/1.0',
                             '2': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0',
                             '3': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0'},
    'geni_credential_types': [   {   'geni_type': 'geni_sfa',
                                     'geni_version': '2'},
                                 {   'geni_type': 'geni_sfa',
                                     'geni_version': '3'}],
    'geni_request_rspec_versions': [   {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.1',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '0.1'},
                                       {   'extensions': [],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/0.2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '0.2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                           'namespace': 'http://www.protogeni.net/resources/rspec/2',
                                           'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd',
                                           'type': 'ProtoGENI',
                                           'version': '2'},
                                       {   'extensions': [   'http://www.protogeni.net/resources/rspec/ext/emulab/1'],
                                           'namespace': 'http://www.geni.net/resources/rspec/3',
                                           'schema': 'http://www.geni.net/resources/rspec/3/request.xsd',
                                           'type': 'GENI',
                                           'version': '3'}],
    'geni_single_allocation': '1',
    'hostname': 'boss.utah.geniracks.net',
    'hrn': 'utahgenirack.cm',
    'interface': 'aggregate',
    'url': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am',
    'urn': 'urn:publicid:IDN+utah.geniracks.net+authority+cm'}
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed getversion:

  Options as run:
		aggregate: ['ig-utah3']
		api_version: 3
		framework: portal
		noGetVersionCache: True
		project: ln-prj

  Args: getversion
  Result Summary: 
Got version for https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0
INFO:omni: ============================================================

1.3 Create Sliver

Using AM API V3 commands, first create a slice and then using stitcher.py create a sliver (allocate, provision, perform operational action start/stop/restart) from GPO InstaGENI to Utah InstaGENI. Create slice:

$ omni.py createslice stitch-gpo-utah  -V3
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Created slice with Name stitch-gpo-utah, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah, Expiration 2013-06-06 21:51:18
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createslice:

  Options as run:
		api_version: 3
		framework: portal
		project: ln-prj

  Args: createslice stitch-gpo-utah

  Result Summary: Created slice with Name stitch-gpo-utah, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah, Expiration 2013-06-06 21:51:18
INFO:omni: ============================================================

Create the sliver using stitch-ig-gpo-ig-utah.rspec:

$ stitcher.py allocate stitch-gpo-utah  -V3 ./stitch-ig-gpo-ig-utah.rspec 
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. 
WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'.
INFO:stitcher:<Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
INFO:stitcher:<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
INFO:stitch.Aggregate:Writing to '/tmp/stitch-gpo-utah-createsliver-request-11-instageni-gpolab-bbn-com.xml'
INFO:stitch.Aggregate:
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/stitch-gpo-utah-createsliver-request-11-instageni-gpolab-bbn-com.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=5ff2ffb474bf4666131c03dc05b55aef)
INFO:omni:Got return from CreateSliver for slice stitch-gpo-utah at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am:
INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-instageni-gpolab-bbn-com-protogeni.xml'
INFO:omni:<!-- Reserved resources for:
	Slice: stitch-gpo-utah
	at AM:
	URN: unspecified_AM_URN
	URL: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
 -->
INFO:omni:Wrote result of createsliver for slice: stitch-gpo-utah at AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-manifest-rspec-instageni-gpolab-bbn-com-protogeni.xml
INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
INFO:stitch.Aggregate:Writing to '/tmp/stitch-gpo-utah-createsliver-request-11-emulab-net.xml'
INFO:stitch.Aggregate:
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/stitch-gpo-utah-createsliver-request-11-emulab-net.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=37b0d042a7c2aefbb95204b6ebb7e099)
INFO:omni:Got return from CreateSliver for slice stitch-gpo-utah at https://www.emulab.net:12369/protogeni/xmlrpc/am:
INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-www-emulab-net-protogeni.xml'
INFO:omni:<!-- Reserved resources for:
	Slice: stitch-gpo-utah
	at AM:
	URN: unspecified_AM_URN
	URL: https://www.emulab.net:12369/protogeni/xmlrpc/am
 -->
INFO:omni:Wrote result of createsliver for slice: stitch-gpo-utah at AM: https://www.emulab.net:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-manifest-rspec-www-emulab-net-protogeni.xml
INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete.
INFO:stitch.Aggregate:Writing to '/tmp/stitch-gpo-utah-createsliver-request-11-ion-internet2-edu.xml'
INFO:stitch.Aggregate:
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/stitch-gpo-utah-createsliver-request-11-ion-internet2-edu.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah
INFO:omni:Got return from CreateSliver for slice stitch-gpo-utah at http://geni-am.net.internet2.edu:12346:
INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-geni-am-net-internet2-edu.xml'
INFO:omni:<!-- Reserved resources for:
	Slice: stitch-gpo-utah
	at AM:
	URN: unspecified_AM_URN
	URL: http://geni-am.net.internet2.edu:12346
 -->
INFO:omni:Wrote result of createsliver for slice: stitch-gpo-utah at AM: http://geni-am.net.internet2.edu:12346 to file stitch-gpo-utah-manifest-rspec-geni-am-net-internet2-edu.xml
INFO:stitch.Aggregate:DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+cm>: must wait for status ready....
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah:
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: changing
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah:
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: changing
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah:
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: changing
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah:
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: changing
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah:
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: ready
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346
INFO:stitch.Aggregate:DCN circuit 18541 is ready
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Saving output to a file.
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Gathering resources reserved for slice stitch-gpo-utah.
INFO:omni:Listed reserved resources on 1 out of 1 possible aggregates.
INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-geni-am-net-internet2-edu.xml'
INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+cm> complete.
INFO:stitch.Aggregate:Writing to '/tmp/stitch-gpo-utah-createsliver-request-11-utah-geniracks-net.xml'
INFO:stitch.Aggregate:
	Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/stitch-gpo-utah-createsliver-request-11-utah-geniracks-net.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=142c1ce3613ea2c56c58681b9432d3b7)
INFO:omni:Got return from CreateSliver for slice stitch-gpo-utah at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am:
INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-utah-geniracks-net-protogeni.xml'
INFO:omni:<!-- Reserved resources for:
	Slice: stitch-gpo-utah
	at AM:
	URN: unspecified_AM_URN
	URL: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
 -->
INFO:omni:Wrote result of createsliver for slice: stitch-gpo-utah at AM: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-manifest-rspec-utah-geniracks-net-protogeni.xml
INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete.
INFO:stitch.launcher:All aggregates are complete.
INFO:stitcher:<?xml version="1.0" ?>
INFO:stitcher:  <!-- Reserved resources for:
	Slice: stitch-gpo-utah
	at AM:
	URN: stitching-combined
	URL: 
 -->
INFO:stitcher:  
<!--
Aggregate Details
{
  "url": "https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am", 
  "hops_info": [
    {
      "path_id": "link", 
      "path_global_id": "ion.internet2.edu-18541", 
      "urn": "urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24", 
      "vlan_tag": "3748", 
      "id": "1"
    }
  ], 
  "urn": "urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm", 
  "user_requested": true, 
  "api_version": 2
}
{
  "url": "http://geni-am.net.internet2.edu:12346", 
  "hops_info": [
    {
      "path_id": "link", 
      "path_global_id": "ion.internet2.edu-18541", 
      "urn": "urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:ge-10/3/2:protogeni", 
      "vlan_tag": "930", 
      "id": "3"
    }, 
    {
      "path_id": "link", 
      "path_global_id": "ion.internet2.edu-18541", 
      "urn": "urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:ae0:bbn", 
      "vlan_tag": "3748", 
      "id": "2"
    }
  ], 
  "urn": "urn:publicid:IDN+ion.internet2.edu+authority+cm", 
  "user_requested": false, 
  "api_version": 2
}
{
  "url": "https://www.emulab.net:12369/protogeni/xmlrpc/am", 
  "hops_info": [
    {
      "path_id": "link", 
      "path_global_id": "ion.internet2.edu-18541", 
      "urn": "urn:publicid:IDN+emulab.net+interface+procurveA:3.19", 
      "vlan_tag": "930", 
      "id": "5"
    }, 
    {
      "path_id": "link", 
      "path_global_id": "ion.internet2.edu-18541", 
      "urn": "urn:publicid:IDN+emulab.net+interface+procurve-pgeni-atla:3.21", 
      "vlan_tag": "930", 
      "id": "4"
    }
  ], 
  "urn": "urn:publicid:IDN+emulab.net+authority+cm", 
  "user_requested": false, 
  "api_version": 2
}
{
  "url": "https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am", 
  "hops_info": [
    {
      "path_id": "link", 
      "path_global_id": "ion.internet2.edu-18541", 
      "urn": "urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19", 
      "vlan_tag": "930", 
      "id": "6"
    }
  ], 
  "urn": "urn:publicid:IDN+utah.geniracks.net+authority+cm", 
  "user_requested": true, 
  "api_version": 2
}
-->
<rspec expires="2013-06-06T21:51:18Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd http://hpn.east.isi.edu/rspec/ext/stitch/0.1/ http://hpn.east.isi.edu/rspec/ext/stitch/0.1/stitch-schema.xsd">
	<node client_id="ig-gpo" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc1" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+5589">
		<sliver_type name="emulab-openvz"/>
		<services>
			<execute command="sudo yum install iperf -y" shell="sh"/>
			<login authentication="ssh-keys" hostname="pc1.instageni.gpolab.bbn.com" port="34362" username="lnevers"/>
		</services>
		<interface client_id="ig-gpo:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc1:eth1" mac_address="02eaa3978ef4" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+5592">
			<ip address="192.168.4.1" netmask="255.255.255.0" type="ipv4"/>
		</interface>
		<rs:vnode name="pcvm1-14" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>
		<host name="ig-gpo.stitch-gpo-utah.ch-geni-net.instageni.gpolab.bbn.com"/>
	</node>
	<node client_id="ig-utah" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc5" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20762">
		<sliver_type name="emulab-openvz"/>
		<services>
			<execute command="sudo yum install iperf -y" shell="sh"/>
			<login authentication="ssh-keys" hostname="pc5.utah.geniracks.net" port="31546" username="lnevers"/>
		</services>
		<interface client_id="ig-utah:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" mac_address="02425aa8f240" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20765">
			<ip address="192.168.4.2" netmask="255.255.255.0" type="ipv4"/>
		</interface>
		<rs:vnode name="pcvm5-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>
		<host name="ig-utah.stitch-gpo-utah.ch-geni-net.utah.geniracks.net"/>
	</node>
	<link client_id="link" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20764" vlantag="930">
		<!--AM urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm: sliver_id=urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+5591 vlantag=3748-->
		<component_manager name="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm"/>
		<component_manager name="urn:publicid:IDN+ion.internet2.edu+authority+cm"/>
		<component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/>
		<component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>
		<interface_ref client_id="ig-gpo:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+5592"/>
		<interface_ref client_id="ig-utah:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20765"/>
		<property capacity="100000" dest_id="ig-utah:if0" source_id="ig-gpo:if0"/>
		<property capacity="100000" dest_id="ig-gpo:if0" source_id="ig-utah:if0"/>
	</link>
	<stitching lastUpdateTime="20130606:06:53:01" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/">
		<path id="link">
			<hop id="1">
				<link id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24">
					<trafficEngineeringMetric>
						10
					</trafficEngineeringMetric>
					<capacity>
						100000
					</capacity>
					<switchingCapabilityDescriptor>
						<switchingcapType>
							l2sc
						</switchingcapType>
						<encodingType>
							ethernet
						</encodingType>
						<switchingCapabilitySpecificInfo>
							<switchingCapabilitySpecificInfo_L2sc>
								<interfaceMTU>
									9000
								</interfaceMTU>
								<vlanRangeAvailability>
									3748
								</vlanRangeAvailability>
								<suggestedVLANRange>
									3748
								</suggestedVLANRange>
								<vlanTranslation>
									false
								</vlanTranslation>
							</switchingCapabilitySpecificInfo_L2sc>
						</switchingCapabilitySpecificInfo>
					</switchingCapabilityDescriptor>
				</link>
				<nextHop>
					2
				</nextHop>
			</hop>
			<hop id="2">
				<link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:ae0:bbn">
					<trafficEngineeringMetric>
            10
					</trafficEngineeringMetric>
					<capacity>
            100000.0
					</capacity>
					<switchingCapabilityDescriptor>
						<switchingcapType>
              l2sc
						</switchingcapType>
						<encodingType>
              ethernet
						</encodingType>
						<switchingCapabilitySpecificInfo>
							<switchingCapabilitySpecificInfo_L2sc>
								<interfaceMTU>
                  9000
								</interfaceMTU>
								<vlanRangeAvailability>
                  3748
								</vlanRangeAvailability>
								<suggestedVLANRange>
                  3748
								</suggestedVLANRange>
								<vlanTranslation>
                  true
								</vlanTranslation>
							</switchingCapabilitySpecificInfo_L2sc>
						</switchingCapabilitySpecificInfo>
					</switchingCapabilityDescriptor>
				</link>
				<nextHop>
          3
				</nextHop>
			</hop>
			<hop id="3">
				<link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:ge-10/3/2:protogeni">
					<trafficEngineeringMetric>
            10
					</trafficEngineeringMetric>
					<capacity>
            100000.0
					</capacity>
					<switchingCapabilityDescriptor>
						<switchingcapType>
              l2sc
						</switchingcapType>
						<encodingType>
              ethernet
						</encodingType>
						<switchingCapabilitySpecificInfo>
							<switchingCapabilitySpecificInfo_L2sc>
								<interfaceMTU>
                  9000
								</interfaceMTU>
								<vlanRangeAvailability>
                  930
								</vlanRangeAvailability>
								<suggestedVLANRange>
                  930
								</suggestedVLANRange>
								<vlanTranslation>
                  true
								</vlanTranslation>
							</switchingCapabilitySpecificInfo_L2sc>
						</switchingCapabilitySpecificInfo>
					</switchingCapabilityDescriptor>
				</link>
				<nextHop>
          4
				</nextHop>
			</hop>
			<hop id="4">
				<link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-atla:3.21">
					<trafficEngineeringMetric>
						10
					</trafficEngineeringMetric>
					<capacity>
						100000
					</capacity>
					<switchingCapabilityDescriptor>
						<switchingcapType>
							l2sc
						</switchingcapType>
						<encodingType>
							ethernet
						</encodingType>
						<switchingCapabilitySpecificInfo>
							<switchingCapabilitySpecificInfo_L2sc>
								<interfaceMTU>
									9000
								</interfaceMTU>
								<vlanRangeAvailability>
									930
								</vlanRangeAvailability>
								<suggestedVLANRange>
									930
								</suggestedVLANRange>
								<vlanTranslation>
									false
								</vlanTranslation>
							</switchingCapabilitySpecificInfo_L2sc>
						</switchingCapabilitySpecificInfo>
					</switchingCapabilityDescriptor>
				</link>
				<nextHop>
					5
				</nextHop>
			</hop>
			<hop id="5">
				<link id="urn:publicid:IDN+emulab.net+interface+procurveA:3.19">
					<trafficEngineeringMetric>
						10
					</trafficEngineeringMetric>
					<capacity>
						100000
					</capacity>
					<switchingCapabilityDescriptor>
						<switchingcapType>
							l2sc
						</switchingcapType>
						<encodingType>
							ethernet
						</encodingType>
						<switchingCapabilitySpecificInfo>
							<switchingCapabilitySpecificInfo_L2sc>
								<interfaceMTU>
									9000
								</interfaceMTU>
								<vlanRangeAvailability>
									930
								</vlanRangeAvailability>
								<suggestedVLANRange>
									930
								</suggestedVLANRange>
								<vlanTranslation>
									false
								</vlanTranslation>
							</switchingCapabilitySpecificInfo_L2sc>
						</switchingCapabilitySpecificInfo>
					</switchingCapabilityDescriptor>
				</link>
				<nextHop>
					6
				</nextHop>
			</hop>
			<hop id="6">
				<link id="urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19">
					<trafficEngineeringMetric>
						10
					</trafficEngineeringMetric>
					<capacity>
						100000
					</capacity>
					<switchingCapabilityDescriptor>
						<switchingcapType>
							l2sc
						</switchingcapType>
						<encodingType>
							ethernet
						</encodingType>
						<switchingCapabilitySpecificInfo>
							<switchingCapabilitySpecificInfo_L2sc>
								<interfaceMTU>
									9000
								</interfaceMTU>
								<vlanRangeAvailability>
									930
								</vlanRangeAvailability>
								<suggestedVLANRange>
									930
								</suggestedVLANRange>
								<vlanTranslation>
									false
								</vlanTranslation>
							</switchingCapabilitySpecificInfo_L2sc>
						</switchingCapabilitySpecificInfo>
					</switchingCapabilityDescriptor>
				</link>
				<nextHop>
					null
				</nextHop>
			</hop>
		</path>
	</stitching>
</rspec>

Stitching success: Reserved resources in slice stitch-gpo-utah at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 link(s).

Note: Could not use V3 provision and poa functions with stitcher.py, slivers were ready after the allocate command.

1.4 List resources for sliver

Could not use describe function with stitcher.py:

$ stitcher.py describe stitch-gpo-utah  -V3 -o
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt
INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm)
INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm)
INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm)
INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm)
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. 
WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'.
ERROR:omni:Describe is only available in AM API v3+. Use ListResources with AM API v2, or specify -V3 to use AM API v3.
Describe is only available in AM API v3+. Use ListResources with AM API v2, or specify -V3 to use AM API v3.

Note: Could not use V3 describe function with stitcher.py.

1.5 Sliver status

Could not use the V3 status command with stitcher.py:

$ stitcher.py status stitch-gpo-utah  -V3 -o 
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt
INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm)
INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm)
INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm)
INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm)
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. 
WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'.
ERROR:omni:Status is only available in AM API v3+. Use SliverStatus with AM API v2, or specify -V3 to use AM API v3.
Status is only available in AM API v3+. Use SliverStatus with AM API v2, or specify -V3 to use AM API v3.

Verify that the slivers are ready with V2:

$ stitcher.py sliverstatus stitch-gpo-utah  -V3 -o                            
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt
INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm)
INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm)
INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm)
INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm)
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. 
WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'.
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah:
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=95d114d26c2ecc2a1acb353f36a8b54c)
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am has overall SliverStatus: ready  <===READY=>
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-instageni-gpolab-bbn-com-protogeni.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=8c06b83db995ee494c7204dabf63d7d6)
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://www.emulab.net:12369/protogeni/xmlrpc/am has overall SliverStatus: ready
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-www-emulab-net-protogeni.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL https://www.emulab.net:12369/protogeni/xmlrpc/am
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=e6785536c17648f68a013a818bc99066)
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am has overall SliverStatus: ready  <===READY===>
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-utah-geniracks-net-protogeni.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: ready
INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json'
INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346
Your AMs do not all speak requested API v3. At the URLs you are contacting, all your AMs speak AM API v2. Switching to AM API v2. Next time call Omni with '-V2'.
Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day(s) on 2013-06-06 21:51:18 UTC
Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am has overall SliverStatus: ready.   <===READY===>
 Saved sliverstatus on stitch-gpo-utah at AM https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-sliverstatus-instageni-gpolab-bbn-com-protogeni.json. 
Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://www.emulab.net:12369/protogeni/xmlrpc/am has overall SliverStatus: ready.
 Saved sliverstatus on stitch-gpo-utah at AM https://www.emulab.net:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-sliverstatus-www-emulab-net-protogeni.json. 
Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am has overall SliverStatus: ready.
 Saved sliverstatus on stitch-gpo-utah at AM https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-sliverstatus-utah-geniracks-net-protogeni.json. 
Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: ready.                          <===READY===>
 Saved sliverstatus on stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 to file stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json. 
Returned status of slivers on 4 of 4 possible aggregates.

Note: Could not use the V3 status command with stitcher.py

1.6 Renew sliver

First slice expiration, renew slice and then sliver:

$ omni.py print_slice_expiration stitch-gpo-utah     
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed print_slice_expiration:

  Options as run:
		framework: portal
		project: ln-prj

  Args: print_slice_expiration stitch-gpo-utah

  Result Summary: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day(s) on 2013-06-06 21:51:18 UTC 
INFO:omni: ============================================================
$ omni.py renewslice  stitch-gpo-utah  2013-06-08
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni.pgch:Requesting new slice expiration '2013-06-08T00:00:00'
INFO:omni:Slice stitch-gpo-utah now expires at 2013-06-08 00:00:00 UTC
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed renewslice:

  Options as run:
		framework: portal
		project: ln-prj

  Args: renewslice stitch-gpo-utah 2013-06-08

  Result Summary: Slice stitch-gpo-utah now expires at 2013-06-08 00:00:00 UTC
Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC 
INFO:omni: ============================================================

Renew sliver:

$ stitcher.py renewsliver  stitch-gpo-utah  2013-06-08
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt
INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm)
INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm)
INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm)
INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm)
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC
INFO:omni:Renewing Sliver stitch-gpo-utah until 2013-06-08 00:00:00+00:00 (UTC)
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=d93863cc6af0506115b11f956b3e55df)
INFO:omni:Renewed sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at unspecified_AM_URN (https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am) until 2013-06-08T00:00:00+00:00 (UTC)
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=95014bab7b39abcdf2f15a1a430f60c4)
INFO:omni:Renewed sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at unspecified_AM_URN++ (https://www.emulab.net:12369/protogeni/xmlrpc/am) until 2013-06-08T00:00:00+00:00 (UTC)
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=f934095065417640b84ee0c0dbd420ba)
INFO:omni:Renewed sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at unspecified_AM_URN+++ (https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am) until 2013-06-08T00:00:00+00:00 (UTC)
INFO:omni:Renewed sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at unspecified_AM_URN+ (http://geni-am.net.internet2.edu:12346) until 2013-06-08T00:00:00+00:00 (UTC)
Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC
Renewed slivers on 4 out of 4 aggregates for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah until 2013-06-08 00:00:00+00:00 (UTC)

1.7 Delete sliver

Could not use V3 delete command:

$ stitcher.py delete stitch-gpo-utah  -V3 
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt
INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm)
INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm)
INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm)
INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm)
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. 
WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'.
ERROR:omni:Delete is only available in AM API v3+. Use DeleteSliver with AM API v2, or specify -V3 to use AM API v3.
Delete is only available in AM API v3+. Use DeleteSliver with AM API v2, or specify -V3 to use AM API v3.

Used V2 deletesliver to delete the sliver:

$ stitcher.py delete stitch-gpo-utah  -V3 
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt
INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm)
INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm)
INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm)
INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm)
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. 
WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'.
ERROR:omni:Delete is only available in AM API v3+. Use DeleteSliver with AM API v2, or specify -V3 to use AM API v3.
Delete is only available in AM API v3+. Use DeleteSliver with AM API v2, or specify -V3 to use AM API v3.
lnevers@arendia:~/gcf-2.3.1/stitch-test$ stitcher.py deletesliver stitch-gpo-utah  -V3 
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt
INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm)
INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm)
INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm)
INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm)
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. 
WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'.
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC
INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=ba61835e4eb1970fa9ffd50721eaf426)
INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah on unspecified_AM_URN at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=add7757854b9583b2e9920845b106071)
INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah on unspecified_AM_URN++ at https://www.emulab.net:12369/protogeni/xmlrpc/am
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=20e7d77cfcd230bacb7911d79c7eb1fe)
INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah on unspecified_AM_URN+++ at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah on unspecified_AM_URN+ at http://geni-am.net.internet2.edu:12346
Your AMs do not all speak requested API v3. At the URLs you are contacting, all your AMs speak AM API v2. Switching to AM API v2. Next time call Omni with '-V2'.
Deleted slivers on 4 out of a possible 4 aggregates

Note: Could not use V3 delete command

1.8 Shutdown Sliver

Ran shutdown on stitched slice ln-ext1:

$ stitcher.py shutdown ln-ext1 
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:Reading stitching slice ln-ext1 aggregates from file ch\.geni\.net.ln-prj.ln-ext1-amlist.txt
INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm)
INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm)
INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm)
INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm)
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 expires within 1 day on 2013-06-07 00:50:54 UTC
ERROR:omni.pgch:Call for Shutdown urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am failed. Server says: <Fault -32600: 'Internal Error executing Shutdown'>
WARNING:omni:Failed to shutdown sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on AM unspecified_AM_URN at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am. <Fault -32600: 'Internal Error executing Shutdown'> (missing result)
ERROR:omni.pgch:Call for Shutdown urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on https://www.emulab.net:12369/protogeni/xmlrpc/am failed. Server says: <Fault -32600: 'Internal Error executing Shutdown'>
WARNING:omni:Failed to shutdown sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on AM unspecified_AM_URN++ at https://www.emulab.net:12369/protogeni/xmlrpc/am. <Fault -32600: 'Internal Error executing Shutdown'> (missing result)
ERROR:omni.pgch:Call for Shutdown urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am failed. Server says: <Fault -32600: 'Internal Error executing Shutdown'>
WARNING:omni:Failed to shutdown sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on AM unspecified_AM_URN+++ at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am. <Fault -32600: 'Internal Error executing Shutdown'> (missing result)
INFO:omni:Shutdown Sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on AM unspecified_AM_URN+ at http://geni-am.net.internet2.edu:12346
Shutdown slivers of slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on 1 of 4 possible aggregates

2.0 GENI RSpec Support

GENI RSpec support tests validate that each of the RSpec (Advertisement, Manifest, and Request) provide complete and accurate information.

The Advertisement RSpec were validated as part of the listresources output validation, not being re-executed here.

The manifest RSpecs generates as part of the create sliver in the functional tests were used for validation.

The GPO InstaGENI manifest:

$ rspeclint stitch-gpo-utah-manifest-rspec-instageni-gpolab-bbn-com-protogeni.xml
Ignoring node rs:vnode with unknown namespace http://www.protogeni.net/resources/rspec/ext/emulab/1
Line 28: Failed validation with root at element: Schemas validity error : Element 
'{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': This element is not expected. 
Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}switchingCapabilityDescriptor ).
Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities':
 This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}
switchingCapabilityDescriptor ).
: stitching

The Internet2 manifest:

$ rspeclint stitch-gpo-utah-manifest-rspec-geni-am-net-internet2-edu.xml 
$

The Utah ProtoGENI manifest:

$ rspeclint stitch-gpo-utah-manifest-rspec-www-emulab-net-protogeni.xml 
Line 28: Failed validation with root at element: Schemas validity error : 
Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': 
This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}
switchingCapabilityDescriptor ).
Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': 
This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}
switchingCapabilityDescriptor ).
: stitching

The InstaGENI Utah manifest:

$ rspeclint stitch-gpo-utah-manifest-rspec-utah-geniracks-net-protogeni.xml 
Ignoring node rs:vnode with unknown namespace http://www.protogeni.net/resources/rspec/ext/emulab/1
Line 28: Failed validation with root at element: Schemas validity error : Element
 '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': This element is not expected. 
Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}switchingCapabilityDescriptor ).
Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': 
This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}switchingCapabilityDescriptor ).
: stitching

2.1 Stitching Extensions

Verified that request RSpec with stitching extension results in an extension being used. The sliver in the functional test was also created with an RSpec that did include the stitching extension. No issues found.

Verified that request RSpec without stitching extension results in an extension being created. The sliver in the functional test did not specify an extension and thus verified that one was created. No issues found.

Verified Stitching Path support for a single point-to-point path path with one stitched slice from Utah InstaGENI to GPO InstaGENI in the functional experiment. Once set up, exchanged traffic between host endpoints. No issues found.

Verified Stitching Path support for multiple point-to-point paths by having 2 concurrent stitched slivers (ln-ext1, ln-ext2) from Utah InstaGENI to GPO InstaGENI. Set up first sliver (ln-ext1) and logged into endpoint hosts to send ping traffic. Left pings running and created the second sliver (ln-ext2). Second sliver started without any problem and started pings between end-points. Left both experiments running for 1 hour. Was able to renew sliver and get sliver status on both experiments.

2.2 Requests RSpec validation

Verified RSpec Versions 3 support by the creation of the sliver in the functional test which used a V3 RSpec. Rspec is attached as stitch-ig-gpo-ig-utah.rspec.

Verified routing profile options by including both an include and and exclude hops, and only exclude VLAN tags as follows:

First determine range to use by getting an Advertisement RSpec at each aggregate. PG Utah and IG Utah were used in this scenario:

IG Utah Advertisement details:

      <node id="urn:publicid:IDN+utah.geniracks.net+node+procurve2">
          <port id="urn:publicid:IDN+utah.geniracks.net+stitchport+procurve2:1.19">
              <capacity>            1000000 </capacity>
              <maximumReservableCapacity> 1000000          </maximumReservableCapacity>
              <minimumReservableCapacity> 1000          </minimumReservableCapacity>
              <link id="urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19">
                  <remoteLinkId> urn:publicid:IDN+emulab.net+interface+procurveA:3.19 </remoteLinkId>
                  <capacity>              1000000 </capacity>
                  <maximumReservableCapacity> 1000000            </maximumReservableCapacity>
                  <minimumReservableCapacity> 1000            </minimumReservableCapacity>
<vlanRangeAvailability> 256-1000 </vlanRangeAvailability>
<vlanTranslation>                    false </vlanTranslation>
              </link>
          </port>
      </node>

PG Utah Advertisement details:

      <node id="urn:publicid:IDN+emulab.net+node+procurveA">
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurveA:3.19">
              <capacity>            1000000 </capacity>
              <maximumReservableCapacity> 1000000          </maximumReservableCapacity>
              <minimumReservableCapacity> 1000          </minimumReservableCapacity>
              <link id="urn:publicid:IDN+emulab.net+interface+procurveA:3.19">
                  <remoteLinkId> urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19 </remoteLinkId>
                  <capacity>              1000000 </capacity>
                  <maximumReservableCapacity> 1000000            </maximumReservableCapacity>
                  <minimumReservableCapacity> 1000            </minimumReservableCapacity>
<vlanRangeAvailability> 750-1000 </vlanRangeAvailability>
<vlanTranslation>                    false </vlanTranslation>
              </link>
          </port>
      </node> 

The PG Utah site uses VLAN Rang 750-1000, so we will exclude part of the range (750-900) and include the IG Utah hop:

$ stitcher.py createsliver ln-excl-incl ./stitch-pg-utah-ig-utah.rspec --includehop urn:publicid:IDN+utah.geniracks.net+stitchport+procurve2:1.19 --excludehop urn:publicid:IDN+emulab.net+stitchport+procurveA:3.19=750-900 
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework pg
INFO:stitcher:<Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
INFO:stitcher:<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
INFO:stitch.Aggregate:Writing to '/tmp/ln-excl-incl-createsliver-request-11-emulab-net.xml'
INFO:stitch.Aggregate:
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln-excl-incl expires on 2013-06-08 17:20:22 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/ln-excl-incl-createsliver-request-11-emulab-net.xml for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln-excl-incl
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=bd5bbddf0d764fb9093b35fd5b5255bb)
INFO:omni:Got return from CreateSliver for slice ln-excl-incl at https://www.emulab.net:12369/protogeni/xmlrpc/am:
INFO:omni:Writing to 'ln-excl-incl-manifest-rspec-www-emulab-net-protogeni.xml'
INFO:omni:<!-- Reserved resources for:
	Slice: ln-excl-incl
	at AM:
	URN: unspecified_AM_URN
	URL: https://www.emulab.net:12369/protogeni/xmlrpc/am
 -->
INFO:omni:Wrote result of createsliver for slice: ln-excl-incl at AM: https://www.emulab.net:12369/protogeni/xmlrpc/am to file ln-excl-incl-manifest-rspec-www-emulab-net-protogeni.xml
INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete.
INFO:stitch.Aggregate:Writing to '/tmp/ln-excl-incl-createsliver-request-11-utah-geniracks-net.xml'
INFO:stitch.Aggregate:
	Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln-excl-incl expires on 2013-06-08 17:20:22 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/ln-excl-incl-createsliver-request-11-utah-geniracks-net.xml for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln-excl-incl
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=25ca5e1193e29ae7962279f2046d6b62)
INFO:omni:Got return from CreateSliver for slice ln-excl-incl at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am:
INFO:omni:Writing to 'ln-excl-incl-manifest-rspec-utah-geniracks-net-protogeni.xml'
INFO:omni:<!-- Reserved resources for:
	Slice: ln-excl-incl
	at AM:
	URN: unspecified_AM_URN
	URL: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
 -->
INFO:omni:Wrote result of createsliver for slice: ln-excl-incl at AM: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am to file ln-excl-incl-manifest-rspec-utah-geniracks-net-protogeni.xml
INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete.
INFO:stitch.launcher:All aggregates are complete.
INFO:stitcher:<?xml version="1.0" ?>
INFO:stitcher:  <!-- Reserved resources for:
	Slice: ln-excl-incl
	at AM:
	URN: stitching-combined
	URL: 
 -->
INFO:stitcher:  
<!--
Aggregate Details
{
  "url": "https://www.emulab.net:12369/protogeni/xmlrpc/am", 
  "hops_info": [
    {
      "path_id": "link", 
      "path_global_id": null, 
      "urn": "urn:publicid:IDN+emulab.net+interface+procurveA:3.19", 
      "vlan_tag": "916", 
      "id": "1"
    }
  ], 
  "urn": "urn:publicid:IDN+emulab.net+authority+cm", 
  "user_requested": true, 
  "api_version": 2
}
{
  "url": "https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am", 
  "hops_info": [
    {
      "path_id": "link", 
      "path_global_id": null, 
      "urn": "urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19", 
      "vlan_tag": "916", 
      "id": "2"
    }
  ], 
  "urn": "urn:publicid:IDN+utah.geniracks.net+authority+cm", 
  "user_requested": true, 
  "api_version": 2
}
-->
<rspec expires="2013-06-08T17:20:22Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd http://hpn.east.isi.edu/rspec/ext/stitch/0.1/ http://hpn.east.isi.edu/rspec/ext/stitch/0.1/stitch-schema.xsd">
	<node client_id="pg-utah" component_id="urn:publicid:IDN+emulab.net+node+pc545" component_manager_id="urn:publicid:IDN+emulab.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+emulab.net+sliver+133280">
		<sliver_type name="emulab-openvz"/>
		<interface client_id="pg-utah:if0" component_id="urn:publicid:IDN+emulab.net+interface+pc545:eth2" mac_address="023abd731f86" sliver_id="urn:publicid:IDN+emulab.net+sliver+133283">
			<ip address="10.22.4.1" netmask="255.255.255.0" type="ipv4"/>
		</interface>
		<rs:vnode name="pcvm545-1" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>
		<host name="pg-utah.ln-excl-incl.pgeni-gpolab-bbn-com.emulab.net"/>
		<services>
			<login authentication="ssh-keys" hostname="pc545.emulab.net" port="33594" username="lnevers"/>
		</services>
	</node>
	<node client_id="ig-utah" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc1" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20833">
		<sliver_type name="emulab-openvz"/>
		<interface client_id="ig-utah:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc1:eth1" mac_address="0209cdfdc524" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20836">
			<ip address="10.22.4.2" netmask="255.255.255.0" type="ipv4"/>
		</interface>
		<rs:vnode name="pcvm1-4" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>
		<host name="ig-utah.ln-excl-incl.pgeni-gpolab-bbn-com.utah.geniracks.net"/>
		<services>
			<login authentication="ssh-keys" hostname="pc1.utah.geniracks.net" port="32314" username="lnevers"/>
		</services>
	</node>
	<link client_id="link" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20835" vlantag="916">
		<!--AM urn:publicid:IDN+emulab.net+authority+cm: sliver_id=urn:publicid:IDN+emulab.net+sliver+133282 vlantag=916-->
		<component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/>
		<component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>
		<interface_ref client_id="pg-utah:if0" component_id="urn:publicid:IDN+emulab.net+interface+pc545:eth2" sliver_id="urn:publicid:IDN+emulab.net+sliver+133283"/>
		<interface_ref client_id="ig-utah:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc1:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20836"/>
		<property dest_id="ig-utah:if0" source_id="pg-utah:if0"/>
		<property dest_id="pg-utah:if0" source_id="ig-utah:if0"/>
	</link>
	<stitching lastUpdateTime="20130607:09:50:43" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/">
		<path id="link">
			<hop id="1">
				<link id="urn:publicid:IDN+emulab.net+interface+procurveA:3.19">
					<trafficEngineeringMetric>
						10
					</trafficEngineeringMetric>
					<capacity>
						100000
					</capacity>
					<switchingCapabilityDescriptor>
						<switchingcapType>
							l2sc
						</switchingcapType>
						<encodingType>
							ethernet
						</encodingType>
						<switchingCapabilitySpecificInfo>
							<switchingCapabilitySpecificInfo_L2sc>
								<interfaceMTU>
									9000
								</interfaceMTU>
								<vlanRangeAvailability>
									916
								</vlanRangeAvailability>
								<suggestedVLANRange>
									916
								</suggestedVLANRange>
								<vlanTranslation>
									false
								</vlanTranslation>
							</switchingCapabilitySpecificInfo_L2sc>
						</switchingCapabilitySpecificInfo>
					</switchingCapabilityDescriptor>
				</link>
				<nextHop>
					2
				</nextHop>
			</hop>
			<hop id="2">
				<link id="urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19">
					<trafficEngineeringMetric>
						10
					</trafficEngineeringMetric>
					<capacity>
						100000
					</capacity>
					<switchingCapabilityDescriptor>
						<switchingcapType>
							l2sc
						</switchingcapType>
						<encodingType>
							ethernet
						</encodingType>
						<switchingCapabilitySpecificInfo>
							<switchingCapabilitySpecificInfo_L2sc>
								<interfaceMTU>
									9000
								</interfaceMTU>
								<vlanRangeAvailability>
									916
								</vlanRangeAvailability>
								<suggestedVLANRange>
									916
								</suggestedVLANRange>
								<vlanTranslation>
									false
								</vlanTranslation>
							</switchingCapabilitySpecificInfo_L2sc>
						</switchingCapabilitySpecificInfo>
					</switchingCapabilityDescriptor>
				</link>
				<nextHop>
					null
				</nextHop>
			</hop>
		</path>
	</stitching>
</rspec>

Stitching success: Reserved resources in slice ln-excl-incl at 2 Aggregates (including 0 intermediate aggregate(s) not in the original request), creating 1 link(s).

The include/excludes hops and VLAN tags were used as requested.

2.3 Bandwidth and VLAN Negotiation

The stitcher tool does not directly negotiate bandwidth. Bandwidth can be requested in the link property element. Some aggregates along the network path may refuse the bandwidth request and allocate some other amount.

VLAN Negotiation is accomplished by the stitcher.py trying to request a VLAN in the available range, and if requested VLAN is not available, then the next VLAN in the range is tried. This is repeated until a requested VLAN is available. Following is a capture that show stitcher going through available range of VLANs:

py createsliver ln-ext-2l ./stitch-ig-gpo-ig-utah-2links-capacity.rspec 
INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config
INFO:stitcher:Using control framework portal
INFO:stitcher:<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
INFO:stitcher:<Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
INFO:stitcher:<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
INFO:stitch.Aggregate:Writing to '/tmp/ln-ext-2l-createsliver-request-11-instageni-gpolab-bbn-com.xml'
INFO:stitch.Aggregate:
        Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l expires within 1 day on 2013-06-07 19:23:37 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/ln-ext-2l-createsliver-request-11-instageni-gpolab-bbn-com.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l
ERROR:omni: {'output': 'vlan tag for link2 not available', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+a73a5adbbee7517a5b08b44c235970a3', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=a73a5adbbee7517a5b08b44c235970a3'}, 'value': 0}
INFO:stitch.Aggregate:Got AMAPIError doing createsliver ln-ext-2l at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag for link2 not available.
INFO:stitch.launcher:Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 2th time with new suggested VLANs
INFO:stitch.launcher:Pausing for 10 seconds for Aggregates to free up resources...


INFO:stitch.Aggregate:Writing to '/tmp/ln-ext-2l-createsliver-request-11-emulab-net.xml'
INFO:stitch.Aggregate:
        Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l expires within 1 day on 2013-06-07 19:23:37 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/ln-ext-2l-createsliver-request-11-emulab-net.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=4357c82f20118d7093a53adcf0af8598)
INFO:omni:Got return from CreateSliver for slice ln-ext-2l at https://www.emulab.net:12369/protogeni/xmlrpc/am:
INFO:omni:Writing to 'ln-ext-2l-manifest-rspec-www-emulab-net-protogeni.xml'
INFO:omni:<!-- Reserved resources for:
        Slice: ln-ext-2l
        at AM:
        URN: unspecified_AM_URN
        URL: https://www.emulab.net:12369/protogeni/xmlrpc/am
 -->
INFO:omni:Wrote result of createsliver for slice: ln-ext-2l at AM: https://www.emulab.net:12369/protogeni/xmlrpc/am to file ln-ext-2l-manifest-rspec-www-emulab-net-protogeni.xml
INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete.
INFO:stitch.Aggregate:Writing to '/tmp/ln-ext-2l-createsliver-request-12-instageni-gpolab-bbn-com.xml'
INFO:stitch.Aggregate:
        Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l expires within 1 day on 2013-06-07 19:23:37 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/ln-ext-2l-createsliver-request-12-instageni-gpolab-bbn-com.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l
ERROR:omni: {'output': 'vlan tag for link2 not available', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+a4afda955fc28fa5c8c95e9b9ba303d0', 'am_type': 'protogeni', 'geni_code': l, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=a4afda955fc28fa5c8c95e9b9ba303d0'}, 'value': 0}
INFO:stitch.Aggregate:Got AMAPIError doing createsliver ln-ext-2l at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag for link2 not available.
INFO:stitch.launcher:Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 3th time with new suggested VLANs
INFO:stitch.launcher:Pausing for 10 seconds for Aggregates to free up resources...


INFO:stitch.Aggregate:Writing to '/tmp/ln-ext-2l-createsliver-request-11-utah-geniracks-net.xml'
INFO:stitch.Aggregate:
        Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l expires within 1 day on 2013-06-07 19:23:37 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/ln-ext-2l-createsliver-request-11-utah-geniracks-net.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=9bd8416e4b9d5eb1c153925cd6b5cd5f)
INFO:omni:Got return from CreateSliver for slice ln-ext-2l at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am:
INFO:omni:Writing to 'ln-ext-2l-manifest-rspec-utah-geniracks-net-protogeni.xml'
INFO:omni:<!-- Reserved resources for:
        Slice: ln-ext-2l
        at AM:
        URN: unspecified_AM_URN
        URL: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
 -->
INFO:omni:Wrote result of createsliver for slice: ln-ext-2l at AM: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am to file ln-ext-2l-manifest-rspec-utah-geniracks-net-protogeni.xml
INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete.
INFO:stitch.Aggregate:Writing to '/tmp/ln-ext-2l-createsliver-request-13-instageni-gpolab-bbn-com.xml'
INFO:stitch.Aggregate:
        Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l expires within 1 day on 2013-06-07 19:23:37 UTC
INFO:omni:Creating sliver(s) from rspec file /tmp/ln-ext-2l-createsliver-request-13-instageni-gpolab-bbn-com.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l
ERROR:omni: {'output': 'vlan tag for link2 not available', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+6bdb7562233197a6ac4626385e34bf91', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=6bdb7562233197a6ac4626385e34bf91'}, 'value': 0}
INFO:stitch.Aggregate:Got AMAPIError doing createsliver ln-ext-2l at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag for link2 not available.
INFO:stitch.Aggregate:Cannot redo request locally: <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24' on path u'link2'> available VLAN range too small: 3747. VLANs unavailable: 3747-3749
WARNING:stitcher:Stitching failed with an error: Stitching failed trying createsliver at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag for link2 not available.
WARNING:stitcher:Had reservation at https://www.emulab.net:12369/protogeni/xmlrpc/am
INFO:stitch.Aggregate:Doing deletesliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l expires within 1 day on 2013-06-07 19:23:37 UTC
INFO:omni.pgch:Detected busy result for DeleteSliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l at https://www.emulab.net:12369/protogeni/xmlrpc/am. Retrying in 10 seconds.
INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=5f4ed7194b73a5327a6c2c24a6d21b5e)
INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l on unspecified_AM_URN at https://www.emulab.net:12369/protogeni/xmlrpc/am
WARNING:stitcher:Deleted reservation at https://www.emulab.net:12369/protogeni/xmlrpc/am
WARNING:stitcher:Had reservation at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
INFO:stitch.Aggregate:Doing deletesliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework portal
INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l expires within 1 day on 2013-06-07 19:23:37 UTC
INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=8a181235b7fa80872551670c62357df9)
INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext-2l on unspecified_AM_URN at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
WARNING:stitcher:Deleted reservation at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
Stitching failed trying createsliver at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag for link2 not available.

2.4 RSpec Input Validation

Tests in this section validated the handling of various RSpec input scenarios. Each planned scenario is captured below:

2.4.1 Request link with only 1 component_manager tag

The following RSpec was used defining only one component_manager for PG Utah and not including the IG Utah component_manager:

...
  <node client_id="pg-utah" component_manager_id="urn:publicid:IDN+emulab.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="pg-utah:if0">
      <ip address="10.22.4.1" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <node client_id="ig-utah" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="ig-utah:if0">
      <ip address="10.22.4.2" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <link client_id="link">
    <component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/>
    <interface_ref client_id="pg-utah:if0"/>
    <interface_ref client_id="ig-utah:if0"/>
    <property source_id="pg-utah:if0" dest_id="ig-utah:if0"/>
    <property source_id="ig-utah:if0" dest_id="pg-utah:if0"/>
  </link>
...

The scenario results in the stitcher evaluating the link and determining that there is no stitching that needs to take place, thus passing the request onto omni.py. Omni exits because the -a argument is not given:

$ rspeclint stitch-1component-tag.rspec
lnevers@arendia:~/gcf-2.4-preview/stitch-test/rspec-input$ omni.py createslice ln-stitch1
09:36:40 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
09:36:40 INFO     omni: Using control framework pg
09:36:41 INFO     omni: Created slice with Name ln-stitch1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln-stitch1, Expiration 2013-06-11 14:36:41+00:00
09:36:41 INFO     omni:  ------------------------------------------------------------
09:36:41 INFO     omni:  Completed createslice:
  Options as run:
		framework: pg
  Args: createslice ln-stitch1
  Result Summary: Created slice with Name ln-stitch1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln-stitch1, Expiration 2013-06-11 14:36:41+00:00
09:36:41 INFO     omni:  ============================================================

$ stitcher.py createsliver ln-stitch1 ./stitch-1component-tag.rspec 09:37:52 INFO stitcher: Loading config file /home/lnevers/.gcf/omni_config 09:37:52 INFO stitcher: Using control framework pg 09:37:52 INFO omni: Loading config file /home/lnevers/.gcf/omni_config 09:37:52 INFO omni: Using control framework pg 09:38:01 ERROR omni.protogeni: Call for Test PG AM for GENI API compatibilitity at https://www.schooner.wail.wisc.edu/protogeni/xmlrpc/am failed.: ProtocolError: <ProtocolError for www.schooner.wail.wisc.edu/protogeni/xmlrpc/am: 403 Forbidden> 09:38:01 ERROR omni.protogeni: ..... Run with --debug for more information 09:38:21 ERROR omni.protogeni: Call for Test PG AM for GENI API compatibilitity at https://pg-boss.ansp.br:12369/protogeni/xmlrpc/am failed.: Unknown socket error: [Errno 113] No route to host 09:38:21 ERROR omni.protogeni: ..... Run with --debug for more information 09:38:43 ERROR omni.protogeni: Call for Test PG AM for GENI API compatibilitity at https://opencirrus-07501.hpl.hp.com:12346/ failed.: Unknown SSL error The read operation timed out 09:38:43 ERROR omni.protogeni: ..... Run with --debug for more information 09:38:53 ERROR omni: Missing -a argument: specify an aggregate where you want the reservation. Missing -a argument: specify an aggregate where you want the reservation. }}}

2.4.2 Request link with 2 interface_ref elements but no component_manager elements

The following RSpec was used defining only no component_manager for either aggregate associated with the link:

...
  <node client_id="pg-utah" component_manager_id="urn:publicid:IDN+emulab.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="pg-utah:if0">
      <ip address="10.22.4.1" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <node client_id="ig-utah" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="ig-utah:if0">
      <ip address="10.22.4.2" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <link client_id="link">
    <interface_ref client_id="pg-utah:if0"/>
    <interface_ref client_id="ig-utah:if0"/>
    <property source_id="pg-utah:if0" dest_id="ig-utah:if0"/>
    <property source_id="ig-utah:if0" dest_id="pg-utah:if0"/>
  </link>
...

The test shows the same failure as the previous scenario, due to stitcher evaluating the link, determining that the request is not a stitching scenario due to the lack on component managers in the link definition, and handing off the request to omny which fails due to the missing aggregate "-a" argument.

$ stitcher.py createsliver ln-stitch1 ./stitch-2if-ref-no-comp-mgr.rspec 
09:55:55 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
09:55:55 INFO     stitcher: Using control framework pg
09:55:55 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
09:55:55 INFO     omni: Using control framework pg
09:56:03 ERROR    omni.protogeni: Call for Test PG AM for GENI API compatibilitity at https://www.schooner.wail.wisc.edu/protogeni/xmlrpc/am failed.: ProtocolError: <ProtocolError for www.schooner.wail.wisc.edu/protogeni/xmlrpc/am: 403 Forbidden>
09:56:03 ERROR    omni.protogeni:     ..... Run with --debug for more information
09:56:21 ERROR    omni.protogeni: Call for Test PG AM for GENI API compatibilitity at https://pg-boss.ansp.br:12369/protogeni/xmlrpc/am failed.: Unknown socket error: [Errno 113] No route to host
09:56:21 ERROR    omni.protogeni:     ..... Run with --debug for more information
09:56:44 ERROR    omni.protogeni: Call for Test PG AM for GENI API compatibilitity at https://opencirrus-07501.hpl.hp.com:12346/ failed.: Unknown SSL error The read operation timed out
09:56:44 ERROR    omni.protogeni:     ..... Run with --debug for more information
09:56:52 ERROR    omni: Missing -a argument: specify an aggregate where you want the reservation.
Missing -a argument: specify an aggregate where you want the reservation.

2.4.3 Request link with 2 local interface_ref elements and 1 remote interface_ref element

In this scenario one VM has two interfaces on the same network as a remote which only has one interface. The RSpec:

...
  <node client_id="pg-utah" component_manager_id="urn:publicid:IDN+emulab.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="pg-utah:if0">
      <ip address="10.22.4.1" netmask="255.255.255.0" type="ipv4"/>
    </interface>
    <interface client_id="pg-utah:if1">
      <ip address="10.22.4.3" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <node client_id="ig-utah" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="ig-utah:if0">
      <ip address="10.22.4.2" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <link client_id="link">
    <component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/>
    <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>
    <interface_ref client_id="pg-utah:if0"/>
    <interface_ref client_id="pg-utah:if1"/>
    <interface_ref client_id="ig-utah:if0"/>
    <property source_id="pg-utah:if0" dest_id="ig-utah:if0"/>
    <property source_id="ig-utah:if0" dest_id="pg-utah:if0"/>
    <property source_id="pg-utah:if1" dest_id="ig-utah:if0"/>
    <property source_id="ig-utah:if0" dest_id="pg-utah:if1"/>
    <property source_id="pg-utah:if1" dest_id="pg-utah:if0"/>
    <property source_id="pg-utah:if0" dest_id="pg-utah:if1"/>
  </link>
....

Using the rspec above RSpec results in a

$ omni.py createslice lnstitcha 
10:49:20 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
10:49:20 INFO     omni: Using control framework pg
10:49:22 INFO     omni: Created slice with Name lnstitcha, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+lnstitcha, Expiration 2013-06-11 15:49:22+00:00
10:49:22 INFO     omni:  ------------------------------------------------------------
10:49:22 INFO     omni:  Completed createslice:
  Options as run:
		framework: pg
  Args: createslice lnstitcha
  Result Summary: Created slice with Name lnstitcha, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+lnstitcha, Expiration 2013-06-11 15:49:22+00:00
10:49:22 INFO     omni:  ============================================================

$ rspeclint stitch-2if-local-rem-if-ref.rspec 

$ stitcher.py createsliver lnstitcha ./stitch-2if-local-rem-if-ref.rspec 
10:54:21 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
10:54:21 INFO     stitcher: Using control framework pg
StitchingServiceFailedError: Error from Stitching Service: code 1: GeniRSpec::
CreateApiRequestMessage - no stitching path or multi-aggregate link in request RSpec.

2.4.4 Request link with an interface_ref whose client_id is not the ID for any interface in the RSpec

An RSpec that has interface_ref that use client_ids not in the interfaces defined in the RSpec was defined, which looks as follows:

...
  <node client_id="pg-utah" component_manager_id="urn:publicid:IDN+emulab.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="pg-utah:if0">
      <ip address="10.22.4.1" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <node client_id="ig-utah" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="ig-utah:if0">
      <ip address="10.22.4.2" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <link client_id="link">
    <component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/>
    <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>
    <interface_ref client_id="ypg-utah:if0"/>
    <interface_ref client_id="xig-utah:if0"/>
    <property source_id="ypg-utah:if0" dest_id="xig-utah:if0"/>
    <property source_id="xig-utah:if0" dest_id="ypg-utah:if0"/>
  </link>
...

Created a slice and tried to stitch a sliver:

$ rspeclint stitch-mismatch-if-ref-cl-id.rspec 
$ omni.py createslice lnst
11:03:50 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
11:03:50 INFO     omni: Using control framework pg
11:03:52 INFO     omni: Created slice with Name lnst, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+lnst, Expiration 2013-06-11 16:03:52+00:00
11:03:52 INFO     omni:  ------------------------------------------------------------
11:03:52 INFO     omni:  Completed createslice:
  Options as run:
		framework: pg
  Args: createslice lnst
  Result Summary: Created slice with Name lnst, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+lnst, Expiration 2013-06-11 16:03:52+00:00
11:03:52 INFO     omni:  ============================================================

$ stitcher.py createsliver lnst ./stitch-mismatch-if-ref-cl-id.rspec 
11:04:31 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
11:04:31 INFO     stitcher: Using control framework pg
StitchingServiceFailedError: Error from Stitching Service: code 1: GeniRSpec::
CreateApiRequestMessage - no stitching path or multi-aggregate link in request RSpec.

2.4.5 Request stitching extension with a path that has 0 hops

Created a request RSpec that meets that defines a 0 hop scenario from PG Utah to PG Utah:

...
  <node client_id="pg-utah" component_manager_id="urn:publicid:IDN+emulab.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="pg-utah:if0">
      <ip address="10.22.4.1" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <node client_id="pg-utah" component_manager_id="urn:publicid:IDN+emulab.net+authority+cm" exclusive="false">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="pg-utah2:if0">
      <ip address="10.22.4.2" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <link client_id="link">
    <component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/>
    <component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/>
    <interface_ref client_id="pg-utah:if0"/>
    <interface_ref client_id="pg-utah2:if0"/>
    <property source_id="pg-utah:if0" dest_id="pg-utah2:if0"/>
    <property source_id="pg-utah2:if0" dest_id="pg-utah:if0"/>
  </link>
...

Created the slice and then a sliver:

$ rspeclint stitch-0hop.rspec
$ omni.py createslice 0hop
11:09:23 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
11:09:23 INFO     omni: Using control framework pg
11:09:24 INFO     omni: Created slice with Name 0hop, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+0hop, Expiration 2013-06-11 16:09:24+00:00
11:09:24 INFO     omni:  ------------------------------------------------------------
11:09:24 INFO     omni:  Completed createslice:
  Options as run:
		framework: pg
  Args: createslice 0hop
  Result Summary: Created slice with Name 0hop, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+0hop, Expiration 2013-06-11 16:09:24+00:00
11:09:24 INFO     omni:  ============================================================
lnevers@arendia:~/gcf-2.4-preview/stitch-test/rspec-input$ stitcher.py createsliver 0hop ./stitch-0hop.rspec 
11:09:40 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
11:09:40 INFO     stitcher: Using control framework pg
StitchingServiceFailedError: Error from Stitching Service: code 1: GeniRSpec::
CreateApiRequestMessage - no stitching path or multi-aggregate link in request RSpec.
$ 

Note: gcf ticket 300 captures the defect, Stitcher should recognize that this is not a stitching scenario.

2.4.6 Request capacity that is below minimum and above maximum reservable Capacity

This scenario should be run for each stitching aggregate. First scenario includes InstaGENI Utah who define the following capacity: a) minimumReservableCapacity = 1000 and b) maximumReservableCapacity = 1000000

=> a. Requesting capacity 666 below minimum reservable capacity of 1000 The following link definition was used:

...
  <link client_id="link">
    <component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/>
    <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>
    <interface_ref client_id="pg-utah:if0"/>
    <interface_ref client_id="ig-utah:if0"/>
    <property source_id="pg-utah:if0" dest_id="ig-utah:if0" capacity="666"/>
    <property source_id="ig-utah:if0" dest_id="pg-utah:if0" capacity="666"/>
  </link>
...

The stitcher createsliver

=> b. Requesting capacity 1999999 above maximum reservable capacity of 1000000

}}}}

The stitcher createsliver
{{{
$ stitcher.py createsliver ln1999999 ./stitch-capacity-1999999.rspec 
12:31:11 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
12:31:11 INFO     stitcher: Using control framework pg
12:31:14 INFO     stitcher: <Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
12:31:14 INFO     stitcher: <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
12:31:14 INFO     stitch.Aggregate: Writing to '/tmp/ln1999999-createsliver-request-11-emulab-net.xml'
12:31:14 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
12:31:14 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
12:31:14 INFO     omni: Using control framework pg
12:31:15 INFO     omni: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln1999999 expires on 2013-06-11 17:30:45 UTC
12:31:15 INFO     omni: Creating sliver(s) from rspec file /tmp/ln1999999-createsliver-request-11-emulab-net.xml for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln1999999
12:32:14 ERROR    omni:  {'output': '*** ERROR: mapper: Reached run limit. Giving up.\nseed = 1370903756\nPhysical Graph: 276\nCalculating shortest paths on switch fabric.\nVirtual Graph: 2\nGenerating physical equivalence classes:204\nType precheck:\nType precheck passed.\nNode mapping precheck:\nNode mapping precheck succeeded\nPolicy precheck:\nPolicy precheck succeeded\nAnnealing.\nAdjusting dificulty estimate for fixed nodes, 1 remain.\nDoing melting run\nReverting: forced\nReverting to best solution\nDone\n   BEST SCORE:  4.6 in 16840 iters and 0.493181 seconds\nWith 1 violations\nIters to find best score:  12\nViolations: 1\n  unassigned:  0\n  pnode_load:  0\n  no_connect:  1\n  link_users:  0\n  bandwidth:   0\n  desires:     0\n  vclass:      0\n  delay:       0\n  trivial mix: 0\n  subnodes:    0\n  max_types:   0\n  endpoints:   0\nNodes:\nig-utah interconnect-instageni\npg-utah pc411\nEnd Nodes\nEdges:\nlinksimple/link/pg-utah:0,ig-utah:0 Mapping Failed\nEnd Edges\nEnd solution\nSummary:\ninterconnect-instageni 1 vnodes, 0 nontrivial BW, 0 trivial BW, type=interconnect-vm\n    ?+ram: used=128 total=0\n    ?+cpupercent: used=0 total=92\n    ?+rampercent: used=0 total=80\npc411 1 vnodes, 0 nontrivial BW, 0 trivial BW, type=pcvm\n    ?+cpu: used=0 total=2400\n    ?+ram: used=128 total=11008\n    ?+cpupercent: used=0 total=92\n    ?+rampercent: used=0 total=80\nTotal physical nodes used: 2\nEnd summary\nASSIGN FAILED:\nType precheck passed.\nNode mapping precheck succeeded\nPolicy precheck succeeded\nAnnealing.\nAdjusting dificulty estimate for fixed nodes, 1 remain.\nDoing melting run\nReverting: forced\nReverting to best solution\nDone\n   BEST SCORE:  4.6 in 16840 iters and 0.493181 seconds\n  unassigned:  0\n  pnode_load:  0\n  no_connect:  1\n  link_users:  0\n  bandwidth:   0\n  desires:     0\n  vclass:      0\n  delay:       0\n  trivial mix: 0\n  subnodes:    0\n  max_types:   0\n  endpoints:   0\n', 'code': {'protogeni_error_log': 'urn:publicid:IDN+emulab.net+log+8d0e01debe2f270931c7ba281ccf80c8', 'am_type': 'protogeni', 'geni_code': 2, 'am_code': 2, 'protogeni_error_url': 'https://www.emulab.net/spewlogfile.php3?logfile=8d0e01debe2f270931c7ba281ccf80c8'}, 'value': 'Could not map to resources'}
12:32:14 INFO     stitch.Aggregate: Got AMAPIError doing createsliver ln1999999 at <Aggregate urn:publicid:IDN+emulab.net+authority+cm>: AMAPIError: Error from Aggregate: code 2. protogeni AM code: 2: *** ERROR: mapper: Reached run limit. Giving up.
seed = 1370903756
Physical Graph: 276
Calculating shortest paths on switch fabric.
Virtual Graph: 2
Generating physical equivalence classes:204
Type precheck:
Type precheck passed.
Node mapping precheck:
Node mapping precheck succeeded
Policy precheck:
Policy precheck succeeded
Annealing.
Adjusting dificulty estimate for fixed nodes, 1 remain.
Doing melting run
Reverting: forced
Reverting to best solution
Done
   BEST SCORE:  4.6 in 16840 iters and 0.493181 seconds
With 1 violations
Iters to find best score:  12
Violations: 1
  unassigned:  0
  pnode_load:  0
  no_connect:  1
  link_users:  0
  bandwidth:   0
  desires:     0
  vclass:      0
  delay:       0
  trivial mix: 0
  subnodes:    0
  max_types:   0
  endpoints:   0
Nodes:
ig-utah interconnect-instageni
pg-utah pc411
End Nodes
Edges:
linksimple/link/pg-utah:0,ig-utah:0 Mapping Failed
End Edges
End solution
Summary:
interconnect-instageni 1 vnodes, 0 nontrivial BW, 0 trivial BW, type=interconnect-vm
    ?+ram: used=128 total=0
    ?+cpupercent: used=0 total=92
    ?+rampercent: used=0 total=80
pc411 1 vnodes, 0 nontrivial BW, 0 trivial BW, type=pcvm
    ?+cpu: used=0 total=2400
    ?+ram: used=128 total=11008
    ?+cpupercent: used=0 total=92
    ?+rampercent: used=0 total=80
Total physical nodes used: 2
End summary
ASSIGN FAILED:
Type precheck passed.
Node mapping precheck succeeded
Policy precheck succeeded
Annealing.
Adjusting dificulty estimate for fixed nodes, 1 remain.
Doing melting run
Reverting: forced
Reverting to best solution
Done
   BEST SCORE:  4.6 in 16840 iters and 0.493181 seconds
  unassigned:  0
  pnode_load:  0
  no_connect:  1
  link_users:  0
  bandwidth:   0
  desires:     0
  vclass:      0
  delay:       0
  trivial mix: 0
  subnodes:    0
  max_types:   0
  endpoints:   0
.
12:32:14 WARNING  stitcher: Stitching failed but will retry: Circuit reservation failed at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> (AMAPIError: Error from Aggregate: code 2. protogeni AM code: 2: *** ERROR: mapper: Reached run limit. Giving up.
seed = 1370903756
Physical Graph: 276
Calculating shortest paths on switch fabric.
Virtual Graph: 2
Generating physical equivalence classes:204
Type precheck:
Type precheck passed.
Node mapping precheck:
Node mapping precheck succeeded
Policy precheck:
Policy precheck succeeded
Annealing.
Adjusting dificulty estimate for fixed nodes, 1 remain.
Doing melting run
Reverting: forced
Reverting to best solution
Done
   BEST SCORE:  4.6 in 16840 iters and 0.493181 seconds
With 1 violations
Iters to find best score:  12
Violations: 1
  unassigned:  0
  pnode_load:  0
  no_connect:  1
  link_users:  0
  bandwidth:   0
  desires:     0
  vclass:      0
  delay:       0
  trivial mix: 0
  subnodes:    0
  max_types:   0
  endpoints:   0
Nodes:
ig-utah interconnect-instageni
pg-utah pc411
End Nodes
Edges:
linksimple/link/pg-utah:0,ig-utah:0 Mapping Failed
End Edges
End solution
Summary:
interconnect-instageni 1 vnodes, 0 nontrivial BW, 0 trivial BW, type=interconnect-vm
    ?+ram: used=128 total=0
    ?+cpupercent: used=0 total=92
    ?+rampercent: used=0 total=80
pc411 1 vnodes, 0 nontrivial BW, 0 trivial BW, type=pcvm
    ?+cpu: used=0 total=2400
    ?+ram: used=128 total=11008
    ?+cpupercent: used=0 total=92
    ?+rampercent: used=0 total=80
Total physical nodes used: 2
End summary
ASSIGN FAILED:
Type precheck passed.
Node mapping precheck succeeded
Policy precheck succeeded
Annealing.
Adjusting dificulty estimate for fixed nodes, 1 remain.
Doing melting run
Reverting: forced
Reverting to best solution
Done
   BEST SCORE:  4.6 in 16840 iters and 0.493181 seconds
  unassigned:  0
  pnode_load:  0
  no_connect:  1
  link_users:  0
  bandwidth:   0
  desires:     0
  vclass:      0
  delay:       0
  trivial mix: 0
  subnodes:    0
  max_types:   0
  endpoints:   0
.). Try again from the SCS
12:32:14 INFO     stitcher: Pausing for 30 seconds for Aggregates to free up resources...


12:32:44 INFO     stitcher: Calling SCS for the 2th time...
12:32:44 INFO     stitch.Aggregate: Writing to '/tmp/ln1999999-createsliver-request-21-emulab-net.xml'
12:32:44 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
12:32:44 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
12:32:44 INFO     omni: Using control framework pg
12:32:46 INFO     omni: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln1999999 expires on 2013-06-11 17:30:45 UTC
12:32:46 INFO     omni: Creating sliver(s) from rspec file /tmp/ln1999999-createsliver-request-21-emulab-net.xml for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ln1999999
...
<<<<STITCHER CONTINUED TO RUN AN attempt this invalid request.>>>

}}}



==== 2.4.7 Invalid Path input - Invalid Routing profiles  ====

(not sure what this is and how to do it ?)

=== 2.4.8  Invalid Path input - Include/exclude invalid VLANs ===


 
=== 2.5 Advertisement RSpecs ===

Advertisement RSpecs were reviewed to verify that they accurately capture the following for each of the aggregates:
 - Stitching elements (nodes, ports, links, capacity)
 - VLAN IDs and their availability
 - VLAN Bandwidth capability

Information  from the GPO InstaGENI Advertisement RSpec:
{{{
$ egrep -i "node|port|link|capacity|vlanrange|translation" rspec-instageni-gpolab-bbn-com.xml
....
....

     <node id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+procurve2">        
          <port id="urn:publicid:IDN+instageni.gpolab.bbn.com+stitchport+procurve2:5.24">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:ae0:bbn            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    3747-3749                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+procurve2">        
          <port id="urn:publicid:IDN+instageni.gpolab.bbn.com+stitchport+procurve2:5.24">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24">            
                  <remoteLinkId>              urn:publicid:IDN+NLR+interface+BBNIFACE            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    2644-2649                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
}}}

Information  from the Internet2 Advertisement RSpec:
{{{
$ egrep -i "node|port|link|capacity|vlanrange|translation" rspec-ion-internet2-edu.xml 
      <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.kans">        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.kans:ge-10/2/9">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.kans:ge-10/2/9:protogeni">            
                  <remoteLinkId>              urn:publicid:IDN+emulab.net+node+procurve-pgeni-kans:3.12            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.kans:*">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.kans:*:*">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+*:*:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.wash">        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.wash:ge-10/3/1">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:ge-10/3/1:protogeni">            
                  <remoteLinkId>              urn:publicid:IDN+emulab.net+interface+procurve-pgeni-wash:1.24            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.wash:*">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:*:*">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+*:*:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.losa">        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.losa:ge-10/3/0">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.losa:ge-10/3/0:protogeni">            
                  <remoteLinkId>              urn:publicid:IDN+emulab.net+interface+procurve-pgeni-losa:3.31            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.losa:*">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.losa:*:*">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+*:*:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.hous">        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.hous:ge-9/1/4">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:ge-9/1/4:protogeni">            
                  <remoteLinkId>              urn:publicid:IDN+emulab.net+interface+procurve-pgeni-hous:3.24            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.hous:xe-7/1/0">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:xe-7/1/0:*">            
                  <remoteLinkId>              urn:publicid:IDN+loni.org+interface+loni-dcn-e1:0-1-4:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.hous:*">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:*:*">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+*:*:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.atla">        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.atla:ge-10/3/2">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:ge-10/3/2:protogeni">            
                  <remoteLinkId>              urn:publicid:IDN+emulab.net+interface+procurve-pgeni-atla:3.21            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.atla:xe-0/1/3">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:xe-0/1/3:*">            
                  <remoteLinkId>              urn:publicid:IDN+*+interface+*:*:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.atla:*">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:*:*">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+*:*:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.salt">        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.salt:ge-10/2/7">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.salt:ge-10/2/7:protogeni">            
                  <remoteLinkId>              urn:publicid:IDN+emulab.net+interface+procurve-pgeni-salt:3.21            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.salt:*">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.salt:*:*">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+*:*:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.newy">        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.newy:xe-0/1/1">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:xe-0/1/1:*">            
                  <remoteLinkId>              urn:publicid:IDN+dragon.maxgigapop.net+interface+clpk:1/2/3:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    3020-3030,3100-3109,3200-3219                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.newy:ae0">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:ae0:bbn">            
                  <remoteLinkId>              urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    670,3726-3750                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
          <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.newy:*">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:*:*">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+*:*:*            </remoteLinkId>            
                  <capacity>              10000000            </capacity>            
                  <maximumReservableCapacity>              10000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                             <vlanRangeAvailability>                    2-4094                  </vlanRangeAvailability>                  
                             <vlanTranslation>                    true                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>
}}}
Information  from the Utah ProtoGENI Advertisement RSpec:
{{{
$ egrep -i "node|port|link|capacity|vlanrange|translation" rspec-emulab-net.xml 
....
....
  </link>  
      <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-losa">        
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-losa:3.21">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-losa:3.21">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.losa:ge-10/3/0:protogeni            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-atla">        
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-atla:3.21">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-atla:3.21">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:ge-10/3/2:protogeni            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+emulab.net+node+procurveA">        
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurveA:3.19">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+emulab.net+interface+procurveA:3.19">            
                  <remoteLinkId>              urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-kans">        
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-kans:3.21">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-kans:3.21">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.kans:ge-10/2/9:protogeni            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-kans">        
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-kans:3.12">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-kans:3.12">            
                  <remoteLinkId>              urn:publicid:IDN+gpeni+interface+bbg1.gpeni            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-salt">        
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-salt:3.21">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-salt:3.21">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.salt:ge-10/2/7:protogeni            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-wash">        
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-wash:1.24">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-wash:1.24">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:ge-10/3/1:protogeni            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>      
      <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-hous">        
          <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-hous:3.24">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-hous:3.24">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:ge-9/1/4:protogeni            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    750-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node>   
}}}

Information from the Utah InstaGENI Advertisement RSpec:
{{{
$ egrep -i "node|port|link|capacity|vlanrange|translation" rspec-utah-geniracks-net.xml 
....
....
      <node id="urn:publicid:IDN+utah.geniracks.net+node+procurve2">        
          <port id="urn:publicid:IDN+utah.geniracks.net+stitchport+procurve2:1.19">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <link id="urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19">            
                  <remoteLinkId>              urn:publicid:IDN+emulab.net+interface+procurveA:3.19            </remoteLinkId>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                            <vlanRangeAvailability>                    256-1000                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
              </link>          
          </port>        
      </node> 
}}}


== 3.0 Negative and Boundary tests ==

This is a starting list of scenarios that will validate negative and boundary conditions:
 - At ION, InstaGENI and ExoGENI, allocate resources that are not advertised, verify failure.
 - At ION, InstaGENI and ExoGENI, allocate VLAN tags that are already in use, verify failure.
 - Kill an ION circuit manually, verify recovery and logging of event.
 - Request a VLAN that is already in use, verify handling.
 - Create a request race condition where two slices (Slice1 and Slice2) request the same resources (AM1 <->VLAN1<->AM2), but Slice1 gets VLAN1 at AM1 and Slice2 gets VLAN1 at AM2. Verify results tools handle the results and properly handle resources.
 - Pseudo Loop Scenario:  Request PG Utah to ION to IG GPO. Then request a 2nd interface at PG Utah node to ION to same interface on same node at IG GPO.  If that fails, then request a 2nd interface on that node at IG GPO - that should work.

Attachments (1)

Download all attachments as: .zip