Changes between Version 27 and Version 28 of GeniNetworkStitchingTestStatus/Functional


Ignore:
Timestamp:
06/06/13 13:30:21 (11 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GeniNetworkStitchingTestStatus/Functional

    v27 v28  
    13111311=== Shutdown Sliver ===
    13121312
    1313 Did not run shutdown to invasive.. need to plan for time.
     1313Did not run shutdown yet,planned for 2:00 pm EDT June 6.
    13141314
    13151315
     
    13581358
    13591359
    1360 '''Stitching Extensions:''' [[BR]]
    1361 
    1362  - Request RSpec with stitching extension -> to verify that extension is used - The sliver in the functional test was also created with an RSpec that did include the stitching extension. No problems found.
    1363  - Request RSpec without stitching extension -> to verify that one is created - The sliver in the functional test did not specify an extension and thus verified that one was created. No problems found.
     1360=== Stitching Extensions ===
     1361
     1362Verified that request RSpec with stitching extension results in an extension being used. The sliver in the functional test was also created with an RSpec that did include the stitching extension. No issues found.
     1363
     1364Verified that request RSpec without stitching extension results in an extension being created. The sliver in the functional test did not specify an extension and thus verified that one was created. No issues found.
    13641365 
    1365  - Stitching Path support: (NEED TO VERIFY)
    1366       * Point-to-point path only
    1367       * Multiple point-to-point
    1368 
    1369 '''Requests RSpec validation:''' [[BR]]
    1370 
    1371    - RSpec Versions support (V3) - The support of RSpec V3 was verified by the creation of the sliver in the functional test which used a V3 RSpec.
    1372    - Routing profile options to include or exclude: (NEED TO VERIFY)
     1366
     1367Verified Stitching Path support for a ''point-to-point path'' from Utah InstaGENI to GPO InstaGENI in functional experiment. Once set up, exchanged traffic between host endpoints. No issues found.
     1368
     1369 
     1370Verified Stitching Path support for "multiple point-to-point'' paths by having two concurrent stitched slivers (ln-ext1, ln-ext2) from Utah InstaGENI to GPO InstaGENI.   Set up first sliver (ln-ext1) and logged into endpoint hosts to send ping traffic. Left pings running and created the second sliver (ln-ext2). Second sliver started without any problem and started pings between end-points.
     1371Left both experiments running for 1 hour.
     1372 
     1373
     1374=== Requests RSpec validation ===
     1375
     1376Verified RSpec Versions 3 support by the creation of the sliver in the functional test which used a V3 RSpec. Rspec is attached as [http://groups.geni.net/geni/attachment/wiki/GeniNetworkStitchingTestStatus/Functional/stitch-ig-gpo-ig-utah.rspec stitch-ig-gpo-ig-utah.rspec].
     1377
     1378
     1379(NEED TO VERIFY) Routing profile options to include or exclude:
    13731380     * hop_include_list
    13741381     * hop_exclude_list
    13751382     * VLAN tags (exclude only)
    1376   - Verify '''only''' bandwidth and VLAN are negotiable.
    1377 
    1378 
    1379 '''RSpec Input Validation:'' [[BR]] (NEED TO VERIFY)
     1383(NEED TO VERIFY) Verify '''only''' bandwidth and VLAN are negotiable.
     1384
     1385
     1386=== RSpec Input Validation ===
     1387
     1388(NEED TO VERIFY ALL )
    13801389
    13811390  - Request link with only 1 component_manager tag
     
    13901399
    13911400 
    1392 '''Advertisement RSpecs:''' [[BR]]
     1401=== Advertisement RSpecs ===
    13931402
    13941403Advertisement RSpecs were reviewed to verify that they accurately capture the following for each of the aggregates: