Changes between Version 119 and Version 120 of GeniNetworkStitchingSites
- Timestamp:
- 06/11/15 16:33:56 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GeniNetworkStitchingSites
v119 v120 36 36 || University of Wisconsin InstaGENI ||wisconsin-ig || 15 || 37 37 38 GENI Network stitching is possible between all of the above InstaGENI and ExoGENI sites. Example GENI stitching RSpecs are available [http://groups.geni.net/geni/browser/trunk/stitch-examples here]. For an example experiment that uses GENI Network Stitching, see this [wiki:GENIExperimenter/ExperimentExample-stitching GENI Network Stitching Example] page. To determine resource availability refer to the [wiki:ExpGraphs InstaGENI Site Usage] page. VLANs delegated to GENI stitching are tracked by ID [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView here.]38 GENI Network stitching is possible between all of the above InstaGENI and ExoGENI sites. Example GENI stitching RSpecs are available [http://groups.geni.net/geni/browser/trunk/stitch-examples here]. For an example experiment that uses GENI Network Stitching, see this [wiki:GENIExperimenter/ExperimentExample-stitching GENI Network Stitching Example] page. To determine resource availability, refer to the [wiki:ExpGraphs InstaGENI Site Usage] page. VLANs delegated to GENI stitching are tracked by ID [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView here.] 39 39 40 40 … … 51 51 - Stitching RSpecs that include ''raw-pc'' sliver types must specify a capacity. 52 52 - If any part of a sliver creation fails, the stitcher will delete the stitched sliver at each aggregate. 53 - If you interrupt the stitcher sliver creation with GCF 2.8 or later the stitcher will attempt to delete all sliver, but if you are using GCF 2.7 or earlier you must delete the sliver at each of the aggregates listed by the stitcher as part of the stitched path, and re-create the entire slice.53 - If you interrupt the stitcher sliver creation with GCF 2.8 or later, the stitcher will attempt to delete all slivers, but if you are using GCF 2.7 or earlier you must delete the sliver at each of the aggregates listed by the stitcher as part of the stitched path, and re-create the entire slice. 54 54 55 55 … … 64 64 65 65 66 Is you are interested in setting up a GENI Stitching connection to a fixed endpoint see the [wiki:GeniNetworkStitchingSites/GENIFixeEndpoint Fixed End Point Topology Using GENI Stitching] page.66 Is you are interested in setting up a GENI Stitching connection to a fixed endpoint, see the [wiki:GeniNetworkStitchingSites/GENIFixeEndpoint Fixed End Point Topology Using GENI Stitching] page. 67 67 68 68 == GENI Stitching AL2S Path Mappings == … … 113 113 || wash.net.internet2.edu || eth7/2 || gwu-geni-cinema || 724 || 114 114 115 Additional GENI Stitching paths not associated with site , but are stitching endpoints:115 Additional GENI Stitching paths not associated with sites, but are stitching endpoints: 116 116 117 117 ||''' Router''' ||''' Interface''' ||''' VLAN Range''' ||