[[PageOutline]] = University of Utah !CloudLab Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == CL-ST-1 New Site to GPO IG topology == The !CloudLab site advertises the following stitching details on 2015-05-21: {{{ protogeni chainANDTree false false 2015-05-21T15:20:44Z 2015-05-21T15:20:44Z 1000000 1000000 1000 1 urn:publicid:IDN+stitch.geniracks.net+interface+scidmz:2.4 10 1000000 1000000 1000 1 l2sc ethernet 1500 2100-3499 false }}} The !CloudLab site stitching advertisement was capture again on 2015-10-01 and these are the only differences, which are due to link capacity increasing in the later Ad: {{{ 13,14c13,14 < 1000000 < 1000000 --- > 40000000 > 40000000 20,21c20,21 < 1000000 < 1000000 --- > 40000000 > 40000000 }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. __2015-10-01 Test Run__ A sliver was created just as with the May test run: {{{ $ stitcher createsliver CL-ST-1 ./CL-ST-1.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:30:05 INFO : Configured logging from file /home/lnevers/gcf-2.9/src/gcf/stitcher_logging.conf 09:30:05 INFO : Reading slice CL-ST-1 credential... 09:30:05 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-1 expires on 2015-10-08 13:29:36 UTC 09:30:05 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:30:05 INFO : Calling SCS... 09:30:14 INFO : Multi-AM reservation will include resources from these aggregates: 09:30:14 INFO : 09:30:14 INFO : 09:30:14 INFO : 09:30:14 INFO : 09:30:14 INFO : Gathering currently available VLAN tags at ... 09:30:18 INFO : Stitcher doing createsliver at ... 09:31:10 INFO : ... Allocation at complete. 09:31:10 INFO : Stitcher doing createsliver at ... 09:31:36 INFO : ... Allocation at complete. 09:31:36 INFO : Stitcher doing createsliver at ... 09:31:54 INFO : ... Allocation at complete. 09:31:54 INFO : Stitcher doing createsliver at ... 09:31:56 ERROR : {'output': 'Exception: requested VLAN unavailable: sdn-sw.newy32aoa.net.internet2.edu,eth5/2 VLAN=3707', 'code': {'geni_code': 24}} 09:31:56 INFO : Deleting some reservations to retry, avoiding failed VLAN... 09:31:56 INFO : Doing deletesliver at ... 09:32:19 INFO : Will put back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at .... 09:32:19 INFO : Pausing for 30 seconds for Aggregates to free up resources... 09:32:49 INFO : Checking that prior reservation at has been cleared up.... 09:32:50 ERROR : {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+6ae6928254646bf314fe999060cda427', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=6ae6928254646bf314fe999060cda427'}, 'value': 0} 09:32:50 INFO : ... it is, so can try a new reservation. 09:32:50 INFO : Stitcher doing createsliver at ... 09:33:05 INFO : ... Allocation at complete. 09:33:05 INFO : Stitcher doing createsliver at ... 09:33:09 INFO : ... Allocation at complete. 09:33:09 INFO : All aggregates are complete. 09:33:09 INFO : Your resources expire at 2015-10-06T13:20:18 (UTC). 09:33:09 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Utah-CloudLab/CONFIRMATION/CL-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice CL-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determine Login for allocated compute resources: {{{ $ readyToLogin --useSliceAggregates CL-ST-1 .... utah-clab's geni_status is: ready User lnevers logs in to utah-clab using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@ms0333.utah.cloudlab.us ... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to Utah !CloudLab Raw-PC (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-10-01'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 44.9 MBytes 6.27 Mbits/sec [ 5] 0.0-60.0 sec 31.8 MBytes 4.44 Mbits/sec [ 6] 0.0-60.1 sec 20.6 MBytes 2.88 Mbits/sec [ 7] 0.0-60.2 sec 18.1 MBytes 2.53 Mbits/sec [ 3] 0.0-61.1 sec 28.4 MBytes 3.90 Mbits/sec [SUM] 0.0-61.1 sec 144 MBytes 19.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 11] 0.0-60.0 sec 16.2 MBytes 2.27 Mbits/sec [ 10] 0.0-60.1 sec 18.9 MBytes 2.64 Mbits/sec [ 6] 0.0-60.2 sec 13.8 MBytes 1.91 Mbits/sec [ 9] 0.0-60.4 sec 17.4 MBytes 2.41 Mbits/sec [ 8] 0.0-60.5 sec 12.1 MBytes 1.68 Mbits/sec [ 12] 0.0-60.5 sec 10.1 MBytes 1.40 Mbits/sec [ 7] 0.0-60.8 sec 11.5 MBytes 1.59 Mbits/sec [ 4] 0.0-61.0 sec 15.2 MBytes 2.10 Mbits/sec [ 5] 0.0-61.1 sec 11.8 MBytes 1.61 Mbits/sec [ 3] 0.0-61.5 sec 18.4 MBytes 2.51 Mbits/sec [SUM] 0.0-61.5 sec 145 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI GPO VM to Utah !CloudLab Raw-PC (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512802 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.577 ms 413462/512800 (81%) }}} '''Ping from InstaGENI GPO VM to the Utah !CloudLab Raw-PC ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59021ms rtt min/avg/max/mdev = 58.846/59.293/62.167/0.674 ms }}} '''Iperf Utah !CloudLab Raw-PC to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-10-01'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 138 MBytes 19.2 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.3 sec 28.1 MBytes 3.91 Mbits/sec [ 4] 0.0-60.4 sec 28.1 MBytes 3.91 Mbits/sec [ 7] 0.0-60.5 sec 28.8 MBytes 3.99 Mbits/sec [ 5] 0.0-60.7 sec 28.0 MBytes 3.87 Mbits/sec [ 3] 0.0-60.7 sec 28.1 MBytes 3.89 Mbits/sec [SUM] 0.0-60.7 sec 141 MBytes 19.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 14.5 MBytes 2.02 Mbits/sec [ 12] 0.0-60.1 sec 14.4 MBytes 2.01 Mbits/sec [ 7] 0.0-60.5 sec 14.2 MBytes 1.98 Mbits/sec [ 9] 0.0-60.5 sec 14.2 MBytes 1.98 Mbits/sec [ 10] 0.0-60.7 sec 14.2 MBytes 1.97 Mbits/sec [ 6] 0.0-60.7 sec 14.4 MBytes 1.99 Mbits/sec [ 4] 0.0-61.0 sec 14.4 MBytes 1.98 Mbits/sec [ 8] 0.0-61.3 sec 14.5 MBytes 1.98 Mbits/sec [ 11] 0.0-61.4 sec 14.4 MBytes 1.96 Mbits/sec [ 5] 0.0-61.5 sec 14.5 MBytes 1.98 Mbits/sec [SUM] 0.0-61.5 sec 144 MBytes 19.6 Mbits/sec }}} '''Iperf Utah !CloudLab Raw-PC to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 133 MBytes 18.6 Mbits/sec [ 3] Sent 94830 datagrams [ 3] Server Report: [ 3] 0.0-59.6 sec 133 MBytes 18.7 Mbits/sec 2.267 ms 0/94829 (0%) [ 3] 0.0-59.6 sec 1 datagrams received out-of-order }}} '''Ping from Utah !CloudLab Raw-PC to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59076ms rtt min/avg/max/mdev = 58.749/59.314/61.148/0.513 ms }}} __2015-05-21 Test Run__ Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Utah-CloudLab/CL-ST-1.rspec CL-ST-1.rspec]: {{{ $ stitcher createsliver CL-ST-1a ./CL-ST-1.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 11:35:12 INFO : Configured logging from file /home/lnevers/gcf-2.9-rc4/src/gcf/stitcher_logging.conf 11:35:12 INFO : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache' 11:35:12 INFO : Loading config file '/home/lnevers/.gcf/omni_config' 11:35:12 INFO : Using control framework portal 11:35:12 INFO : Member Authority is https://ch.geni.net/MA (from config) 11:35:12 INFO : Slice Authority is https://ch.geni.net/SA (from config) 11:35:12 INFO : Created slice with Name CL-ST-1a, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-1a, Expiration 2015-05-28 15:35:12+00:00 Created slice with Name CL-ST-1a, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-1a, Expiration 2015-05-28 15:35:12+00:00 11:35:13 INFO : Configured logging from file /home/lnevers/gcf-2.9-rc4/src/gcf/stitcher_logging.conf 11:35:13 INFO : Reading slice CL-ST-1a credential... 11:35:13 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-1a expires on 2015-05-28 15:35:12 UTC 11:35:13 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 11:35:13 INFO : Calling SCS... 11:35:14 INFO : Multi-AM reservation will include resources from these aggregates: 11:35:14 INFO : 11:35:14 INFO : 11:35:14 INFO : 11:35:14 INFO : 11:35:14 INFO : Gathering currently available VLAN tags at ... 11:35:18 INFO : Stitcher doing createsliver at ... 11:35:37 INFO : ... Allocation at complete. 11:35:37 INFO : Stitcher doing createsliver at ... 11:36:00 INFO : ... Allocation at complete. 11:36:00 INFO : Stitcher doing createsliver at ... 11:36:17 INFO : ... Allocation at complete. 11:36:17 INFO : Stitcher doing createsliver at ... 11:36:22 INFO : ... Allocation at complete. 11:36:22 INFO : All aggregates are complete. 11:36:22 INFO : Your resources expire at 2015-05-26T15:25:18 (UTC). 11:36:22 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Utah-CloudLab/CL-ST-1a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice CL-ST-1a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each !CloudLab and GPO aggregate: {{{ $ readyToLogin.py CL-ST-1a --useSliceAggregates .... utah-clab's geni_status is: ready User lnevers logs in to utah-clab using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@ms0643.utah.cloudlab.us ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 33850 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to Utah !CloudLab Raw-PC (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-05-21'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 27.6 MBytes 3.86 Mbits/sec [ 5] 0.0-60.1 sec 34.4 MBytes 4.79 Mbits/sec [ 3] 0.0-60.2 sec 22.4 MBytes 3.12 Mbits/sec [ 6] 0.0-60.3 sec 21.4 MBytes 2.97 Mbits/sec [ 7] 0.0-60.4 sec 38.6 MBytes 5.36 Mbits/sec [SUM] 0.0-60.4 sec 144 MBytes 20.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.1 sec 22.6 MBytes 3.16 Mbits/sec [ 11] 0.0-60.2 sec 18.1 MBytes 2.52 Mbits/sec [ 12] 0.0-60.7 sec 11.5 MBytes 1.59 Mbits/sec [ 5] 0.0-60.8 sec 13.4 MBytes 1.85 Mbits/sec [ 6] 0.0-60.8 sec 12.9 MBytes 1.78 Mbits/sec [ 3] 0.0-61.0 sec 13.0 MBytes 1.79 Mbits/sec [ 10] 0.0-61.1 sec 12.2 MBytes 1.68 Mbits/sec [ 9] 0.0-61.3 sec 12.0 MBytes 1.64 Mbits/sec [ 8] 0.0-61.4 sec 11.6 MBytes 1.59 Mbits/sec [ 7] 0.0-61.6 sec 16.6 MBytes 2.26 Mbits/sec [SUM] 0.0-61.6 sec 144 MBytes 19.6 Mbits/sec }}} '''Iperf InstaGENI GPO VM to Utah !CloudLab Raw-PC (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512805 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.627 ms 413492/512804 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the Utah !CloudLab Raw-PC ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59038ms rtt min/avg/max/mdev = 58.901/59.336/60.264/0.388 ms }}} '''Iperf Utah !CloudLab Raw-PC to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-05-21'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 138 MBytes 19.2 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.1 sec 28.5 MBytes 3.98 Mbits/sec [ 5] 0.0-60.3 sec 27.9 MBytes 3.88 Mbits/sec [ 4] 0.0-60.4 sec 28.1 MBytes 3.91 Mbits/sec [ 7] 0.0-60.4 sec 28.0 MBytes 3.89 Mbits/sec [ 3] 0.0-60.5 sec 28.0 MBytes 3.88 Mbits/sec [SUM] 0.0-60.5 sec 140 MBytes 19.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 9] 0.0-60.1 sec 14.2 MBytes 1.99 Mbits/sec [ 12] 0.0-60.2 sec 14.5 MBytes 2.02 Mbits/sec [ 11] 0.0-60.3 sec 14.2 MBytes 1.98 Mbits/sec [ 3] 0.0-60.3 sec 14.1 MBytes 1.96 Mbits/sec [ 6] 0.0-60.4 sec 14.2 MBytes 1.98 Mbits/sec [ 5] 0.0-60.6 sec 14.6 MBytes 2.03 Mbits/sec [ 7] 0.0-60.6 sec 14.2 MBytes 1.97 Mbits/sec [ 4] 0.0-60.7 sec 14.4 MBytes 1.99 Mbits/sec [ 10] 0.0-61.1 sec 14.5 MBytes 1.99 Mbits/sec [ 8] 0.0-61.4 sec 14.5 MBytes 1.98 Mbits/sec [SUM] 0.0-61.4 sec 144 MBytes 19.6 Mbits/sec }}} '''Iperf Utah !CloudLab Raw-PC to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 133 MBytes 18.6 Mbits/sec [ 3] Sent 94724 datagrams [ 3] Server Report: [ 3] 0.0-59.7 sec 133 MBytes 18.7 Mbits/sec 2.227 ms 0/94723 (0%) [ 3] 0.0-59.7 sec 1 datagrams received out-of-order }}} '''Ping from Utah !CloudLab Raw-PC to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59073ms rtt min/avg/max/mdev = 58.908/59.293/60.015/0.340 ms }}} == CL-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Utah-CloudLab/CL-ST-2.rspec CL-ST-2.rspec]: {{{ $ stitcher.py createsliver CL-ST-2 CL-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 15:23:51 INFO : Configured logging from file /home/lnevers/gcf-2.9-rc4/src/gcf/stitcher_logging.conf 15:23:51 INFO : Reading slice CL-ST-2 credential... 15:23:52 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-2 expires on 2015-05-30 00:00:00 UTC 15:23:52 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 15:23:52 INFO : Calling SCS... 15:23:53 INFO : Multi-AM reservation will include resources from these aggregates: 15:23:53 INFO : 15:23:53 INFO : 15:23:53 INFO : 15:23:53 INFO : 15:23:53 INFO : Gathering currently available VLAN tags at ... 15:23:57 INFO : Stitcher doing createsliver at ... 15:24:18 INFO : ... Allocation at complete. 15:24:18 INFO : Stitcher doing createsliver at ... 15:24:33 INFO : ... Allocation at complete. 15:24:33 INFO : Stitcher doing createsliver at ... 15:24:53 INFO : ... Allocation at complete. 15:24:53 INFO : Stitcher doing createsliver at ... 15:25:00 INFO : ... Allocation at complete. 15:25:00 INFO : All aggregates are complete. 15:25:00 INFO : Your resources expire at 2015-05-26T19:13:57 (UTC). 15:25:00 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Utah-CloudLab/CL-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice CL-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each !CloudLab and GPO aggregate: {{{ $ readyToLogin.py CL-ST-2 --useSliceAggregates .... utah-clab's geni_status is: ready User lnevers logs in to utah-clab using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@ms0724.utah.cloudlab.us ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 30266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ remote-execute.py CL-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice CL-ST-2 Key file [/home/lnevers/.ssh/lnevers-id_rsa] does NOT exist. 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 59 received, 1% packet loss, time 59098ms rtt min/avg/max/mdev = 58.635/58.868/59.369/0.209 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59098ms rtt min/avg/max/mdev = 58.602/59.863/118.061/7.582 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo }}} == CL-ST-3 CL-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Utah-CloudLab/CL-ST-3.rspec CL-ST-3.rspec]: {{{ $ stitcher.py createsliver CL-ST-3 CL-ST-3.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 15:24:09 INFO : Configured logging from file /home/lnevers/gcf-2.9-rc4/src/gcf/stitcher_logging.conf 15:24:09 INFO : Reading slice CL-ST-3 credential... 15:24:09 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-3 expires on 2015-05-28 17:13:26 UTC 15:24:09 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 15:24:09 INFO : Calling SCS... 15:24:11 INFO : Multi-AM reservation will include resources from these aggregates: 15:24:11 INFO : 15:24:11 INFO : 15:24:11 INFO : 15:24:11 INFO : 15:24:11 INFO : 15:24:11 INFO : Gathering currently available VLAN tags at ... 15:24:14 INFO : Gathering currently available VLAN tags at ... 15:24:17 INFO : Stitcher doing createsliver at ... 15:24:38 INFO : ... Allocation at complete. 15:24:38 INFO : Stitcher doing createsliver at ... 15:24:59 INFO : ... Allocation at complete. 15:24:59 INFO : Stitcher doing createsliver at ... 15:25:04 INFO : ... Allocation at complete. 15:25:04 INFO : Stitcher doing createsliver at ... 15:25:23 INFO : ... Allocation at complete. 15:25:23 INFO : Stitcher doing createsliver at ... 15:25:38 INFO : ... Allocation at complete. 15:25:38 INFO : All aggregates are complete. 15:25:38 INFO : Your resources expire at 2015-05-26T19:14:17 (UTC). 15:25:38 INFO : Saved combined reservation RSpec at 5 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Utah-CloudLab/CL-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice CL-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the !CloudLab host: {{{ $ readyToLogin.py CL-ST-3 -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 32570 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com ig-utah's geni_status is: ready User lnevers logs in to ig-utah using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.utah.geniracks.net }}} Login to the !CloudLab host and ping each remote: {{{ #ping GPO IG [lnevers@ig-gpo ~]$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 58999ms rtt min/avg/max/mdev = 0.019/0.020/0.034/0.004 ms [lnevers@ig-gpo ~]$ # Utah IG [lnevers@ig-gpo ~]$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 0 received, 100% packet loss, time 58999ms [lnevers@ig-gpo ~]$ }}} == CL-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Utah-CloudLab/CL-ST-4.rspec CL-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher.py createsliver CL-ST-4 ./CL-ST-4.rspec -o --scsURL https://nutshell.maxgi gapop.net:8443/geni/xmlrpc 13:27:19 INFO : Configured logging from file /home/lnevers/gcf-2.9-rc4/src/gcf/stitcher_logging.conf 13:27:20 INFO : Reading slice CL-ST-4 credential... 13:27:20 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-4 expires on 2015-05-28 17:26:08 UTC 13:27:20 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:27:20 INFO : Calling SCS... 13:27:21 INFO : Multi-AM reservation will include resources from these aggregates: 13:27:21 INFO : 13:27:21 INFO : 13:27:21 INFO : 13:27:21 INFO : 13:27:21 INFO : Gathering currently available VLAN tags at ... 13:27:25 INFO : Stitcher doing createsliver at ... 13:27:44 INFO : ... Allocation at complete. 13:27:44 INFO : Stitcher doing createsliver at ... 13:27:54 INFO : ... Allocation at complete. 13:27:54 INFO : Stitcher doing createsliver at ... 13:28:10 INFO : ... Allocation at complete. 13:28:11 INFO : Stitcher doing createsliver at ... 13:28:15 INFO : ... Allocation at complete. 13:28:15 INFO : All aggregates are complete. 13:28:15 INFO : Your resources expire at 2015-05-26T17:17:25 (UTC). 13:28:15 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Utah-CloudLab/CL-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice CL-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each !CloudLab and GPO aggregate: {{{ $ readyToLogin.py CL-ST-4 --useSliceAggregates .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.6 utah-clab's geni_status is: ready User lnevers logs in to utah-clab using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@ms0222.utah.cloudlab.us }}} === Measurements === '''Iperf ExoGENI GPO VM to Utah !CloudLab Raw-PC (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2015-05-21'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 712 MBytes 99.4 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 134 MBytes 18.7 Mbits/sec [ 6] 0.0-60.1 sec 130 MBytes 18.2 Mbits/sec [ 5] 0.0-60.2 sec 183 MBytes 25.5 Mbits/sec [ 7] 0.0-60.2 sec 95.0 MBytes 13.2 Mbits/sec [ 4] 0.0-60.4 sec 170 MBytes 23.7 Mbits/sec [SUM] 0.0-60.4 sec 712 MBytes 99.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 9] 0.0-60.0 sec 74.0 MBytes 10.3 Mbits/sec [ 3] 0.0-60.0 sec 64.8 MBytes 9.05 Mbits/sec [ 11] 0.0-60.1 sec 62.0 MBytes 8.66 Mbits/sec [ 4] 0.0-60.1 sec 76.8 MBytes 10.7 Mbits/sec [ 12] 0.0-60.1 sec 52.8 MBytes 7.36 Mbits/sec [ 5] 0.0-60.2 sec 97.0 MBytes 13.5 Mbits/sec [ 7] 0.0-60.2 sec 53.1 MBytes 7.40 Mbits/sec [ 10] 0.0-60.2 sec 55.0 MBytes 7.66 Mbits/sec [ 8] 0.0-60.2 sec 64.5 MBytes 8.98 Mbits/sec [ 6] 0.0-60.3 sec 91.8 MBytes 12.8 Mbits/sec [SUM] 0.0-60.3 sec 692 MBytes 96.3 Mbits/sec }}} '''Iperf ExoGENI GPO VM to Utah !CloudLab Raw-PC (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512822 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 697 MBytes 97.5 Mbits/sec 0.131 ms 15523/512821 (3%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI GPO VM to the Utah !CloudLab Raw-PC ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59082ms rtt min/avg/max/mdev = 58.990/59.335/60.313/0.359 ms }}} '''Iperf Utah !CloudLab Raw-PC to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-05-21'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 684 MBytes 95.4 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.1 sec 137 MBytes 19.1 Mbits/sec [ 6] 0.0-60.0 sec 137 MBytes 19.1 Mbits/sec [ 5] 0.0-60.1 sec 137 MBytes 19.1 Mbits/sec [ 4] 0.0-60.2 sec 138 MBytes 19.2 Mbits/sec [ 3] 0.0-60.2 sec 137 MBytes 19.1 Mbits/sec [SUM] 0.0-60.2 sec 685 MBytes 95.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 9] 0.0-60.0 sec 69.0 MBytes 9.64 Mbits/sec [ 7] 0.0-60.0 sec 69.0 MBytes 9.64 Mbits/sec [ 6] 0.0-60.1 sec 69.1 MBytes 9.66 Mbits/sec [ 4] 0.0-60.1 sec 69.1 MBytes 9.65 Mbits/sec [ 8] 0.0-60.1 sec 69.1 MBytes 9.65 Mbits/sec [ 3] 0.0-60.2 sec 69.4 MBytes 9.67 Mbits/sec [ 11] 0.0-60.2 sec 69.2 MBytes 9.64 Mbits/sec [ 5] 0.0-60.3 sec 69.4 MBytes 9.65 Mbits/sec [ 10] 0.0-60.3 sec 69.4 MBytes 9.65 Mbits/sec [ 12] 0.0-60.3 sec 69.5 MBytes 9.67 Mbits/sec [SUM] 0.0-60.3 sec 692 MBytes 96.3 Mbits/sec }}} '''Iperf Utah !CloudLab Raw-PC to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 688 MBytes 96.2 Mbits/sec [ 3] Sent 490843 datagrams [ 3] Server Report: [ 3] 0.0-59.9 sec 688 MBytes 96.3 Mbits/sec 0.053 ms 0/490842 (0%) [ 3] 0.0-59.9 sec 1 datagrams received out-of-order }}} '''Ping from Utah !CloudLab Raw-PC to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59077ms rtt min/avg/max/mdev = 59.010/59.344/59.730/0.211 ms }}} == CL-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/UtahCloudLab Utah CloudLab] Aggregate page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. No longer have access to Stitching Computation Service logs to review testing stitching for this site. 4. To Be Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == CL-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Utah-CloudLab/CL-ST-6.rspec CL-ST-6.rspec]: {{{ $ stitcher createsliver CL-ST-6 ./CL-ST-6.rspec --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:51:45 INFO : Configured logging from file /home/lnevers/gcf-2.9-rc4/src/gcf/stitcher_logging.conf 13:51:45 INFO : Reading slice CL-ST-6 credential... 13:51:46 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-6 expires on 2015-05-28 17:50:49 UTC 13:51:46 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:51:46 INFO : Calling SCS... 13:51:47 INFO : Multi-AM reservation will include resources from these aggregates: 13:51:47 INFO : 13:51:47 INFO : 13:51:47 INFO : 13:51:47 INFO : 13:51:47 INFO : Gathering currently available VLAN tags at ... 13:51:50 INFO : Stitcher doing createsliver at ... 13:52:11 INFO : ... Allocation at complete. 13:52:11 INFO : Stitcher doing createsliver at ... 13:52:25 INFO : ... Allocation at complete. 13:52:25 INFO : Stitcher doing createsliver at ... 13:52:42 INFO : ... Allocation at complete. 13:52:42 INFO : Stitcher doing createsliver at ... 13:52:46 INFO : ... Allocation at complete. 13:52:46 INFO : All aggregates are complete. 13:52:46 INFO : Your resources expire at 2015-05-26T17:41:50 (UTC). 13:52:46 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Utah-CloudLab/CL-ST-6-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice CL-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each !CloudLab and GPO aggregate: {{{ $ readyToLogin.py CL-ST-6 --useSliceAggregates .... utah-clab's geni_status is: ready User lnevers logs in to utah-clab using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@ms0130.utah.cloudlab.us ig-gpo's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 34618 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com }}} '''NOTE: BLOCKED due to Utah-stitch not supporting OF.''' == CL-ST-7 Multiple !CloudLab Sites Topology == This test case sets up a stitched topology that connects all 3 !CloudLab sites (Utah, Clemson, Wisconsin) in a triangle topology: Clemson<->Utah<->Wisconsin<->Clemson The sliver creation: {{{ $stitcher createsliver CL-ST-7 ./CL-ST-7.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:38:53 INFO : Configured logging from file /home/lnevers/gcf-2.9/src/gcf/stitcher_logging.conf 09:38:54 INFO : Reading slice CL-ST-7 credential... 09:38:54 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-7 expires on 2015-10-08 13:38:53 UTC 09:38:54 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:38:54 INFO : Calling SCS... 09:38:57 INFO : Multi-AM reservation will include resources from these aggregates: 09:38:57 INFO : 09:38:57 INFO : 09:38:57 INFO : 09:38:57 INFO : 09:38:57 INFO : 09:38:57 INFO : Gathering currently available VLAN tags at ... 09:39:02 INFO : Stitcher doing createsliver at ... 09:39:24 INFO : ... Allocation at complete. 09:39:24 INFO : Stitcher doing createsliver at ... 09:40:18 INFO : ... Allocation at complete. 09:40:18 INFO : Stitcher doing createsliver at ... 09:40:59 INFO : ... Allocation at complete. 09:40:59 INFO : Stitcher doing createsliver at ... 09:41:21 INFO : ... Allocation at complete. 09:41:21 INFO : Stitcher doing createsliver at ... 09:41:32 INFO : ... Allocation at complete. 09:41:32 INFO : All aggregates are complete. 09:41:32 INFO : Your resources expire at 2015-10-06T13:29:02 (UTC). 09:41:32 INFO : Saved combined reservation RSpec at 5 AM(s) to file '/home/lnevers/gcf-test/stitch-test/CloudLab/CL-ST-7-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice CL-ST-7 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 3 stitched link(s). }}} Determine the login information for all 3 sites: {{{ $ readyToLogin --useSliceAggregates CL-ST-7 ... wi-cl's geni_status is: ready User lnevers logs in to wi-cl using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc-c220m4-r02-07.wisc.cloudlab.us ... ut-cl's geni_status is: ready User lnevers logs in to ut-cl using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@ms0622.utah.cloudlab.us ... cl-cl's geni_status is: ready User lnevers logs in to cl-cl using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@clnode094.clemson.cloudlab.us }}} === Measurements === '''Iperf Utah !CloudLab Raw-PC to Clemson !CloudLab Raw-pc (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-10-01'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 138 MBytes 19.2 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.1 sec 28.0 MBytes 3.91 Mbits/sec [ 3] 0.0-60.1 sec 28.0 MBytes 3.91 Mbits/sec [ 5] 0.0-60.3 sec 28.1 MBytes 3.92 Mbits/sec [ 4] 0.0-60.5 sec 28.2 MBytes 3.92 Mbits/sec [ 7] 0.0-60.6 sec 28.2 MBytes 3.91 Mbits/sec [SUM] 0.0-60.6 sec 141 MBytes 19.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.1 sec 14.5 MBytes 2.02 Mbits/sec [ 7] 0.0-60.1 sec 14.2 MBytes 1.99 Mbits/sec [ 9] 0.0-60.2 sec 14.1 MBytes 1.97 Mbits/sec [ 4] 0.0-60.3 sec 14.5 MBytes 2.02 Mbits/sec [ 10] 0.0-60.6 sec 14.5 MBytes 2.01 Mbits/sec [ 11] 0.0-60.8 sec 14.2 MBytes 1.97 Mbits/sec [ 5] 0.0-60.9 sec 14.4 MBytes 1.98 Mbits/sec [ 6] 0.0-61.0 sec 14.4 MBytes 1.98 Mbits/sec [ 8] 0.0-61.2 sec 14.4 MBytes 1.97 Mbits/sec [ 3] 0.0-61.3 sec 14.5 MBytes 1.98 Mbits/sec [SUM] 0.0-61.3 sec 144 MBytes 19.7 Mbits/sec }}} '''Iperf Utah !CloudLab Raw-pc to Clemson !CloudLab Raw-pc (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 133 MBytes 18.6 Mbits/sec [ 3] Sent 94726 datagrams [ 3] Server Report: [ 3] 0.0-59.6 sec 133 MBytes 18.7 Mbits/sec 2.147 ms 0/94725 (0%) [ 3] 0.0-59.6 sec 1 datagrams received out-of-order }}} '''Ping from Utah !CloudLab Raw-pc to Clemson !CloudLab Raw-pc ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59080ms rtt min/avg/max/mdev = 51.831/52.103/52.520/0.205 ms }}} '''Iperf Utah !CloudLab Raw-pc to Wisconsin Raw-pc (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-10-01'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 139 MBytes 19.4 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-61.1 sec 29.8 MBytes 4.08 Mbits/sec [ 3] 0.0-61.2 sec 29.8 MBytes 4.08 Mbits/sec [ 5] 0.0-61.3 sec 29.8 MBytes 4.07 Mbits/sec [ 6] 0.0-61.3 sec 29.8 MBytes 4.07 Mbits/sec [ 4] 0.0-61.7 sec 30.1 MBytes 4.10 Mbits/sec [SUM] 0.0-61.7 sec 149 MBytes 20.3 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-61.7 sec 15.4 MBytes 2.09 Mbits/sec [ 4] 0.0-61.7 sec 15.4 MBytes 2.09 Mbits/sec [ 3] 0.0-61.8 sec 15.4 MBytes 2.09 Mbits/sec [ 9] 0.0-62.0 sec 15.4 MBytes 2.08 Mbits/sec [ 7] 0.0-62.0 sec 15.4 MBytes 2.08 Mbits/sec [ 11] 0.0-62.3 sec 15.5 MBytes 2.09 Mbits/sec [ 8] 0.0-62.4 sec 15.5 MBytes 2.08 Mbits/sec [ 5] 0.0-62.4 sec 15.5 MBytes 2.08 Mbits/sec [ 6] 0.0-62.7 sec 15.8 MBytes 2.11 Mbits/sec [ 10] 0.0-62.7 sec 15.5 MBytes 2.07 Mbits/sec [SUM] 0.0-62.7 sec 155 MBytes 20.7 Mbits/sec }}} '''Iperf Utah !CloudLab Raw-pc to Wisconsin Raw-pc (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 118 MBytes 16.4 Mbits/sec [ 3] Sent 83818 datagrams [ 3] Server Report: [ 3] 0.0-59.6 sec 118 MBytes 16.5 Mbits/sec 2.255 ms 0/83817 (0%) [ 3] 0.0-59.6 sec 1 datagrams received out-of-order }}} '''Ping from Utah !CloudLab Raw-pc to Wisconsin Raw-pc ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59099ms rtt min/avg/max/mdev = 36.626/36.823/37.202/0.220 ms }}} '''Iperf Wisconsin !CloudLab Raw-PC to Clemson !CloudLab Raw-pc (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-10-01'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 137 MBytes 19.1 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.3 sec 27.6 MBytes 3.85 Mbits/sec [ 4] 0.0-60.3 sec 27.6 MBytes 3.85 Mbits/sec [ 6] 0.0-60.3 sec 27.6 MBytes 3.84 Mbits/sec [ 3] 0.0-60.4 sec 27.6 MBytes 3.84 Mbits/sec [ 7] 0.0-60.4 sec 27.6 MBytes 3.84 Mbits/sec [SUM] 0.0-60.4 sec 138 MBytes 19.2 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.5 sec 13.9 MBytes 1.92 Mbits/sec [ 5] 0.0-60.9 sec 14.0 MBytes 1.93 Mbits/sec [ 6] 0.0-60.9 sec 14.0 MBytes 1.93 Mbits/sec [ 12] 0.0-60.9 sec 14.0 MBytes 1.93 Mbits/sec [ 3] 0.0-60.9 sec 14.0 MBytes 1.93 Mbits/sec [ 8] 0.0-61.0 sec 14.0 MBytes 1.93 Mbits/sec [ 7] 0.0-61.0 sec 14.0 MBytes 1.92 Mbits/sec [ 11] 0.0-61.1 sec 14.0 MBytes 1.92 Mbits/sec [ 9] 0.0-61.1 sec 14.0 MBytes 1.92 Mbits/sec [ 10] 0.0-61.1 sec 14.0 MBytes 1.92 Mbits/sec [SUM] 0.0-61.1 sec 140 MBytes 19.2 Mbits/sec }}} '''Iperf Wisconsin !CloudLab Raw-pc to Clemson !CloudLab Raw-pc (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ 3] local 192.168.5.2 port 54914 connected with 192.168.5.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 139 MBytes 19.4 Mbits/sec [ 3] Sent 98850 datagrams [ 3] Server Report: [ 3] 0.0-59.9 sec 139 MBytes 19.4 Mbits/sec 2.265 ms 0/98849 (0%) [ 3] 0.0-59.9 sec 1 datagrams received out-of-order }}} '''Ping from Wisconsin !CloudLab Raw-pc to Clemson !CloudLab Raw-pc ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59080ms rtt min/avg/max/mdev = 25.920/26.027/26.232/0.230 ms }}} == CL-ST-8 Multiple !CloudLab Sites With OF == This test takes the triangle topology from the previous test case CL-ST-7 and adds !OpenFlow to each link. {{{ $ stitcher createsliver CL-ST-8 ./CL-ST-8.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:55:51 INFO : Configured logging from file /home/lnevers/gcf-2.9/src/gcf/stitcher_logging.conf 10:55:51 INFO : Reading slice CL-ST-8 credential... 10:55:51 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+CL-ST-8 expires on 2015-10-08 14:53:37 UTC 10:55:51 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:55:51 INFO : Calling SCS... 10:55:52 INFO : Multi-AM reservation will include resources from these aggregates: 10:55:52 INFO : 10:55:52 INFO : 10:55:52 INFO : 10:55:52 INFO : 10:55:52 INFO : 10:55:52 INFO : Gathering currently available VLAN tags at ... 10:55:56 INFO : Stitcher doing createsliver at ... 10:56:10 INFO : ... Allocation at complete. 10:56:10 INFO : Stitcher doing createsliver at ... 10:57:04 INFO : ... Allocation at complete. 10:57:04 INFO : Stitcher doing createsliver at ... 10:57:43 INFO : ... Allocation at complete. 10:57:43 INFO : Stitcher doing createsliver at ... 10:58:04 INFO : ... Allocation at complete. 10:58:04 INFO : Stitcher doing createsliver at ... 10:58:17 INFO : ... Allocation at complete. 10:58:17 INFO : All aggregates are complete. 10:58:17 INFO : Your resources expire at 2015-10-06T14:45:56 (UTC). 10:58:17 INFO : Saved combined reservation RSpec at 5 AM(s) to file '/home/lnevers/gcf-test/stitch-test/CloudLab/CL-ST-8-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice CL-ST-8 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 3 stitched link(s). }}} Determine login for each site: {{{ $ readyToLogin --useSliceAggregates CL-ST-8 ... wi-cl's geni_status is: ready User lnevers logs in to wi-cl using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc-c220m4-r02-17.wisc.cloudlab.us ... ut-cl's geni_status is: ready User lnevers logs in to ut-cl using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@ms0116.utah.cloudlab.us ... cl-cl's geni_status is: ready User lnevers logs in to cl-cl using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@clnode050.clemson.cloudlab.us }}} ------ {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}