= University of Wisconsin Stitching Confirmation Tests =

This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.

== IG-ST-1 New Site to GPO IG topology ==
The Wisconsin site advertises the following stitching details:
{{{
  <stitching lastUpdateTime="2013-11-21T20:21:05Z" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/">    
    <aggregate id="urn:publicid:IDN+instageni.wisc.edu+authority+cm" url="https://www.instageni.wisc.edu:12369/protogeni/xmlrpc/am">      
      <aggregatetype>        protogeni      </aggregatetype>      
      <stitchingmode>        chainANDTree      </stitchingmode>      
      <scheduledservices>        false      </scheduledservices>      
      <negotiatedservices>        false      </negotiatedservices>      
      <lifetime id="life">        
            <start type="time">          2013-11-21T20:21:05Z        </start>        
            <end type="time">          2013-11-21T20:21:05Z        </end>        
      </lifetime>      
      <node id="urn:publicid:IDN+instageni.wisc.edu+node+procurve2">        
          <port id="urn:publicid:IDN+instageni.wisc.edu+stitchport+procurve2:1.19">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <granularity>            1          </granularity>          
              <link id="urn:publicid:IDN+instageni.wisc.edu+interface+procurve2:1.19">            
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.chic:et-8/0/0:wisconsin-ig            </remoteLinkId>            
                  <trafficEngineeringMetric>              10            </trafficEngineeringMetric>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                  <granularity>              1            </granularity>            
                  <switchingCapabilityDescriptor>              
                      <switchingcapType>                l2sc              </switchingcapType>              
                      <encodingType>                ethernet              </encodingType>              
                      <switchingCapabilitySpecificInfo>                
                         <switchingCapabilitySpecificInfo_L2sc>                  
                            <interfaceMTU>                    9000                  </interfaceMTU>                  
                            <vlanRangeAvailability>                    930-939                  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                  
                         </switchingCapabilitySpecificInfo_L2sc>                
                      </switchingCapabilitySpecificInfo>              
                  </switchingCapabilityDescriptor>            
              </link>          
          </port>        
      </node>      
    </aggregate>    
  </stitching> 
}}}

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be  requested.

Create a slice and then create the stitched slivers with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Wisconsin/IG-ST-1-ion.rspec IG-ST-1-ion.rspec]:
{{{
$ omni.py createslice IG-ST-1
15:25:43 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
15:25:43 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
15:25:43 INFO     omni: Using control framework emulab
15:25:56 INFO     omni: Created slice with Name IG-ST-1, URN urn:publicid:IDN+emulab.net+slice+IG-ST-1, Expiration 2013-11-22 02:25:55+00:00
15:25:56 INFO     omni:  ------------------------------------------------------------
15:25:56 INFO     omni:  Completed createslice:
Args: createslice IG-ST-1

  Result Summary: Created slice with Name IG-ST-1, URN urn:publicid:IDN+emulab.net+slice+IG-ST-1, Expiration 2013-11-22 02:25:55+00:00
 
15:25:56 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-1 IG-ST-1-ion.rspec -o
15:26:24 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
15:26:24 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
15:26:24 INFO     stitcher: Using control framework emulab
15:26:24 INFO     stitcher: Checking that slice IG-ST-1 is valid...
15:26:30 INFO     omni.protogeni: Detected busy result for Resolve PG slice urn:publicid:IDN+emulab.net+slice+IG-ST-1 at SA https://www.emulab.net:443/protogeni/xmlrpc/sa. Retrying in 10 seconds.
15:26:46 INFO     stitcher: Slice urn:publicid:IDN+emulab.net+slice+IG-ST-1 expires within 1 day on 2013-11-22 02:25:55 UTC
15:26:49 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm> speaks AM API v3, but sticking with v2
15:26:49 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
15:26:49 INFO     stitcher: Stitched reservation will include resources from these aggregates:
15:26:49 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm>
15:26:49 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
15:26:49 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
15:26:49 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-wisc-edu.xml'
15:26:49 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.wisc.edu:12369/protogeni/xmlrpc/am
15:27:09 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm> complete.
15:27:09 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-gpolab-bbn-com.xml'
15:27:09 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
15:27:29 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
15:27:29 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-ion-internet2-edu.xml'
15:27:29 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
15:28:12 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
15:28:12 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
15:28:49 INFO     stitch.Aggregate: DCN circuit 50731 is ready
15:28:56 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
15:28:56 INFO     stitch.launcher: All aggregates are complete.
15:28:56 INFO     stitcher: Writing to 'IG-ST-1-manifest-rspec-stitching-combined.xml'
15:28:56 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-1-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 link(s).
}}}

Determined login information at each Wisconsin and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-1 -a wisconsin-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.wisc.edu:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-wisc's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-wisc using:
	ssh -p 33082  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.instageni.wisc.edu

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: changing (am_status:changing) 
User lnevers logs in to ig-gpo using:
	ssh -p 38714  -i /home/lnevers/.ssh/id_rsa lnevers@pc5.instageni.gpolab.bbn.com
}}}

=== Measurements ===

'''Iperf InstaGENI GPO VM to InstaGENI Wisconsin VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2013-11-21''

__One Client_
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   170 MBytes  23.7 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec
[  6]  0.0-60.1 sec   142 MBytes  19.8 Mbits/sec
[  4]  0.0-60.1 sec   143 MBytes  19.9 Mbits/sec
[  7]  0.0-60.1 sec   143 MBytes  20.0 Mbits/sec
[  3]  0.0-60.1 sec   142 MBytes  19.8 Mbits/sec
[SUM]  0.0-60.1 sec   710 MBytes  99.1 Mbits/sec
}}}

__Ten Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.1 sec  71.6 MBytes  10.0 Mbits/sec
[  6]  0.0-60.1 sec  72.6 MBytes  10.1 Mbits/sec
[  9]  0.0-60.1 sec  69.0 MBytes  9.63 Mbits/sec
[  4]  0.0-60.1 sec  72.5 MBytes  10.1 Mbits/sec
[  5]  0.0-60.2 sec  71.4 MBytes  9.95 Mbits/sec
[ 12]  0.0-60.2 sec  71.8 MBytes  10.0 Mbits/sec
[  7]  0.0-60.2 sec  70.6 MBytes  9.85 Mbits/sec
[  3]  0.0-60.2 sec  71.5 MBytes  9.97 Mbits/sec
[  8]  0.0-60.2 sec  72.4 MBytes  10.1 Mbits/sec
[ 10]  0.0-60.3 sec  71.1 MBytes  9.89 Mbits/sec
[SUM]  0.0-60.3 sec   714 MBytes  99.4 Mbits/sec
}}}

'''Iperf InstaGENI GPO VM to InstaGENI Wisconsin VM (UDP) - UDP buffer size:  224 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512773 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   677 MBytes  94.5 Mbits/sec   0.086 ms 29536/512772 (5.8%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order
}}}

'''Ping from InstaGENI GPO VM to InstaGENI Wisconsin VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59077ms
rtt min/avg/max/mdev = 36.943/37.114/37.573/0.258 ms
}}}


'''Iperf InstaGENI Wisconsin VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2013-11-21''

__One Client_
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   182 MBytes  25.4 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   139 MBytes  19.5 Mbits/sec
[  7]  0.0-60.0 sec   126 MBytes  17.5 Mbits/sec
[  6]  0.0-60.1 sec   144 MBytes  20.1 Mbits/sec
[  4]  0.0-60.1 sec   132 MBytes  18.4 Mbits/sec
[  3]  0.0-60.1 sec   146 MBytes  20.4 Mbits/sec
[SUM]  0.0-60.1 sec   687 MBytes  95.8 Mbits/sec
}}}

__Ten Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.1 sec  70.4 MBytes  9.82 Mbits/sec
[  9]  0.0-60.1 sec  71.0 MBytes  9.90 Mbits/sec
[  4]  0.0-60.1 sec  71.6 MBytes  9.99 Mbits/sec
[  6]  0.0-60.1 sec  71.8 MBytes  10.0 Mbits/sec
[ 12]  0.0-60.2 sec  70.9 MBytes  9.88 Mbits/sec
[  3]  0.0-60.2 sec  70.0 MBytes  9.76 Mbits/sec
[ 10]  0.0-60.2 sec  70.5 MBytes  9.83 Mbits/sec
[  7]  0.0-60.2 sec  70.9 MBytes  9.87 Mbits/sec
[ 11]  0.0-60.2 sec  70.2 MBytes  9.79 Mbits/sec
[  5]  0.0-60.2 sec  71.6 MBytes  9.97 Mbits/sec
[SUM]  0.0-60.2 sec   709 MBytes  98.7 Mbits/sec
}}}

'''Iperf InstaGENI Wisconsin VM to InstaGENI GPO VM (UDP)  - UDP buffer size:  224 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512645 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   688 MBytes  96.1 Mbits/sec   0.104 ms 21959/512644 (4.3%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order
}}}

'''Ping from InstaGENI Wisconsin VM to InstaGENI GPO VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59078ms
rtt min/avg/max/mdev = 36.947/37.177/37.730/0.195 ms
}}}

== IG-ST-2 New Site to GPO IG Loop topology ==

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Wisconsin/IG-ST-2.rspec IG-ST-2.rspec]:
{{{
$ omni.py createslice IG-ST-2
10:21:48 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
10:21:48 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
10:21:48 INFO     omni: Using control framework portal
10:21:49 INFO     omni: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-11-26 17:32:59
10:21:49 INFO     omni:  ------------------------------------------------------------
10:21:49 INFO     omni:  Completed createslice:
Args: createslice IG-ST-2

  Result Summary: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-11-26 17:32:59
 
10:21:49 INFO     omni:  ============================================================


$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
10:22:46 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
10:22:46 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
10:22:46 INFO     stitcher: Using control framework portal
10:22:46 INFO     stitcher: Checking that slice IG-ST-2 is valid...
10:22:47 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2 expires on 2013-11-26 17:32:59 UTC
10:22:48 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm> speaks AM API v3, but sticking with v2
10:22:48 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
10:22:48 INFO     stitcher: Stitched reservation will include resources from these aggregates:
10:22:48 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm>
10:22:48 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
10:22:48 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
10:22:48 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-wisc-edu.xml'
10:22:48 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.wisc.edu:12369/protogeni/xmlrpc/am
10:23:15 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm> complete.
10:23:15 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-gpolab-bbn-com.xml'
10:23:15 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
10:23:35 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
10:23:35 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-ion-internet2-edu.xml'
10:23:35 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
10:24:19 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
10:24:19 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
10:24:56 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
10:25:34 INFO     stitch.Aggregate: DCN circuit 50881 is ready
10:25:34 INFO     stitch.Aggregate: DCN circuit 50891 is ready
10:25:41 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
10:25:41 INFO     stitch.launcher: All aggregates are complete.
10:25:41 INFO     stitcher: Writing to 'IG-ST-2-manifest-rspec-stitching-combined.xml'
10:25:41 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-2-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 link(s).
}}}

Determined login information at each Wisconsin and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-2 -a wisconsin-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.wisc.edu:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-wisc's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-wisc using:
	ssh -p 33082  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.wisc.edu


$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 39482  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

}}}

Login to each host and ping the remote on each of the two interfaces.  Below is the ping output for the GPO site:
{{{
[lnevers@ig-gpo ~]$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59069ms
rtt min/avg/max/mdev = 36.836/37.532/75.166/4.905 ms

[lnevers@ig-gpo ~]$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59065ms
rtt min/avg/max/mdev = 36.736/37.555/82.499/5.855 ms
}}}

== IG-ST-3 IG-ST-3 New Site 3 node linear topology ==

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Wisconsin/IG-ST-3.rspec IG-ST-3.rspec]:
{{{
$ omni.py createslice IG-ST-3
10:39:12 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
10:39:12 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
10:39:12 INFO     omni: Using control framework portal
10:39:13 INFO     omni: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3, Expiration 2013-11-26 17:40:19
10:39:13 INFO     omni:  ------------------------------------------------------------
10:39:13 INFO     omni:  Completed createslice:
Args: createslice IG-ST-3

  Result Summary: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3, Expiration 2013-11-26 17:40:19
 
10:39:13 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
10:40:06 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
10:40:06 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
10:40:06 INFO     stitcher: Using control framework portal
10:40:07 INFO     stitcher: Checking that slice IG-ST-3 is valid...
10:40:08 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3 expires on 2013-11-26 17:40:19 UTC
10:40:09 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm> speaks AM API v3, but sticking with v2
10:40:09 INFO     stitcher: <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
10:40:09 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
10:40:09 INFO     stitcher: <Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
10:40:09 INFO     stitcher: Stitched reservation will include resources from these aggregates:
10:40:09 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm>
10:40:09 INFO     stitcher: 	<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm>
10:40:09 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
10:40:09 INFO     stitcher: 	<Aggregate urn:publicid:IDN+emulab.net+authority+cm>
10:40:09 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
10:40:09 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-wisc-edu.xml'
10:40:09 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.wisc.edu:12369/protogeni/xmlrpc/am
10:40:25 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm> complete.
10:40:25 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-gpolab-bbn-com.xml'
10:40:25 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
10:40:39 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
10:40:39 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-emulab-net.xml'
10:40:39 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
10:41:26 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete.
10:41:26 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-utah-geniracks-net.xml'
10:41:26 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
10:41:40 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete.
10:41:40 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-ion-internet2-edu.xml'
10:41:40 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
10:42:24 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
10:42:24 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
10:43:01 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
10:43:38 INFO     stitch.Aggregate: DCN circuit 50951 is ready
10:43:38 INFO     stitch.Aggregate: DCN circuit 50941 is ready
10:43:44 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
10:43:44 INFO     stitch.launcher: All aggregates are complete.
10:43:44 INFO     stitcher: Writing to 'IG-ST-3-manifest-rspec-stitching-combined.xml'
10:43:44 INFO     stitcher: Saved combined reservation RSpec at 5 AMs to file IG-ST-3-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 link(s).
}}}

Determined login information the Wisconsin host:
{{{
$ readyToLogin.py IG-ST-3 -a wisconsin-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.wisc.edu:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

wisc's geni_status is: ready (am_status:ready) 
User lnevers logs in to wisc using:
	ssh -p 33082  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.wisc.edu
}}}
Login to the Wisconsin host and ping each remote: 
{{{
#ping GPO IG 
[lnevers@wisc ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59108ms
rtt min/avg/max/mdev = 36.697/37.498/77.143/5.162 ms

# Utah IG
[lnevers@wisc ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59088ms
rtt min/avg/max/mdev = 81.536/83.308/164.477/10.576 ms

}}}



== IG-ST-4 New Site to GPO EG interoperability ==
Create a slice and then create the stitched slivers with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Wisconsin/IG-ST-4.rspec IG-ST-4.rspec]:
{{{
$ omni.py createslice IG-ST-4
15:58:14 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
15:58:14 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
15:58:14 INFO     omni: Using control framework emulab
15:58:22 INFO     omni: Created slice with Name IG-ST-4, URN urn:publicid:IDN+emulab.net+slice+IG-ST-4, Expiration 2013-11-21 22:15:03+00:00
15:58:22 INFO     omni:  ------------------------------------------------------------
15:58:22 INFO     omni:  Completed createslice:
Args: createslice IG-ST-4

  Result Summary: Created slice with Name IG-ST-4, URN urn:publicid:IDN+emulab.net+slice+IG-ST-4, Expiration 2013-11-21 22:15:03+00:00
 
15:58:22 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
15:58:32 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
15:58:32 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
15:58:32 INFO     stitcher: Using control framework emulab
15:58:33 INFO     stitcher: Checking that slice IG-ST-4 is valid...
15:58:40 WARNING  stitcher: Slice urn:publicid:IDN+emulab.net+slice+IG-ST-4 expires in <= 3 hours on 2013-11-21 22:15:03 UTC
15:58:41 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm> speaks AM API v3, but sticking with v2
15:58:41 INFO     stitcher: Stitched reservation will include resources from these aggregates:
15:58:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm>
15:58:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>
15:58:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
15:58:41 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-instageni-wisc-edu.xml'
15:58:41 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.wisc.edu:12369/protogeni/xmlrpc/am
15:58:42 WARNING  omni: Slice urn:publicid:IDN+emulab.net+slice+IG-ST-4 expires in <= 3 hours
15:58:59 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.wisc.edu+authority+cm> complete.
15:58:59 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-exogeni-net-bbnvmsite.xml'
15:58:59 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni.renci.org:11443/orca/xmlrpc
15:59:00 WARNING  omni: Slice urn:publicid:IDN+emulab.net+slice+IG-ST-4 expires in <= 3 hours
15:59:07 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
15:59:07 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3741
15:59:07 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
15:59:07 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3741
15:59:07 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
15:59:07 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3741
15:59:07 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am> complete.
15:59:07 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-ion-internet2-edu.xml'
15:59:07 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
15:59:07 WARNING  omni: Slice urn:publicid:IDN+emulab.net+slice+IG-ST-4 expires in <= 3 hours
15:59:50 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
15:59:50 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
16:00:21 WARNING  omni: Slice urn:publicid:IDN+emulab.net+slice+IG-ST-4 expires in <= 3 hours
16:00:28 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
16:00:58 WARNING  omni: Slice urn:publicid:IDN+emulab.net+slice+IG-ST-4 expires in <= 3 hours
16:01:05 INFO     stitch.Aggregate: DCN circuit 50751 is ready
16:01:05 WARNING  omni: Slice urn:publicid:IDN+emulab.net+slice+IG-ST-4 expires in <= 3 hours
16:01:11 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
16:01:11 INFO     stitch.launcher: All aggregates are complete.
16:01:11 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
16:01:11 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
16:01:11 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
16:01:11 ERROR    stitcher: Manifest RSpec file did not contain a Manifest RSpec (wrong type or schema)
16:01:11 INFO     stitcher: Writing to 'IG-ST-4-manifest-rspec-stitching-combined.xml'
16:01:11 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-4-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 link(s).

}}}

Determined login information at each Wisconsin and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-4 -a wisconsin-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.wisc.edu:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-wisc's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-wisc using:
	ssh -p 33082  -i /home/lnevers/.ssh/id_rsa lnevers@pc3.instageni.wisc.edu

$ readyToLogin.py IG-ST-4 -a gpo-eg
  ....
================================================================================
LOGIN INFO for AM: https://geni.renci.org:11443/orca/xmlrpc
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

eg-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/id_rsa lnevers@192.1.242.20

}}}

=== Measurements ===

'''Iperf ExoGENI GPO VM to InstaGENI Wisconsin VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2013-11-21''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf ExoGENI GPO VM to InstaGENI Wisconsin VM (UDP) - UDP buffer size:  224 KByte (default) '''
{{{

}}}

'''Ping from ExoGENI GPO VM to InstaGENI Wisconsin VM '''
{{{

}}}


'''Iperf InstaGENI Wisconsin VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2013-XX-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf InstaGENI Wisconsin VM to ExoGENI GPO VM (UDP)  - UDP buffer size:  224 KByte (default) '''
{{{

}}}

'''Ping from InstaGENI Wisconsin VM to ExoGENI GPO VM '''
{{{

}}}