Version 7 (modified by 7 years ago) (diff) | ,
---|
Virginia Commonwealth University Stitching Confirmation Tests
This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.
IG-ST-1 New Site to GPO IG topology
The VCU site advertises the following stitching details:
<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2017-07-29T15:15:05Z" > <aggregate id="urn:publicid:IDN+vcu.instageni.net+authority+cm" url="https://www.vcu.instageni.net:12369/protoge ni/xmlrpc/am"> <aggregatetype>protogeni</aggregatetype> <stitchingmode>chainANDTree</stitchingmode> <scheduledservices>false</scheduledservices> <negotiatedservices>false</negotiatedservices> <lifetime id="life"> <start type="time">2017-07-29T15:15:05Z</start> <end type="time">2017-07-29T15:15:05Z</end> </lifetime> <node id="urn:publicid:IDN+vcu.instageni.net+node+procurve2"> <port id="urn:publicid:IDN+vcu.instageni.net+stitchport+procurve2:1.24.al2s"> <capacity>10000000</capacity> <maximumReservableCapacity>10000000</maximumReservableCapacity> <minimumReservableCapacity>1000</minimumReservableCapacity> <granularity>1</granularity> <link id="urn:publicid:IDN+vcu.instageni.net+interface+procurve2:1.24.al2s"> <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.ashb.net.internet2.edu:et-3/0/0.0:vcu-ig</remoteLinkId> <trafficEngineeringMetric>10</trafficEngineeringMetric> <capacity>10000000</capacity> <maximumReservableCapacity>10000000</maximumReservableCapacity> <minimumReservableCapacity>1000</minimumReservableCapacity> <granularity>1</granularity> <switchingCapabilityDescriptor> <switchingcapType>l2sc</switchingcapType> <encodingType>ethernet</encodingType> <switchingCapabilitySpecificInfo> <switchingCapabilitySpecificInfo_L2sc> <interfaceMTU>1500</interfaceMTU> <vlanRangeAvailability>3001-3020</vlanRangeAvailability> <vlanTranslation>false</vlanTranslation> </switchingCapabilitySpecificInfo_L2sc> </switchingCapabilitySpecificInfo> </switchingCapabilityDescriptor> </link> </port> </node> </aggregate> </stitching>
Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.
Create a slice and then create the stitched slivers with the RSpec IG-ST-1.rspec:
$ stitcher.py createsliver IG-ST-1x IG-ST-1.rspec -o 13:41:07 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 13:41:07 INFO : Reading slice IG-ST-1 credential... 13:41:07 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2017-10-04 17:41:06 UTC 13:41:07 INFO : Calling SCS... 13:41:09 INFO : Multi-AM reservation will include resources from these aggregates: 13:41:09 INFO : <Aggregate vcu-ig> 13:41:09 INFO : <Aggregate gpo-ig> 13:41:09 INFO : <Aggregate al2s> 13:41:09 INFO : Stitcher doing createsliver at <Aggregate vcu-ig>... 13:41:38 INFO : ... Allocation at <Aggregate vcu-ig> complete. 13:41:38 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 13:42:16 INFO : ... Allocation at <Aggregate gpo-ig> complete. 13:42:16 INFO : Stitcher doing createsliver at <Aggregate al2s>... 13:42:20 INFO : ... Allocation at <Aggregate al2s> complete. 13:42:20 INFO : All aggregates are complete. 13:42:20 INFO : Your resources expire at 2017-10-03T17:31:09 (UTC). 13:42:20 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/VCU/IG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
Determined login information at each VCU and GPO aggregate:
$ readyToLogin.py IG-ST-1 --useSliceAggregates .... ig-vcu's geni_status is: ready User lnevers logs in to ig-vcu using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.vcu.instageni.net ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 27394 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com
Measurements
Iperf InstaGENI GPO VM to InstaGENI VCU VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-09-27
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 685 MBytes 95.8 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 136 MBytes 19.1 Mbits/sec [ 7] 0.0-60.1 sec 140 MBytes 19.6 Mbits/sec [ 4] 0.0-60.1 sec 135 MBytes 18.9 Mbits/sec [ 6] 0.0-60.1 sec 157 MBytes 21.9 Mbits/sec [ 3] 0.0-60.2 sec 114 MBytes 15.9 Mbits/sec [SUM] 0.0-60.2 sec 684 MBytes 95.2 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 80.1 MBytes 11.2 Mbits/sec [ 4] 0.0-60.1 sec 70.4 MBytes 9.83 Mbits/sec [ 5] 0.0-60.1 sec 74.1 MBytes 10.3 Mbits/sec [ 6] 0.0-60.1 sec 66.6 MBytes 9.29 Mbits/sec [ 7] 0.0-60.2 sec 70.2 MBytes 9.79 Mbits/sec [ 8] 0.0-60.2 sec 67.1 MBytes 9.36 Mbits/sec [ 12] 0.0-60.2 sec 66.2 MBytes 9.23 Mbits/sec [ 10] 0.0-60.2 sec 67.9 MBytes 9.45 Mbits/sec [ 9] 0.0-60.3 sec 64.2 MBytes 8.94 Mbits/sec [ 11] 0.0-60.3 sec 60.4 MBytes 8.40 Mbits/sec [SUM] 0.0-60.3 sec 687 MBytes 95.6 Mbits/sec
Iperf InstaGENI GPO VM to InstaGENI VCU VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512814 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 693 MBytes 96.8 Mbits/sec 0.023 ms 18687/512813 (3.6%)
Ping from InstaGENI GPO VM to the InstaGENI VCU VM
60 packets transmitted, 60 received, 0% packet loss, time 59110ms rtt min/avg/max/mdev = 13.589/13.810/14.682/0.224 ms
Iperf InstaGENI VCU VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-09-27
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 687 MBytes 95.9 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 96.9 MBytes 13.5 Mbits/sec [ 3] 0.0-60.0 sec 166 MBytes 23.2 Mbits/sec [ 7] 0.0-60.1 sec 160 MBytes 22.4 Mbits/sec [ 5] 0.0-60.1 sec 138 MBytes 19.2 Mbits/sec [ 6] 0.0-60.2 sec 125 MBytes 17.5 Mbits/sec [SUM] 0.0-60.2 sec 686 MBytes 95.7 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 11] 0.0-59.0 sec 63.9 MBytes 9.08 Mbits/sec [ 4] 0.0-59.0 sec 74.1 MBytes 10.5 Mbits/sec [ 6] 0.0-59.1 sec 65.2 MBytes 9.27 Mbits/sec [ 7] 0.0-59.1 sec 78.6 MBytes 11.2 Mbits/sec [ 8] 0.0-59.3 sec 67.5 MBytes 9.55 Mbits/sec [ 10] 0.0-59.3 sec 55.8 MBytes 7.88 Mbits/sec [ 9] 0.0-59.4 sec 68.2 MBytes 9.65 Mbits/sec [ 3] 0.0-59.3 sec 66.6 MBytes 9.42 Mbits/sec [ 12] 0.0-60.0 sec 69.0 MBytes 9.65 Mbits/sec [ 5] 0.0-60.1 sec 71.9 MBytes 10.0 Mbits/sec [SUM] 0.0-60.1 sec 681 MBytes 95.0 Mbits/sec
Iperf InstaGENI VCU VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512795 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 694 MBytes 97.0 Mbits/sec 0.036 ms 17712/512794 (3.5%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order
Ping from InstaGENI VCU VM to GPO InstaGENI VM
60 packets transmitted, 60 received, 0% packet loss, time 59110ms rtt min/avg/max/mdev = 13.712/13.832/14.244/0.174 ms
IG-ST-2 New Site to GPO IG Loop topology
Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:
$ stitcher createslice IG-ST-2; stitcher createsliver IG-ST-2 ./IG-ST-2.rspec -o 14:00:30 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 14:00:30 INFO : Reading slice IG-ST-2 aggregates from file /home/lnevers/.gcf/ch-geni-net-ln-test-IG-ST-2-amlist.txt 14:00:30 INFO : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache' 14:00:30 INFO : Loading config file '/home/lnevers/.gcf/omni_config' 14:00:30 INFO : Using control framework portal 14:00:30 INFO : Member Authority is https://ch.geni.net/MA (from config) 14:00:30 INFO : Slice Authority is https://ch.geni.net/SA (from config) 14:00:31 INFO : Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2, Expiration 2017-10-04 18:00:30+00:00 Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2, Expiration 2017-10-04 18:00:30+00:00 14:00:31 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 14:00:31 INFO : Reading slice IG-ST-2 credential... 14:00:31 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2017-10-04 18:00:30 UTC 14:00:31 INFO : Calling SCS... 14:00:32 INFO : Multi-AM reservation will include resources from these aggregates: 14:00:32 INFO : <Aggregate vcu-ig> 14:00:32 INFO : <Aggregate gpo-ig> 14:00:32 INFO : <Aggregate al2s> 14:00:32 INFO : Stitcher doing createsliver at <Aggregate vcu-ig>... 14:01:01 INFO : ... Allocation at <Aggregate vcu-ig> complete. 14:01:02 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 14:01:25 INFO : ... Allocation at <Aggregate gpo-ig> complete. 14:01:25 INFO : Stitcher doing createsliver at <Aggregate al2s>... 14:01:34 INFO : ... Allocation at <Aggregate al2s> complete. 14:01:34 INFO : All aggregates are complete. 14:01:34 INFO : Your resources expire at 2017-10-03T17:50:32 (UTC). 14:01:34 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/VCU/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
Determined login information at each VCU and GPO aggregate:
$ readyToLogin.py IG-ST-2 --useSliceAggregates ... ig-vcu's geni_status is: ready User lnevers logs in to ig-vcu using: ssh -p 25434 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.vcu.instageni.net ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 26794 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:
$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2 Key file [/home/lnevers/.ssh/arendia-id_rsa] does NOT exist. Key file [/home/lnevers/.ssh/sendaria-id_rsa] does NOT exist. Key file [/home/lnevers/.ssh/lnevers-id_rsa] does NOT exist. 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59111ms rtt min/avg/max/mdev = 13.701/14.052/27.653/1.778 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59109ms rtt min/avg/max/mdev = 13.728/14.125/27.721/1.786 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo $
IG-ST-3 IG-ST-3 New Site 3 node linear topology
Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:
$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 14:02:03 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 14:02:03 INFO : Reading slice IG-ST-3 credential... 14:02:03 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2017-10-04 18:02:02 UTC 14:02:03 INFO : Calling SCS... 14:02:05 INFO : Multi-AM reservation will include resources from these aggregates: 14:02:05 INFO : <Aggregate cwru-ig> 14:02:05 INFO : <Aggregate vcu-ig> 14:02:05 INFO : <Aggregate al2s> 14:02:05 INFO : <Aggregate gpo-ig> 14:02:05 INFO : Stitcher doing createsliver at <Aggregate cwru-ig>... 14:02:37 INFO : ... Allocation at <Aggregate cwru-ig> complete. 14:02:37 INFO : Stitcher doing createsliver at <Aggregate vcu-ig>... 14:03:04 INFO : ... Allocation at <Aggregate vcu-ig> complete. 14:03:04 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 14:03:30 INFO : ... Allocation at <Aggregate gpo-ig> complete. 14:03:30 INFO : Stitcher doing createsliver at <Aggregate al2s>... 14:03:44 INFO : ... Allocation at <Aggregate al2s> complete. 14:03:44 INFO : All aggregates are complete. 14:03:44 INFO : Your resources expire at 2017-10-03T17:52:05 (UTC). 14:03:44 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/VCU/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s)
Determined login information the VCU host:
$ readyToLogin.py IG-ST-3 --useSliceAggregates ... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 27594 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com ig-vcu's geni_status is: ready User lnevers logs in to ig-vcu using: ssh -p 25634 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.vcu.instageni.net
Login to the VCU host and ping each remote:
#ping GPO IG lnevers@ig-vcu:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 42 received, +18 errors, 30% packet loss, time 59174ms rtt min/avg/max/mdev = 13.749/38.090/1025.351/154.185 ms, pipe 3 lnevers@ig-vcu:~$ # UKYPKS2 IG lnevers@ig-vcu:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59075ms rtt min/avg/max/mdev = 11.018/11.338/22.326/1.432 ms lnevers@ig-vcu:~$
IG-ST-4 New Site to GPO EG interoperability
Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.
$ 14:09:54 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 14:09:54 INFO : Reading slice IG-ST-4v credential... 14:09:54 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4v expires on 2017-10-04 18:09:53 UTC 14:09:54 INFO : Calling SCS... 14:09:54 INFO : Multi-AM reservation will include resources from these aggregates: 14:09:54 INFO : <Aggregate vcu-ig> 14:09:54 INFO : <Aggregate al2s> 14:09:54 INFO : <Aggregate gpo-eg> 14:09:55 INFO : Stitcher doing createsliver at <Aggregate vcu-ig>... 14:10:23 INFO : ... Allocation at <Aggregate vcu-ig> complete. 14:10:23 INFO : Stitcher doing createsliver at <Aggregate gpo-eg>... 14:10:32 INFO : ... Allocation at <Aggregate gpo-eg> complete. 14:10:32 INFO : Stitcher doing createsliver at <Aggregate al2s>... 14:10:38 INFO : ... Allocation at <Aggregate al2s> complete. 14:10:38 INFO : All aggregates are complete. 14:10:38 INFO : Your resources expire at 2017-10-03T17:59:55 (UTC). 14:10:38 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/VCU/IG-ST-4v-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4v at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
Determined login information at each VCU and GPO aggregate:
$ readyToLogin.py IG-ST-4v --useSliceAggregates .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.6 ig-vcu's geni_status is: ready User lnevers logs in to ig-vcu using: ssh -p 26034 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.vcu.instageni.net
Measurements
Iperf ExoGENI GPO VM to InstaGENI VCU VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-09-27
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 137 MBytes 19.2 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 31.2 MBytes 4.37 Mbits/sec [ 6] 0.0-60.1 sec 22.9 MBytes 3.19 Mbits/sec [ 7] 0.0-60.2 sec 30.9 MBytes 4.30 Mbits/sec [ 5] 0.0-60.2 sec 25.1 MBytes 3.50 Mbits/sec [ 3] 0.0-60.3 sec 28.9 MBytes 4.02 Mbits/sec [SUM] 0.0-60.3 sec 139 MBytes 19.3 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 8] 0.0-60.0 sec 17.6 MBytes 2.46 Mbits/sec [ 11] 0.0-60.3 sec 12.8 MBytes 1.77 Mbits/sec [ 6] 0.0-60.6 sec 19.2 MBytes 2.67 Mbits/sec [ 4] 0.0-60.7 sec 15.6 MBytes 2.16 Mbits/sec [ 9] 0.0-60.9 sec 11.1 MBytes 1.53 Mbits/sec [ 3] 0.0-61.0 sec 15.6 MBytes 2.15 Mbits/sec [ 12] 0.0-61.1 sec 13.6 MBytes 1.87 Mbits/sec [ 5] 0.0-61.1 sec 10.4 MBytes 1.42 Mbits/sec [ 7] 0.0-61.4 sec 16.8 MBytes 2.29 Mbits/sec [ 10] 0.0-62.1 sec 10.0 MBytes 1.35 Mbits/sec [SUM] 0.0-62.1 sec 143 MBytes 19.3 Mbits/sec
Iperf ExoGENI GPO VM to InstaGENI VCU VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 0.037 ms 413318/512817 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order
Ping from ExoGENI GPO VM to the InstaGENI VCU VM
60 packets transmitted, 60 received, 0% packet loss, time 59112ms rtt min/avg/max/mdev = 13.640/13.811/14.505/0.142 ms
Iperf InstaGENI VCU VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-09-27
One Client_
Five Clients
Ten Clients
Iperf InstaGENI VCU VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default)
Ping from InstaGENI VCU VM to ExoGENI GPO VM
IG-ST-5 Site Information
Various pages include stitching information for a site. Each of the following were verified for this site:
- Verified that stitching VLANs and Device URN information exists in the VCU Aggregate page.
- Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
Stitching Computation Service logs were reviewed while testing stitching to this site,No longer possible.
- Added site to the list of GENI Network Stitching Sites.
IG-ST-6 New Site OpenFlow topology
Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:
omni.py createslice IG-ST-6 stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
Determined login information at each VCU and NYSENet aggregate:
$ readyToLogin.py IG-ST-6 --useSliceAggregates
Measurements
Iperf InstaGENI NYSENet VM to InstaGENI VCU VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-07-xx
One Client_
Five Clients
Ten Clients
Iperf InstaGENI NYSENet VM to InstaGENI VCU VM (UDP) - UDP buffer size: 208 KByte (default)
Ping from InstaGENI NYSENet VM to InstaGENI VCU VM
Iperf InstaGENI VCU VM to InstaGENI NYSENet VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-07-xx
One Client_
Five Clients
Ten Clients
Iperf InstaGENI VCU VM to InstaGENI NYSENet VM (UDP) - UDP buffer size: 208 KByte (default)
Ping from InstaGENI VCU VM to InstaGENI NYSENet VM
Email help@geni.net for GENI support or email me with feedback on this page!