Changes between Version 7 and Version 8 of GeniNetworkStitchingConfirmationTestStatus/Utah
- Timestamp:
- 05/21/15 14:37:43 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GeniNetworkStitchingConfirmationTestStatus/Utah
v7 v8 157 157 rtt min/avg/max/mdev = 58.901/59.336/60.264/0.388 ms 158 158 }}} 159 == CL-ST-4 New Site to GPO EG interoperability ==160 161 162 Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Utah-CloudLab/CL-ST-4.rspec CL-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.163 164 {{{165 omni.py createslice CL-ST-4166 stitcher.py createsliver CL-ST-4 CL-ST-4.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc167 }}}168 169 Determined login information at each !CloudLab and GPO aggregate:170 {{{171 $ readyToLogin.py CL-ST-4 --useSliceAggregates172 ....173 }}}174 175 159 176 160 '''Iperf Utah !CloudLab Raw-PC to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' … … 322 306 }}} 323 307 308 == CL-ST-4 New Site to GPO EG interoperability == 309 324 310 Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Utah-CloudLab/CL-ST-4.rspec CL-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. 325 311