Version 39 (modified by 11 years ago) (diff) | ,
---|
Stitching Functional Tests
This page captures status and execution details for the Stitching Functional tests. For overall status see the GENI Network Stitching Test Status page and for test details see the GENI Network Stitching Test Plan page.
Last update: 06/06/13
Function | State | Ticket | Comments |
GENI AM API Functions | Color(yellow,Complete)? | #1031 #1036 #1039 #1040 #1043 | |
RSpec Support | Color(#63B8FF,In Progress)? | #1037 #1038 | |
Negative and Boundary |
State Legend | Description |
Color(green,Pass)? | Test completed and met all criteria |
Color(#98FB98,Pass: most criteria)? | Test completed and met most criteria. Exceptions documented |
Color(red,Fail)? | Test completed and failed to meet criteria. |
Color(yellow,Complete)? | Test completed but will require re-execution due to expected changes |
Color(orange,Blocked)? | Blocked by ticketed issue(s). |
Color(#63B8FF,In Progress)? | Currently under test. |
Test Execution
Assumptions:
- It is expected that aggregates will not support GENI AM API V3 before GEC17, and that the GCF tool (stitcher.py) will negotiate to GENI AM API V2.
- Both GENI portal credential and pgeni.gpolab.bbn.com credentials are used throughout.
- All tests in this page are executed using a stitched sliver from IG GPO to IG Utah, which includes the following aggregates:
- GPO InstaGENI - https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
- Internet2/ION - http://geni-am.net.internet2.edu:12346
- Utah PG - https://www.emulab.net:12369/protogeni/xmlrpc/am
- Utah InstaGENI - https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
Notes:
- Stitcher currently does not support AM API v3, because the PG AMs that claimed to do V3 were doing it incorrectly, so stitcher is delivered to run AM API V2.
- Capacity must be specified for scenarios where Utah IG is end-point.
GENI AM API Functions
The following GENI AM API functions are verified in managing stitching resources using GENI AM API V3. The GCF tool (stitcher.py) negotiates to V2 when an aggregate does not support V3.
List Resources for aggregate
List resources for the 4 aggregate listed in the assumptions and verify that Advertisement:
- can pass rspelint
- contains expected VLAN information (vlanRangeAvailability, vlanTranslation).
GPO InstaGENI:
$ omni.py listresources -a ig-gpo -V3 -o INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm INFO:omni:Saving output to a file. INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm WARNING:omni:Requested API version 3, but AM https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0 uses version 2. Same aggregate talks API v3 at a different URL: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/3.0 INFO:omni:Switching AM URL to match requested version INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates. INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=0290a8d62a7817406203ef2fd86ed99f) INFO:omni:Writing to 'rspec-instageni-gpolab-bbn-com.xml' INFO:omni: ------------------------------------------------------------ INFO:omni: Completed listresources: Options as run: aggregate: ['ig-gpo'] api_version: 3 framework: portal output: True project: ln-prj Args: listresources Result Summary: Queried resources from 1 of 1 aggregate(s). Wrote rspecs from 1 aggregate(s) to 1 file(s) Saved listresources RSpec from 'urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm' (url 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/3.0') to file rspec-instageni-gpolab-bbn-com.xml; INFO:omni: ============================================================ $ rspeclint rspec-instageni-gpolab-bbn-com-protogeniv3.xml Ignoring node rspec_opstate with unknown namespace http://www.geni.net/resources/rspec/ext/opstate/1 $ egrep -i "vlanRangeAvailability|vlanTranslation" rspec-instageni-gpolab-bbn-com-protogeniv3.xml <vlanRangeAvailability> 3747-3749 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> <vlanRangeAvailability> 2644-2649 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation>
Internet2:
$ omni.py listresources -a i2 -V2 -o INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm INFO:omni:Saving output to a file. INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates. INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm INFO:omni:Writing to 'rspec-ion-internet2-edu.xml' INFO:omni: ------------------------------------------------------------ INFO:omni: Completed listresources: Options as run: aggregate: ['i2'] framework: portal output: True project: ln-prj Args: listresources Result Summary: Queried resources from 1 of 1 aggregate(s). Wrote rspecs from 1 aggregate(s) to 1 file(s) Saved listresources RSpec from 'urn:publicid:IDN+ion.internet2.edu+authority+cm' (url 'http://geni-am.net.internet2.edu:12346') to file rspec-ion-internet2-edu.xml; INFO:omni: ============================================================ $ rspeclint rspec-ion-internet2-edu.xml Line 6: Failed validation with root at element: Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}scheduledServices': This element is not expected. Expected is one of ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}scheduledservices, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}negotiatedservices, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}lifetime, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}node, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}port, {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}link ). : stitching $ egrep -i "vlanRangeAvailability|vlanTranslation" rspec-ion-internet2-edu.xml <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 3020-3030,3100-3109,3200-3219 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 670,3726-3750 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation>
Utah ProtoGENI:
$ omni.py listresources -a pg-utah -V3 -o INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+emulab.net+authority+cm INFO:omni:Saving output to a file. INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+emulab.net+authority+cm WARNING:omni:Requested API version 3, but AM https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0 uses version 2. Same aggregate talks API v3 at a different URL: https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0 INFO:omni:Switching AM URL to match requested version INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates. INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+emulab.net+authority+cm INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=0c869084faca0cc290a5f7f17364933c) INFO:omni:Writing to 'rspec-emulab-net.xml' INFO:omni: ------------------------------------------------------------ INFO:omni: Completed listresources: Options as run: aggregate: ['pg-utah'] api_version: 3 framework: portal output: True project: ln-prj Args: listresources Result Summary: Queried resources from 1 of 1 aggregate(s). Wrote rspecs from 1 aggregate(s) to 1 file(s) Saved listresources RSpec from 'urn:publicid:IDN+emulab.net+authority+cm' (url 'https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0') to file rspec-emulab-net.xml; INFO:omni: ============================================================ $ rspeclint rspec-emulab-net.xml Ignoring node rspec_opstate with unknown namespace http://www.geni.net/resources/rspec/ext/opstate/1 $ egrep -i "vlanRangeAvailability|vlanTranslation" rspec-emulab-net.xml <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation>
Utah InstaGENI:
$ omni.py listresources -a ig-utah -V3 -o INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Substituting AM nickname ig-utah with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm INFO:omni:Saving output to a file. INFO:omni:Substituting AM nickname ig-utah with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm WARNING:omni:Requested API version 3, but AM https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0 uses version 2. Same aggregate talks API v3 at a different URL: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0 INFO:omni:Switching AM URL to match requested version INFO:omni:Listed advertised resources at 1 out of 1 possible aggregates. INFO:omni:Substituting AM nickname ig-utah with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=7ebb578814d5e76b124dbdd2690a75f1) INFO:omni:Writing to 'rspec-utah-geniracks-net.xml' INFO:omni: ------------------------------------------------------------ INFO:omni: Completed listresources: Options as run: aggregate: ['ig-utah'] api_version: 3 framework: portal output: True project: ln-prj Args: listresources Result Summary: Queried resources from 1 of 1 aggregate(s). Wrote rspecs from 1 aggregate(s) to 1 file(s) Saved listresources RSpec from 'urn:publicid:IDN+utah.geniracks.net+authority+cm' (url 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0') to file rspec-utah-geniracks-net.xml; INFO:omni: ============================================================ $ rspeclint rspec-utah-geniracks-net.xml Ignoring node rspec_opstate with unknown namespace http://www.geni.net/resources/rspec/ext/opstate/1 $ egrep -i "vlanRangeAvailability|vlanTranslation" rspec-utah-geniracks-net.xml <vlanRangeAvailability> 256-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation>
Getversion
GPO InstaGENI:
$ omni.py getversion -V3 -a ig-gpo INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm INFO:omni:Substituting AM nickname ig-gpo with URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=9bab7721b01dc44643e4f3fe32fcdfde) INFO:omni:AM URN: urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm (url: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0) has version: ( (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=9bab7721b01dc44643e4f3fe32fcdfde).) INFO:omni:{ 'code_tag': 'd1e8fd6d3f2f912b0898ee0a90e52ebb3a155aa7', 'geni_ad_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd', 'type': 'GENI', 'version': '3'}], 'geni_api': 2, 'geni_api_versions': { '1': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/1.0', '2': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0', '3': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/3.0'}, 'geni_request_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/request.xsd', 'type': 'GENI', 'version': '3'}], 'hostname': 'boss.instageni.gpolab.bbn.com', 'hrn': 'bbninstageni.cm', 'interface': 'aggregate', 'url': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am', 'urn': 'urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm'} INFO:omni: ------------------------------------------------------------ INFO:omni: Completed getversion: Options as run: aggregate: ['ig-gpo'] api_version: 3 framework: portal noGetVersionCache: True project: ln-prj Args: getversion Result Summary: Got version for https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0 INFO:omni: ============================================================
Internet2 Aggregate:
$ omni.py getversion -V3 -a i2 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version. WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. WARNING:omni:Continuing with your requested API version 3, but consider next time calling Omni with '-V2'. INFO:omni:Substituting AM nickname i2 with URL http://geni-am.net.internet2.edu:12346, URN urn:publicid:IDN+ion.internet2.edu+authority+cm INFO:omni:AM URN: urn:publicid:IDN+ion.internet2.edu+authority+cm (url: http://geni-am.net.internet2.edu:12346) has version: INFO:omni:{ 'code_tag': '2.0-9', 'code_url': 'git://git.onelab.eu/sfa.git@sfa-2.0-9', 'geni_ad_rspec_versions': [ { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/flack/1', 'http://www.planet-lab.org/resources/sfa/ext/planetlab/1', 'http://hpn.east.isi.edu/rspec/ext/stitch/0.1/'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd', 'type': 'GENI', 'version': '3'}], 'geni_am_type': ['dcn', 'max'], 'geni_api': 2, 'geni_api_versions': { '2': 'http://geni-am.net.internet2.edu:12346'}, 'geni_request_rspec_versions': [ { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/flack/1', 'http://www.planet-lab.org/resources/sfa/ext/planetlab/1', 'http://hpn.east.isi.edu/rspec/ext/stitch/0.1/'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/request.xsd', 'type': 'GENI', 'version': '3'}], 'hostname': 'geni-am.net.internet2.edu', 'hrn': 'ion.internet2.edu', 'interface': 'aggregate', 'sfa': 2, 'testbed': 'myplc', 'urn': 'urn:publicid:IDN+ion.internet2.edu+authority+cm'} INFO:omni: ------------------------------------------------------------ INFO:omni: Completed getversion: Options as run: aggregate: ['i2'] api_version: 3 framework: portal noGetVersionCache: True project: ln-prj Args: getversion Result Summary: Your AMs do not all speak requested API v3. At the URLs you are contacting, all your AMs speak AM API v2. Continuing with your requested API version 3, but consider next time calling Omni with '-V2'. Got version for http://geni-am.net.internet2.edu:12346 INFO:omni: ============================================================
Utah ProtoGENI:
$ omni.py getversion -V3 -a pg-utah3 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Substituting AM nickname pg-utah3 with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0, URN urn:publicid:IDN+emulab.net+authority+cm INFO:omni:Substituting AM nickname pg-utah3 with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0, URN urn:publicid:IDN+emulab.net+authority+cm INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=8459ac1e74947af546d1501471bc6b18) INFO:omni:AM URN: urn:publicid:IDN+emulab.net+authority+cm (url: https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0) has version: ( (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=8459ac1e74947af546d1501471bc6b18).) INFO:omni:{ 'code_tag': '0a814e9fa25f2335fce9122911946353e70090b6', 'geni_ad_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd', 'type': 'GENI', 'version': '3'}], 'geni_allocate': 'geni_disjoint', 'geni_api': 3, 'geni_api_versions': { '1': 'https://www.emulab.net:12369/protogeni/xmlrpc/am/1.0', '2': 'https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0', '3': 'https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0'}, 'geni_credential_types': [ { 'geni_type': 'geni_sfa', 'geni_version': '2'}, { 'geni_type': 'geni_sfa', 'geni_version': '3'}], 'geni_request_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/request.xsd', 'type': 'GENI', 'version': '3'}], 'geni_single_allocation': '1', 'hostname': 'boss.emulab.net', 'hrn': 'utahemulab.cm', 'interface': 'aggregate', 'peers': { 'urn:publicid:IDN+ansp.br+authority+cm': 'https://pg-boss.ansp.br:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+attcm.net+authority+cm': 'https://localhost.localdomain/protogeni/xmlrpc/am', 'urn:publicid:IDN+chi.itesm.mx+authority+cm': 'https://boss.chi.itesm.mx/protogeni/xmlrpc/am', 'urn:publicid:IDN+cis.fiu.edu+authority+cm': 'https://pg-boss.cis.fiu.edu:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+cmcl.cs.cmu.edu+authority+cm': 'https://boss.cmcl.cs.cmu.edu/protogeni/xmlrpc/am', 'urn:publicid:IDN+cron.loni.org+authority+cm': 'https://www.cron.loni.org/protogeni/xmlrpc/am', 'urn:publicid:IDN+denali.nx+authority+cm': 'https://denali.nmc-probe.org:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+emulab.larc.usp.br+authority+cm': 'https://www.emulab.larc.usp.br:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+emulab.net+authority+cm': 'https://www.emulab.net:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+etri-cm1.kreonet.net+authority+cm': 'https://etri-cm1.kreonet.net/protogeni/xmlrpc/am', 'urn:publicid:IDN+etri-cm2.kreonet.net+authority+cm': 'https://etri-cm2.kreonet.net/protogeni/xmlrpc/am', 'urn:publicid:IDN+geni.kettering.edu+authority+cm': 'https://boss.geni.kettering.edu:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+genicloud:hplabs+authority+sa': 'https://opencirrus-07501.hpl.hp.com:12346/', 'urn:publicid:IDN+genirack.nyu.edu+authority+cm': 'https://boss.genirack.nyu.edu:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+gims.wail.wisc.edu+authority+cm': 'https://gims.wail.wisc.edu/protogeni/xmlrpc/am', 'urn:publicid:IDN+host.protogeni-abac.geni.emulab.net+authority+cm': 'https://host.protogeni-abac.geni.emulab.net/protogeni/xmlrpc/am', 'urn:publicid:IDN+instageni.arl.hpc.mil+authority+cm': 'https://boss.instageni.arl.hpc.mil:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+instageni.clemson.edu+authority+cm': 'https://boss.instageni.clemson.edu:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+instageni.cs.princeton.edu+authority+cm': 'https://boss.instageni.cs.princeton.edu:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm': 'https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+instageni.ku.gpeni.net+authority+cm': 'https://boss.instageni.ku.gpeni.net:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+instageni.northwestern.edu+authority+cm': 'https://boss.instageni.northwestern.edu:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+instageni.rnoc.gatech.edu+authority+cm': 'https://boss.instageni.rnoc.gatech.edu:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+ion:internet2:edu+authority+sa': 'https://geni-am.net.internet2.edu:12346', 'urn:publicid:IDN+jonlab.testbed.emulab.net+authority+cm': 'https://myboss.jonlab.testbed.emulab.net:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+kodiak.nx+authority+cm': 'https://kodiak.nmc-probe.org:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+lan.sdn.uky.edu+authority+cm': 'https://boss.lan.sdn.uky.edu:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+maxpl+authority+sa': 'http://max-myplc.dragon.maxgigapop.net:12346', 'urn:publicid:IDN+myelab.testbed.emulab.net+authority+cm': 'https://myboss.myelab.testbed.emulab.net:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+pgeni.gpolab.bbn.com+authority+cm': 'https://www.pgeni.gpolab.bbn.com:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+pgeni1.gpolab.bbn.com+authority+cm': 'https://www.pgeni1.gpolab.bbn.com:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+pgeni3.gpolab.bbn.com+authority+cm': 'https://www.pgeni3.gpolab.bbn.com:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+plc+authority+sa': 'https://planet-lab.org:12346', 'urn:publicid:IDN+ple+authority+sa': 'https://www.planet-lab.eu:12346/', 'urn:publicid:IDN+pni.uml.edu+authority+cm': 'https://pni.uml.edu/protogeni/xmlrpc/am', 'urn:publicid:IDN+portal.nx+authority+cm': 'https://portal.nmc-probe.org:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+schooner.wail.wisc.edu+authority+cm': 'https://www.schooner.wail.wisc.edu/protogeni/xmlrpc/am', 'urn:publicid:IDN+shadownet.uky.emulab.net+authority+cm': 'https://shadownet.uky.emulab.net/protogeni/xmlrpc/am', 'urn:publicid:IDN+sparta.com+authority+cm': 'https://host.referencecm.amp.emulab.net/protogeni/xmlrpc/am', 'urn:publicid:IDN+uky.emulab.net+authority+cm': 'https://www.uky.emulab.net:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+uml.emulab.net+authority+cm': 'https://boss.uml.emulab.net/protogeni/xmlrpc/am', 'urn:publicid:IDN+utah.geniracks.net+authority+cm': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+vwall.ilabt.iminds.be+authority+cm': 'https://www.vwall.ilabt.iminds.be:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+wall3.test.ibbt.be+authority+cm': 'https://www.wall3.test.ibbt.be:12369/protogeni/xmlrpc/am', 'urn:publicid:IDN+wilab2.ilabt.iminds.be+authority+cm': 'https://www.wilab2.ilabt.iminds.be:12369/protogeni/xmlrpc/am'}, 'url': 'https://www.emulab.net:12369/protogeni/xmlrpc/am', 'urn': 'urn:publicid:IDN+emulab.net+authority+cm'} INFO:omni: ------------------------------------------------------------ INFO:omni: Completed getversion: Options as run: aggregate: ['pg-utah3'] api_version: 3 framework: portal noGetVersionCache: True project: ln-prj Args: getversion Result Summary: Got version for https://www.emulab.net:12369/protogeni/xmlrpc/am/3.0 INFO:omni: ============================================================
Utah InstaGENI:
$ omni.py getversion -V3 -a ig-utah3 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Substituting AM nickname ig-utah3 with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm INFO:omni:Substituting AM nickname ig-utah3 with URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0, URN urn:publicid:IDN+utah.geniracks.net+authority+cm INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=980bc0d09b18c1f378c1d9660fcf31a9) INFO:omni:AM URN: urn:publicid:IDN+utah.geniracks.net+authority+cm (url: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0) has version: ( (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=980bc0d09b18c1f378c1d9660fcf31a9).) INFO:omni:{ 'code_tag': '5ae9b0b4f055a6d55d372cda4b42f0a339cf0457', 'geni_ad_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/ad.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/ad.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/ad.xsd', 'type': 'GENI', 'version': '3'}], 'geni_allocate': 'geni_disjoint', 'geni_api': 3, 'geni_api_versions': { '1': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/1.0', '2': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/2.0', '3': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0'}, 'geni_credential_types': [ { 'geni_type': 'geni_sfa', 'geni_version': '2'}, { 'geni_type': 'geni_sfa', 'geni_version': '3'}], 'geni_request_rspec_versions': [ { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.1', 'schema': 'http://www.protogeni.net/resources/rspec/0.1/request.xsd', 'type': 'ProtoGENI', 'version': '0.1'}, { 'extensions': [], 'namespace': 'http://www.protogeni.net/resources/rspec/0.2', 'schema': 'http://www.protogeni.net/resources/rspec/0.2/request.xsd', 'type': 'ProtoGENI', 'version': '0.2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/emulab/1'], 'namespace': 'http://www.geni.net/resources/rspec/3', 'schema': 'http://www.geni.net/resources/rspec/3/request.xsd', 'type': 'GENI', 'version': '3'}], 'geni_single_allocation': '1', 'hostname': 'boss.utah.geniracks.net', 'hrn': 'utahgenirack.cm', 'interface': 'aggregate', 'url': 'https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am', 'urn': 'urn:publicid:IDN+utah.geniracks.net+authority+cm'} INFO:omni: ------------------------------------------------------------ INFO:omni: Completed getversion: Options as run: aggregate: ['ig-utah3'] api_version: 3 framework: portal noGetVersionCache: True project: ln-prj Args: getversion Result Summary: Got version for https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am/3.0 INFO:omni: ============================================================
Create Sliver
Using AM API V3 commands, first create a slice and then using stitcher.py create a sliver (allocate, provision, perform operational action start/stop/restart) from GPO InstaGENI to Utah InstaGENI. Create slice:
$ omni.py createslice stitch-gpo-utah -V3 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Created slice with Name stitch-gpo-utah, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah, Expiration 2013-06-06 21:51:18 INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createslice: Options as run: api_version: 3 framework: portal project: ln-prj Args: createslice stitch-gpo-utah Result Summary: Created slice with Name stitch-gpo-utah, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah, Expiration 2013-06-06 21:51:18 INFO:omni: ============================================================
Create the sliver using stitch-ig-gpo-ig-utah.rspec:
$ stitcher.py allocate stitch-gpo-utah -V3 ./stitch-ig-gpo-ig-utah.rspec INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2 WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version. WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'. INFO:stitcher:<Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2 INFO:stitcher:<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2 INFO:stitch.Aggregate:Writing to '/tmp/stitch-gpo-utah-createsliver-request-11-instageni-gpolab-bbn-com.xml' INFO:stitch.Aggregate: Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Creating sliver(s) from rspec file /tmp/stitch-gpo-utah-createsliver-request-11-instageni-gpolab-bbn-com.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=5ff2ffb474bf4666131c03dc05b55aef) INFO:omni:Got return from CreateSliver for slice stitch-gpo-utah at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am: INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-instageni-gpolab-bbn-com-protogeni.xml' INFO:omni:<!-- Reserved resources for: Slice: stitch-gpo-utah at AM: URN: unspecified_AM_URN URL: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am --> INFO:omni:Wrote result of createsliver for slice: stitch-gpo-utah at AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-manifest-rspec-instageni-gpolab-bbn-com-protogeni.xml INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete. INFO:stitch.Aggregate:Writing to '/tmp/stitch-gpo-utah-createsliver-request-11-emulab-net.xml' INFO:stitch.Aggregate: Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Creating sliver(s) from rspec file /tmp/stitch-gpo-utah-createsliver-request-11-emulab-net.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=37b0d042a7c2aefbb95204b6ebb7e099) INFO:omni:Got return from CreateSliver for slice stitch-gpo-utah at https://www.emulab.net:12369/protogeni/xmlrpc/am: INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-www-emulab-net-protogeni.xml' INFO:omni:<!-- Reserved resources for: Slice: stitch-gpo-utah at AM: URN: unspecified_AM_URN URL: https://www.emulab.net:12369/protogeni/xmlrpc/am --> INFO:omni:Wrote result of createsliver for slice: stitch-gpo-utah at AM: https://www.emulab.net:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-manifest-rspec-www-emulab-net-protogeni.xml INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete. INFO:stitch.Aggregate:Writing to '/tmp/stitch-gpo-utah-createsliver-request-11-ion-internet2-edu.xml' INFO:stitch.Aggregate: Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Creating sliver(s) from rspec file /tmp/stitch-gpo-utah-createsliver-request-11-ion-internet2-edu.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah INFO:omni:Got return from CreateSliver for slice stitch-gpo-utah at http://geni-am.net.internet2.edu:12346: INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-geni-am-net-internet2-edu.xml' INFO:omni:<!-- Reserved resources for: Slice: stitch-gpo-utah at AM: URN: unspecified_AM_URN URL: http://geni-am.net.internet2.edu:12346 --> INFO:omni:Wrote result of createsliver for slice: stitch-gpo-utah at AM: http://geni-am.net.internet2.edu:12346 to file stitch-gpo-utah-manifest-rspec-geni-am-net-internet2-edu.xml INFO:stitch.Aggregate:DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+cm>: must wait for status ready.... INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah: INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: changing INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah: INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: changing INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah: INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: changing INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah: INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: changing INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah: INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: ready INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346 INFO:stitch.Aggregate:DCN circuit 18541 is ready INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Saving output to a file. INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Gathering resources reserved for slice stitch-gpo-utah. INFO:omni:Listed reserved resources on 1 out of 1 possible aggregates. INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-geni-am-net-internet2-edu.xml' INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+cm> complete. INFO:stitch.Aggregate:Writing to '/tmp/stitch-gpo-utah-createsliver-request-11-utah-geniracks-net.xml' INFO:stitch.Aggregate: Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Creating sliver(s) from rspec file /tmp/stitch-gpo-utah-createsliver-request-11-utah-geniracks-net.xml for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=142c1ce3613ea2c56c58681b9432d3b7) INFO:omni:Got return from CreateSliver for slice stitch-gpo-utah at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am: INFO:omni:Writing to 'stitch-gpo-utah-manifest-rspec-utah-geniracks-net-protogeni.xml' INFO:omni:<!-- Reserved resources for: Slice: stitch-gpo-utah at AM: URN: unspecified_AM_URN URL: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am --> INFO:omni:Wrote result of createsliver for slice: stitch-gpo-utah at AM: https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-manifest-rspec-utah-geniracks-net-protogeni.xml INFO:stitch.Aggregate:Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete. INFO:stitch.launcher:All aggregates are complete. INFO:stitcher:<?xml version="1.0" ?> INFO:stitcher: <!-- Reserved resources for: Slice: stitch-gpo-utah at AM: URN: stitching-combined URL: --> INFO:stitcher: <!-- Aggregate Details { "url": "https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am", "hops_info": [ { "path_id": "link", "path_global_id": "ion.internet2.edu-18541", "urn": "urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24", "vlan_tag": "3748", "id": "1" } ], "urn": "urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm", "user_requested": true, "api_version": 2 } { "url": "http://geni-am.net.internet2.edu:12346", "hops_info": [ { "path_id": "link", "path_global_id": "ion.internet2.edu-18541", "urn": "urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:ge-10/3/2:protogeni", "vlan_tag": "930", "id": "3" }, { "path_id": "link", "path_global_id": "ion.internet2.edu-18541", "urn": "urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:ae0:bbn", "vlan_tag": "3748", "id": "2" } ], "urn": "urn:publicid:IDN+ion.internet2.edu+authority+cm", "user_requested": false, "api_version": 2 } { "url": "https://www.emulab.net:12369/protogeni/xmlrpc/am", "hops_info": [ { "path_id": "link", "path_global_id": "ion.internet2.edu-18541", "urn": "urn:publicid:IDN+emulab.net+interface+procurveA:3.19", "vlan_tag": "930", "id": "5" }, { "path_id": "link", "path_global_id": "ion.internet2.edu-18541", "urn": "urn:publicid:IDN+emulab.net+interface+procurve-pgeni-atla:3.21", "vlan_tag": "930", "id": "4" } ], "urn": "urn:publicid:IDN+emulab.net+authority+cm", "user_requested": false, "api_version": 2 } { "url": "https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am", "hops_info": [ { "path_id": "link", "path_global_id": "ion.internet2.edu-18541", "urn": "urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19", "vlan_tag": "930", "id": "6" } ], "urn": "urn:publicid:IDN+utah.geniracks.net+authority+cm", "user_requested": true, "api_version": 2 } --> <rspec expires="2013-06-06T21:51:18Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3 http://www.geni.net/resources/rspec/3/manifest.xsd http://hpn.east.isi.edu/rspec/ext/stitch/0.1/ http://hpn.east.isi.edu/rspec/ext/stitch/0.1/stitch-schema.xsd"> <node client_id="ig-gpo" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc1" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+5589"> <sliver_type name="emulab-openvz"/> <services> <execute command="sudo yum install iperf -y" shell="sh"/> <login authentication="ssh-keys" hostname="pc1.instageni.gpolab.bbn.com" port="34362" username="lnevers"/> </services> <interface client_id="ig-gpo:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc1:eth1" mac_address="02eaa3978ef4" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+5592"> <ip address="192.168.4.1" netmask="255.255.255.0" type="ipv4"/> </interface> <rs:vnode name="pcvm1-14" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/> <host name="ig-gpo.stitch-gpo-utah.ch-geni-net.instageni.gpolab.bbn.com"/> </node> <node client_id="ig-utah" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc5" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20762"> <sliver_type name="emulab-openvz"/> <services> <execute command="sudo yum install iperf -y" shell="sh"/> <login authentication="ssh-keys" hostname="pc5.utah.geniracks.net" port="31546" username="lnevers"/> </services> <interface client_id="ig-utah:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" mac_address="02425aa8f240" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20765"> <ip address="192.168.4.2" netmask="255.255.255.0" type="ipv4"/> </interface> <rs:vnode name="pcvm5-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/> <host name="ig-utah.stitch-gpo-utah.ch-geni-net.utah.geniracks.net"/> </node> <link client_id="link" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20764" vlantag="930"> <!--AM urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm: sliver_id=urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+5591 vlantag=3748--> <component_manager name="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm"/> <component_manager name="urn:publicid:IDN+ion.internet2.edu+authority+cm"/> <component_manager name="urn:publicid:IDN+emulab.net+authority+cm"/> <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/> <interface_ref client_id="ig-gpo:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+5592"/> <interface_ref client_id="ig-utah:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+20765"/> <property capacity="100000" dest_id="ig-utah:if0" source_id="ig-gpo:if0"/> <property capacity="100000" dest_id="ig-gpo:if0" source_id="ig-utah:if0"/> </link> <stitching lastUpdateTime="20130606:06:53:01" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/"> <path id="link"> <hop id="1"> <link id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24"> <trafficEngineeringMetric> 10 </trafficEngineeringMetric> <capacity> 100000 </capacity> <switchingCapabilityDescriptor> <switchingcapType> l2sc </switchingcapType> <encodingType> ethernet </encodingType> <switchingCapabilitySpecificInfo> <switchingCapabilitySpecificInfo_L2sc> <interfaceMTU> 9000 </interfaceMTU> <vlanRangeAvailability> 3748 </vlanRangeAvailability> <suggestedVLANRange> 3748 </suggestedVLANRange> <vlanTranslation> false </vlanTranslation> </switchingCapabilitySpecificInfo_L2sc> </switchingCapabilitySpecificInfo> </switchingCapabilityDescriptor> </link> <nextHop> 2 </nextHop> </hop> <hop id="2"> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:ae0:bbn"> <trafficEngineeringMetric> 10 </trafficEngineeringMetric> <capacity> 100000.0 </capacity> <switchingCapabilityDescriptor> <switchingcapType> l2sc </switchingcapType> <encodingType> ethernet </encodingType> <switchingCapabilitySpecificInfo> <switchingCapabilitySpecificInfo_L2sc> <interfaceMTU> 9000 </interfaceMTU> <vlanRangeAvailability> 3748 </vlanRangeAvailability> <suggestedVLANRange> 3748 </suggestedVLANRange> <vlanTranslation> true </vlanTranslation> </switchingCapabilitySpecificInfo_L2sc> </switchingCapabilitySpecificInfo> </switchingCapabilityDescriptor> </link> <nextHop> 3 </nextHop> </hop> <hop id="3"> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:ge-10/3/2:protogeni"> <trafficEngineeringMetric> 10 </trafficEngineeringMetric> <capacity> 100000.0 </capacity> <switchingCapabilityDescriptor> <switchingcapType> l2sc </switchingcapType> <encodingType> ethernet </encodingType> <switchingCapabilitySpecificInfo> <switchingCapabilitySpecificInfo_L2sc> <interfaceMTU> 9000 </interfaceMTU> <vlanRangeAvailability> 930 </vlanRangeAvailability> <suggestedVLANRange> 930 </suggestedVLANRange> <vlanTranslation> true </vlanTranslation> </switchingCapabilitySpecificInfo_L2sc> </switchingCapabilitySpecificInfo> </switchingCapabilityDescriptor> </link> <nextHop> 4 </nextHop> </hop> <hop id="4"> <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-atla:3.21"> <trafficEngineeringMetric> 10 </trafficEngineeringMetric> <capacity> 100000 </capacity> <switchingCapabilityDescriptor> <switchingcapType> l2sc </switchingcapType> <encodingType> ethernet </encodingType> <switchingCapabilitySpecificInfo> <switchingCapabilitySpecificInfo_L2sc> <interfaceMTU> 9000 </interfaceMTU> <vlanRangeAvailability> 930 </vlanRangeAvailability> <suggestedVLANRange> 930 </suggestedVLANRange> <vlanTranslation> false </vlanTranslation> </switchingCapabilitySpecificInfo_L2sc> </switchingCapabilitySpecificInfo> </switchingCapabilityDescriptor> </link> <nextHop> 5 </nextHop> </hop> <hop id="5"> <link id="urn:publicid:IDN+emulab.net+interface+procurveA:3.19"> <trafficEngineeringMetric> 10 </trafficEngineeringMetric> <capacity> 100000 </capacity> <switchingCapabilityDescriptor> <switchingcapType> l2sc </switchingcapType> <encodingType> ethernet </encodingType> <switchingCapabilitySpecificInfo> <switchingCapabilitySpecificInfo_L2sc> <interfaceMTU> 9000 </interfaceMTU> <vlanRangeAvailability> 930 </vlanRangeAvailability> <suggestedVLANRange> 930 </suggestedVLANRange> <vlanTranslation> false </vlanTranslation> </switchingCapabilitySpecificInfo_L2sc> </switchingCapabilitySpecificInfo> </switchingCapabilityDescriptor> </link> <nextHop> 6 </nextHop> </hop> <hop id="6"> <link id="urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19"> <trafficEngineeringMetric> 10 </trafficEngineeringMetric> <capacity> 100000 </capacity> <switchingCapabilityDescriptor> <switchingcapType> l2sc </switchingcapType> <encodingType> ethernet </encodingType> <switchingCapabilitySpecificInfo> <switchingCapabilitySpecificInfo_L2sc> <interfaceMTU> 9000 </interfaceMTU> <vlanRangeAvailability> 930 </vlanRangeAvailability> <suggestedVLANRange> 930 </suggestedVLANRange> <vlanTranslation> false </vlanTranslation> </switchingCapabilitySpecificInfo_L2sc> </switchingCapabilitySpecificInfo> </switchingCapabilityDescriptor> </link> <nextHop> null </nextHop> </hop> </path> </stitching> </rspec> Stitching success: Reserved resources in slice stitch-gpo-utah at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 link(s).
Note: Could not use V3 provision and poa functions with stitcher.py, slivers were ready after the allocate command.
List resources for sliver
Could not use describe function with stitcher.py:
$ stitcher.py describe stitch-gpo-utah -V3 -o INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm) INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm) INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm) INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm) INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version. WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'. ERROR:omni:Describe is only available in AM API v3+. Use ListResources with AM API v2, or specify -V3 to use AM API v3. Describe is only available in AM API v3+. Use ListResources with AM API v2, or specify -V3 to use AM API v3.
Note: Could not use V3 describe function with stitcher.py.
Sliver status
Could not use the V3 status command with stitcher.py:
$ stitcher.py status stitch-gpo-utah -V3 -o INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm) INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm) INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm) INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm) INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version. WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'. ERROR:omni:Status is only available in AM API v3+. Use SliverStatus with AM API v2, or specify -V3 to use AM API v3. Status is only available in AM API v3+. Use SliverStatus with AM API v2, or specify -V3 to use AM API v3.
Verify that the slivers are ready with V2:
$ stitcher.py sliverstatus stitch-gpo-utah -V3 -o INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm) INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm) INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm) INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm) INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version. WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'. INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni:Status of Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah: INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=95d114d26c2ecc2a1acb353f36a8b54c) INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am has overall SliverStatus: ready <===READY=> INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-instageni-gpolab-bbn-com-protogeni.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=8c06b83db995ee494c7204dabf63d7d6) INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://www.emulab.net:12369/protogeni/xmlrpc/am has overall SliverStatus: ready INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-www-emulab-net-protogeni.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL https://www.emulab.net:12369/protogeni/xmlrpc/am INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=e6785536c17648f68a013a818bc99066) INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am has overall SliverStatus: ready <===READY===> INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-utah-geniracks-net-protogeni.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: ready INFO:omni:Writing to 'stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json' INFO:omni:Sliver status for Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM URL http://geni-am.net.internet2.edu:12346 Your AMs do not all speak requested API v3. At the URLs you are contacting, all your AMs speak AM API v2. Switching to AM API v2. Next time call Omni with '-V2'. Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day(s) on 2013-06-06 21:51:18 UTC Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am has overall SliverStatus: ready. <===READY===> Saved sliverstatus on stitch-gpo-utah at AM https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-sliverstatus-instageni-gpolab-bbn-com-protogeni.json. Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://www.emulab.net:12369/protogeni/xmlrpc/am has overall SliverStatus: ready. Saved sliverstatus on stitch-gpo-utah at AM https://www.emulab.net:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-sliverstatus-www-emulab-net-protogeni.json. Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am has overall SliverStatus: ready. Saved sliverstatus on stitch-gpo-utah at AM https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am to file stitch-gpo-utah-sliverstatus-utah-geniracks-net-protogeni.json. Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 has overall SliverStatus: ready. <===READY===> Saved sliverstatus on stitch-gpo-utah at AM http://geni-am.net.internet2.edu:12346 to file stitch-gpo-utah-sliverstatus-geni-am-net-internet2-edu.json. Returned status of slivers on 4 of 4 possible aggregates.
Note: Could not use the V3 status command with stitcher.py
Renew sliver
First slice expiration, renew slice and then sliver:
$ omni.py print_slice_expiration stitch-gpo-utah INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day on 2013-06-06 21:51:18 UTC INFO:omni: ------------------------------------------------------------ INFO:omni: Completed print_slice_expiration: Options as run: framework: portal project: ln-prj Args: print_slice_expiration stitch-gpo-utah Result Summary: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires within 1 day(s) on 2013-06-06 21:51:18 UTC INFO:omni: ============================================================ $ omni.py renewslice stitch-gpo-utah 2013-06-08 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni.pgch:Requesting new slice expiration '2013-06-08T00:00:00' INFO:omni:Slice stitch-gpo-utah now expires at 2013-06-08 00:00:00 UTC INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC INFO:omni: ------------------------------------------------------------ INFO:omni: Completed renewslice: Options as run: framework: portal project: ln-prj Args: renewslice stitch-gpo-utah 2013-06-08 Result Summary: Slice stitch-gpo-utah now expires at 2013-06-08 00:00:00 UTC Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC INFO:omni: ============================================================
Renew sliver:
$ stitcher.py renewsliver stitch-gpo-utah 2013-06-08 INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm) INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm) INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm) INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm) INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC INFO:omni:Renewing Sliver stitch-gpo-utah until 2013-06-08 00:00:00+00:00 (UTC) INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=d93863cc6af0506115b11f956b3e55df) INFO:omni:Renewed sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at unspecified_AM_URN (https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am) until 2013-06-08T00:00:00+00:00 (UTC) INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=95014bab7b39abcdf2f15a1a430f60c4) INFO:omni:Renewed sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at unspecified_AM_URN++ (https://www.emulab.net:12369/protogeni/xmlrpc/am) until 2013-06-08T00:00:00+00:00 (UTC) INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=f934095065417640b84ee0c0dbd420ba) INFO:omni:Renewed sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at unspecified_AM_URN+++ (https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am) until 2013-06-08T00:00:00+00:00 (UTC) INFO:omni:Renewed sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah at unspecified_AM_URN+ (http://geni-am.net.internet2.edu:12346) until 2013-06-08T00:00:00+00:00 (UTC) Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC Renewed slivers on 4 out of 4 aggregates for slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah until 2013-06-08 00:00:00+00:00 (UTC)
Delete sliver
Could not use V3 delete command:
$ stitcher.py delete stitch-gpo-utah -V3 INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm) INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm) INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm) INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm) INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version. WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'. ERROR:omni:Delete is only available in AM API v3+. Use DeleteSliver with AM API v2, or specify -V3 to use AM API v3. Delete is only available in AM API v3+. Use DeleteSliver with AM API v2, or specify -V3 to use AM API v3.
Used V2 deletesliver to delete the sliver:
$ stitcher.py delete stitch-gpo-utah -V3 INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm) INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm) INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm) INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm) INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version. WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'. ERROR:omni:Delete is only available in AM API v3+. Use DeleteSliver with AM API v2, or specify -V3 to use AM API v3. Delete is only available in AM API v3+. Use DeleteSliver with AM API v2, or specify -V3 to use AM API v3. lnevers@arendia:~/gcf-2.3.1/stitch-test$ stitcher.py deletesliver stitch-gpo-utah -V3 INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:Reading stitching slice stitch-gpo-utah aggregates from file ch\.geni\.net.ln-prj.stitch-gpo-utah-amlist.txt INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm) INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm) INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm) INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm) INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal WARNING:omni:You asked to use AM API 3, but the AM(s) you are contacting do not all speak that version. WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v2. WARNING:omni:Switching to AM API v2. Next time call Omni with '-V2'. INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah expires on 2013-06-08 00:00:00 UTC INFO:omni: (PG log url - look here for details on any failures: https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=ba61835e4eb1970fa9ffd50721eaf426) INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah on unspecified_AM_URN at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am INFO:omni: (PG log url - look here for details on any failures: https://www.emulab.net/spewlogfile.php3?logfile=add7757854b9583b2e9920845b106071) INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah on unspecified_AM_URN++ at https://www.emulab.net:12369/protogeni/xmlrpc/am INFO:omni: (PG log url - look here for details on any failures: https://boss.utah.geniracks.net/spewlogfile.php3?logfile=20e7d77cfcd230bacb7911d79c7eb1fe) INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah on unspecified_AM_URN+++ at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am INFO:omni:Deleted sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+stitch-gpo-utah on unspecified_AM_URN+ at http://geni-am.net.internet2.edu:12346 Your AMs do not all speak requested API v3. At the URLs you are contacting, all your AMs speak AM API v2. Switching to AM API v2. Next time call Omni with '-V2'. Deleted slivers on 4 out of a possible 4 aggregates
Note: Could not use V3 delete command
Shutdown Sliver
Ran shutdown on stitched slice ln-ext1:
$ stitcher.py shutdown ln-ext1 INFO:stitcher:Loading config file /home/lnevers/.gcf/omni_config INFO:stitcher:Using control framework portal INFO:stitcher:Reading stitching slice ln-ext1 aggregates from file ch\.geni\.net.ln-prj.ln-ext1-amlist.txt INFO:stitcher:Adding aggregate option https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am (urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm) INFO:stitcher:Adding aggregate option http://geni-am.net.internet2.edu:12346 (urn:publicid:IDN+ion.internet2.edu+authority+cm) INFO:stitcher:Adding aggregate option https://www.emulab.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+emulab.net+authority+cm) INFO:stitcher:Adding aggregate option https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am (urn:publicid:IDN+utah.geniracks.net+authority+cm) INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework portal INFO:omni:Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 expires within 1 day on 2013-06-07 00:50:54 UTC ERROR:omni.pgch:Call for Shutdown urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am failed. Server says: <Fault -32600: 'Internal Error executing Shutdown'> WARNING:omni:Failed to shutdown sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on AM unspecified_AM_URN at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am. <Fault -32600: 'Internal Error executing Shutdown'> (missing result) ERROR:omni.pgch:Call for Shutdown urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on https://www.emulab.net:12369/protogeni/xmlrpc/am failed. Server says: <Fault -32600: 'Internal Error executing Shutdown'> WARNING:omni:Failed to shutdown sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on AM unspecified_AM_URN++ at https://www.emulab.net:12369/protogeni/xmlrpc/am. <Fault -32600: 'Internal Error executing Shutdown'> (missing result) ERROR:omni.pgch:Call for Shutdown urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am failed. Server says: <Fault -32600: 'Internal Error executing Shutdown'> WARNING:omni:Failed to shutdown sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on AM unspecified_AM_URN+++ at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am. <Fault -32600: 'Internal Error executing Shutdown'> (missing result) INFO:omni:Shutdown Sliver urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on AM unspecified_AM_URN+ at http://geni-am.net.internet2.edu:12346 Shutdown slivers of slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+ln-ext1 on 1 of 4 possible aggregates
GENI RSpec Support
GENI RSpec support tests validate that each of the RSpec (Advertisement, Manifest, and Request) provide complete and accurate information.
The Advertisement RSpec were validated as part of the listresources output validation, not being re-executed here.
The manifest RSpecs generates as part of the create sliver in the functional tests were used for validation.
The GPO InstaGENI manifest:
$ rspeclint stitch-gpo-utah-manifest-rspec-instageni-gpolab-bbn-com-protogeni.xml Ignoring node rs:vnode with unknown namespace http://www.protogeni.net/resources/rspec/ext/emulab/1 Line 28: Failed validation with root at element: Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}switchingCapabilityDescriptor ). Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/} switchingCapabilityDescriptor ). : stitching
The Internet2 manifest:
$ rspeclint stitch-gpo-utah-manifest-rspec-geni-am-net-internet2-edu.xml $
The Utah ProtoGENI manifest:
$ rspeclint stitch-gpo-utah-manifest-rspec-www-emulab-net-protogeni.xml Line 28: Failed validation with root at element: Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}switchingCapabilityDescriptor ). Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}switchingCapabilityDescriptor ). : stitching
The InstaGENI Utah manifest:
$ rspeclint stitch-gpo-utah-manifest-rspec-utah-geniracks-net-protogeni.xml Ignoring node rs:vnode with unknown namespace http://www.protogeni.net/resources/rspec/ext/emulab/1 Line 28: Failed validation with root at element: Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}switchingCapabilityDescriptor ). Schemas validity error : Element '{http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}capabilities': This element is not expected. Expected is ( {http://hpn.east.isi.edu/rspec/ext/stitch/0.1/}switchingCapabilityDescriptor ). : stitching
Stitching Extensions
Verified that request RSpec with stitching extension results in an extension being used. The sliver in the functional test was also created with an RSpec that did include the stitching extension. No issues found.
Verified that request RSpec without stitching extension results in an extension being created. The sliver in the functional test did not specify an extension and thus verified that one was created. No issues found.
Verified Stitching Path support for a single point-to-point path path with one stitched slice from Utah InstaGENI to GPO InstaGENI in the functional experiment. Once set up, exchanged traffic between host endpoints. No issues found.
Verified Stitching Path support for multiple point-to-point paths by having 2 concurrent stitched slivers (ln-ext1, ln-ext2) from Utah InstaGENI to GPO InstaGENI. Set up first sliver (ln-ext1) and logged into endpoint hosts to send ping traffic. Left pings running and created the second sliver (ln-ext2). Second sliver started without any problem and started pings between end-points. Left both experiments running for 1 hour. Was able to renew sliver and get sliver status on both experiments.
Requests RSpec validation
Verified RSpec Versions 3 support by the creation of the sliver in the functional test which used a V3 RSpec. Rspec is attached as stitch-ig-gpo-ig-utah.rspec.
Verified routing profile options by including both an include and and exclude VLANs range in stitcher.py. The hop_include_list and hop_exclude_list were verified as follows:
First determine range to use by getting an Advertisement RSpec at each aggregate. PG Utah and IG Utah were used in this scenario:
IG Utah Advertisement details:
<node id="urn:publicid:IDN+utah.geniracks.net+node+procurve2"> <port id="urn:publicid:IDN+utah.geniracks.net+stitchport+procurve2:1.19"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19"> <remoteLinkId> urn:publicid:IDN+emulab.net+interface+procurveA:3.19 </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 256-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node>
PG Utah Advertisement details:
<node id="urn:publicid:IDN+emulab.net+node+procurveA"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurveA:3.19"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurveA:3.19"> <remoteLinkId> urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19 </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node>
The IG Utah site uses VLAN Range 256-1000, while the PG Utah site uses VLAN Rang 750-1000. Pick a range that overlaps and creates the sliver as follows:
$ stitcher.py ???
- VLAN tags (exclude only)
(NEED TO VERIFY) Verify only bandwidth and VLAN are negotiable.
RSpec Input Validation
(NEED TO VERIFY ALL )
- Request link with only 1 component_manager tag
- Request link with 2 interface_ref elements but no component_manager elements
- Request link with 2 local interface_ref elements and 1 remote interface_ref element
- Request link with an interface_ref whose client_id is not the ID for any interface in the RSpec
- Request stitching extension with a path that has 0 hops
- Request capacity that is below minimum and above maximum reservable Capacity
- Invalid Path options (not sure what this is and how to do it ?)
- Invalid Routing profiles (not sure what this is and how to do it ?)
- Include/exclude invalid VLANs
Advertisement RSpecs
Advertisement RSpecs were reviewed to verify that they accurately capture the following for each of the aggregates:
- Stitching elements (nodes, ports, links, capacity)
- VLAN IDs and their availability
- VLAN Bandwidth capability
Information from the GPO InstaGENI Advertisement RSpec:
$ egrep -i "node|port|link|capacity|vlanrange|translation" rspec-instageni-gpolab-bbn-com.xml .... .... <node id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+procurve2"> <port id="urn:publicid:IDN+instageni.gpolab.bbn.com+stitchport+procurve2:5.24"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:ae0:bbn </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 3747-3749 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+procurve2"> <port id="urn:publicid:IDN+instageni.gpolab.bbn.com+stitchport+procurve2:5.24"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24"> <remoteLinkId> urn:publicid:IDN+NLR+interface+BBNIFACE </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2644-2649 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node>
Information from the Internet2 Advertisement RSpec:
$ egrep -i "node|port|link|capacity|vlanrange|translation" rspec-ion-internet2-edu.xml <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.kans"> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.kans:ge-10/2/9"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.kans:ge-10/2/9:protogeni"> <remoteLinkId> urn:publicid:IDN+emulab.net+node+procurve-pgeni-kans:3.12 </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.kans:*"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.kans:*:*"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+*:*:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.wash"> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.wash:ge-10/3/1"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:ge-10/3/1:protogeni"> <remoteLinkId> urn:publicid:IDN+emulab.net+interface+procurve-pgeni-wash:1.24 </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.wash:*"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:*:*"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+*:*:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.losa"> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.losa:ge-10/3/0"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.losa:ge-10/3/0:protogeni"> <remoteLinkId> urn:publicid:IDN+emulab.net+interface+procurve-pgeni-losa:3.31 </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.losa:*"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.losa:*:*"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+*:*:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.hous"> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.hous:ge-9/1/4"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:ge-9/1/4:protogeni"> <remoteLinkId> urn:publicid:IDN+emulab.net+interface+procurve-pgeni-hous:3.24 </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.hous:xe-7/1/0"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:xe-7/1/0:*"> <remoteLinkId> urn:publicid:IDN+loni.org+interface+loni-dcn-e1:0-1-4:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.hous:*"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:*:*"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+*:*:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.atla"> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.atla:ge-10/3/2"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:ge-10/3/2:protogeni"> <remoteLinkId> urn:publicid:IDN+emulab.net+interface+procurve-pgeni-atla:3.21 </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.atla:xe-0/1/3"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:xe-0/1/3:*"> <remoteLinkId> urn:publicid:IDN+*+interface+*:*:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.atla:*"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:*:*"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+*:*:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.salt"> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.salt:ge-10/2/7"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.salt:ge-10/2/7:protogeni"> <remoteLinkId> urn:publicid:IDN+emulab.net+interface+procurve-pgeni-salt:3.21 </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.salt:*"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.salt:*:*"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+*:*:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+ion.internet2.edu+node+rtr.newy"> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.newy:xe-0/1/1"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:xe-0/1/1:*"> <remoteLinkId> urn:publicid:IDN+dragon.maxgigapop.net+interface+clpk:1/2/3:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 3020-3030,3100-3109,3200-3219 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.newy:ae0"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:ae0:bbn"> <remoteLinkId> urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24 </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 670,3726-3750 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> <port id="urn:publicid:IDN+ion.internet2.edu+stitchport+rtr.newy:*"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:*:*"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+*:*:* </remoteLinkId> <capacity> 10000000 </capacity> <maximumReservableCapacity> 10000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 2-4094 </vlanRangeAvailability> <vlanTranslation> true </vlanTranslation> </link> </port> </node>
Information from the Utah ProtoGENI Advertisement RSpec:
$ egrep -i "node|port|link|capacity|vlanrange|translation" rspec-emulab-net.xml .... .... </link> <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-losa"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-losa:3.21"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-losa:3.21"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+rtr.losa:ge-10/3/0:protogeni </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-atla"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-atla:3.21"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-atla:3.21"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:ge-10/3/2:protogeni </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+emulab.net+node+procurveA"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurveA:3.19"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurveA:3.19"> <remoteLinkId> urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19 </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-kans"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-kans:3.21"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-kans:3.21"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+rtr.kans:ge-10/2/9:protogeni </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-kans"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-kans:3.12"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-kans:3.12"> <remoteLinkId> urn:publicid:IDN+gpeni+interface+bbg1.gpeni </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-salt"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-salt:3.21"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-salt:3.21"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+rtr.salt:ge-10/2/7:protogeni </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-wash"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-wash:1.24"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-wash:1.24"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:ge-10/3/1:protogeni </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node> <node id="urn:publicid:IDN+emulab.net+node+procurve-pgeni-hous"> <port id="urn:publicid:IDN+emulab.net+stitchport+procurve-pgeni-hous:3.24"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+emulab.net+interface+procurve-pgeni-hous:3.24"> <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+rtr.hous:ge-9/1/4:protogeni </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 750-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node>
Information from the Utah InstaGENI Advertisement RSpec:
$ egrep -i "node|port|link|capacity|vlanrange|translation" rspec-utah-geniracks-net.xml .... .... <node id="urn:publicid:IDN+utah.geniracks.net+node+procurve2"> <port id="urn:publicid:IDN+utah.geniracks.net+stitchport+procurve2:1.19"> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <link id="urn:publicid:IDN+utah.geniracks.net+interface+procurve2:1.19"> <remoteLinkId> urn:publicid:IDN+emulab.net+interface+procurveA:3.19 </remoteLinkId> <capacity> 1000000 </capacity> <maximumReservableCapacity> 1000000 </maximumReservableCapacity> <minimumReservableCapacity> 1000 </minimumReservableCapacity> <vlanRangeAvailability> 256-1000 </vlanRangeAvailability> <vlanTranslation> false </vlanTranslation> </link> </port> </node>
Negative and Boundary tests
This is a starting list of scenarios that will validate negative and boundary conditions:
- At ION, InstaGENI and ExoGENI, allocate resources that are not advertised, verify failure.
- At ION, InstaGENI and ExoGENI, allocate VLAN tags that are already in use, verify failure.
- Kill an ION circuit manually, verify recovery and logging of event.
- Request a VLAN that is already in use, verify handling.
- Create a request race condition where two slices (Slice1 and Slice2) request the same resources (AM1 <->VLAN1<->AM2), but Slice1 gets VLAN1 at AM1 and Slice2 gets VLAN1 at AM2. Verify results tools handle the results and properly handle resources.
- Pseudo Loop Scenario: Request PG Utah to ION to IG GPO. Then request a 2nd interface at PG Utah node to ION to same interface on same node at IG GPO. If that fails, then request a 2nd interface on that node at IG GPO - that should work.
Attachments (1)
- stitch-ig-gpo-ig-utah.rspec (1.6 KB) - added by 11 years ago.
Download all attachments as: .zip