wiki:GeniNetworkStitchingConfirmationTestStatus/UWashington

Version 7 (modified by lnevers@bbn.com, 9 years ago) (diff)

--

University of Washington Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The Washington site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2015-02-12T15:36:03Z" >
<aggregate id="urn:publicid:IDN+instageni.washington.edu+authority+cm" url="https://www.instageni.washington.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2015-02-12T15:36:03Z</start>
    <end type="time">2015-02-12T15:36:03Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.washington.edu+node+procurve2">
  <port id="urn:publicid:IDN+instageni.washington.edu+stitchport+procurve2:2.1.al2s">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.washington.edu+interface+procurve2:2.1.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.seat.net.internet2.edu:et-3/0/0.0:uwashington-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>2301-2315</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:

$ stitcher createsliver IG-ST-1 IG-ST-1-al2s.rspec -o --scsURL http://nutshell.maxgigapop.net:8081/geni/xmlrpc
12:55:30 INFO    : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf
12:55:30 INFO    : Reading slice IG-ST-1 credential...
12:55:30 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-02-26 19:45:19 UTC
12:55:30 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
12:55:30 INFO    : Calling SCS...
12:55:31 INFO    : Multi-AM reservation will include resources from these aggregates:
12:55:31 INFO    : 	<Aggregate uwashington-ig>
12:55:31 INFO    : 	<Aggregate gpo-ig>
12:55:31 INFO    : 	<Aggregate al2s>
12:55:31 INFO    : 	<Aggregate ion>
12:55:31 INFO    : Stitcher doing createsliver at <Aggregate uwashington-ig>...
12:55:49 INFO    : ... Allocation at <Aggregate uwashington-ig> complete.
12:55:49 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
12:56:03 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
12:56:03 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
12:56:07 INFO    : ... Allocation at <Aggregate al2s> complete.
12:56:07 INFO    : Stitcher doing createsliver at <Aggregate ion>...
12:56:54 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
12:56:54 INFO    : Pausing 30 seconds to let circuit become ready...
12:57:32 INFO    : DCN circuit 154191 is ready at <Aggregate ion>
12:57:39 INFO    : ... Allocation at <Aggregate ion> complete.
12:57:39 INFO    : All aggregates are complete.
12:57:39 INFO    : Your resources expire at 2015-02-26T17:45:31 (UTC). 
12:57:39 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Washington and GPO aggregate:

$ readyToLogin.py IG-ST-1 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 31802  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

 ....
ig-wash's geni_status is: ready 
User lnevers logs in to ig-wash using:
	ssh -p 30010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.washington.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI Washington VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-02-20

One Client_

Five Clients

Ten Clients

Iperf InstaGENI GPO VM to InstaGENI Washington VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI GPO VM to the InstaGENI Washington VM

Iperf InstaGENI Washington VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-02-XX

One Client_

Five Clients

Ten Clients

Iperf InstaGENI Washington VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI Washington VM to GPO InstaGENI VM

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:53:58 INFO    : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf
13:53:58 INFO    : Reading slice IG-ST-2 credential...
13:53:58 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-02-27 14:59:00 UTC
13:53:58 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:53:58 INFO    : Calling SCS...
13:54:01 INFO    : Multi-AM reservation will include resources from these aggregates:
13:54:01 INFO    : 	<Aggregate uwashington-ig>
13:54:01 INFO    : 	<Aggregate gpo-ig>
13:54:01 INFO    : 	<Aggregate al2s>
13:54:01 INFO    : 	<Aggregate ion>
13:54:01 INFO    : Stitcher doing createsliver at <Aggregate uwashington-ig>...
13:54:20 INFO    : ... Allocation at <Aggregate uwashington-ig> complete.
13:54:20 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:54:36 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:54:36 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:54:43 INFO    : ... Allocation at <Aggregate al2s> complete.
13:54:43 INFO    : Stitcher doing createsliver at <Aggregate ion>...
13:55:28 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
13:55:28 INFO    : Pausing 30 seconds to let circuit become ready...
13:56:06 INFO    : Pausing 30 seconds to let circuit become ready...
13:56:43 INFO    : DCN circuit 154201 is ready at <Aggregate ion>
13:56:43 INFO    : DCN circuit 154211 is ready at <Aggregate ion>
13:56:51 INFO    : ... Allocation at <Aggregate ion> complete.
13:56:51 INFO    : All aggregates are complete.
13:56:51 INFO    : Your resources expire at 2015-02-26T18:44:01 (UTC). 
13:56:51 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each Washington and GPO aggregate:

$ readyToLogin.py IG-ST-2 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 32570  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
 ....
ig-wash's geni_status is: ready 
User lnevers logs in to ig-wash using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2
Key file [/home/lnevers/.ssh/arendia-id_rsa] does NOT exist.
Key file [/home/lnevers/.ssh/sendaria-id_rsa] does NOT exist.
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo

PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 69.229/69.590/69.991/0.284 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59100ms
rtt min/avg/max/mdev = 69.298/69.653/71.446/0.318 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher createsliver IG-ST-3 ./IG-ST-3.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:54:12 INFO    : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf
13:54:12 INFO    : Reading slice IG-ST-3 credential...
13:54:12 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2015-02-27 15:09:51 UTC
13:54:12 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:54:12 INFO    : Calling SCS...
13:54:17 INFO    : Multi-AM reservation will include resources from these aggregates:
13:54:17 INFO    : 	<Aggregate ukypks2-ig>
13:54:17 INFO    : 	<Aggregate gpo-ig>
13:54:17 INFO    : 	<Aggregate al2s>
13:54:17 INFO    : 	<Aggregate uwashington-ig>
13:54:17 INFO    : 	<Aggregate ion>
13:54:18 INFO    : Stitcher doing createsliver at <Aggregate ukypks2-ig>...
13:54:36 INFO    : ... Allocation at <Aggregate ukypks2-ig> complete.
13:54:36 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:54:55 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:54:55 INFO    : Stitcher doing createsliver at <Aggregate uwashington-ig>...
13:55:15 INFO    : ... Allocation at <Aggregate uwashington-ig> complete.
13:55:15 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:55:22 INFO    : ... Allocation at <Aggregate al2s> complete.
13:55:23 INFO    : Stitcher doing createsliver at <Aggregate ion>...
13:56:08 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
13:56:08 INFO    : Pausing 30 seconds to let circuit become ready...
13:56:45 INFO    : Pausing 30 seconds to let circuit become ready...
13:57:23 INFO    : DCN circuit 154231 is ready at <Aggregate ion>
13:57:23 INFO    : DCN circuit 154221 is ready at <Aggregate ion>
13:57:30 INFO    : ... Allocation at <Aggregate ion> complete.
13:57:30 INFO    : All aggregates are complete.
13:57:30 INFO    : Your resources expire at 2015-02-26T18:44:17 (UTC). 
13:57:30 INFO    : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the Washington host:

$ readyToLogin.py IG-ST-3 --useSliceAggregates
  ....
ig-pks's geni_status is: ready 
User lnevers logs in to ig-pks using:
	ssh -p 30522  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.pks2.sdn.uky.edu
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 37178  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
  ....
ig-wash's geni_status is: ready 
User lnevers logs in to ig-wash using:
	ssh -p 30522  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.washington.edu

Login to the Washington host and ping each remote:

#ping GPO IG 
lnevers@ig-wash:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.


--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59041ms
rtt min/avg/max/mdev = 69.165/70.721/139.427/8.954 ms

# UKYPKS2 IG
lnevers@ig-wash:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59104ms
rtt min/avg/max/mdev = 72.434/73.973/149.469/9.835 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher createsliver IG-ST-4 ./IG-ST-4.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:57:29 INFO    : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf
13:57:29 INFO    : Reading slice IG-ST-4 credential...
13:57:29 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-02-27 15:12:00 UTC
13:57:29 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:57:29 INFO    : Calling SCS...
13:57:31 INFO    : Multi-AM reservation will include resources from these aggregates:
13:57:31 INFO    : 	<Aggregate uwashington-ig>
13:57:31 INFO    : 	<Aggregate al2s>
13:57:31 INFO    : 	<Aggregate gpo-eg>
13:57:31 INFO    : 	<Aggregate ion>
13:57:31 INFO    : Stitcher doing createsliver at <Aggregate uwashington-ig>...
13:57:50 INFO    : ... Allocation at <Aggregate uwashington-ig> complete.
13:57:50 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
13:58:05 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
13:58:05 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:58:09 INFO    : ... Allocation at <Aggregate al2s> complete.
13:58:09 INFO    : Stitcher doing createsliver at <Aggregate ion>...
13:58:54 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
13:58:54 INFO    : Pausing 30 seconds to let circuit become ready...
13:59:33 INFO    : DCN circuit 154241 is ready at <Aggregate ion>
13:59:41 INFO    : ... Allocation at <Aggregate ion> complete.
13:59:41 INFO    : All aggregates are complete.
13:59:41 INFO    : Your resources expire at 2015-02-26T18:47:31 (UTC). 
13:59:41 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Washington and GPO aggregate:

$ readyToLogin.py IG-ST-4 --useSliceAggregates
  ....
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.11
  ....
ig-wash's geni_status is: ready 
User lnevers logs in to ig-wash using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.washington.edu

Measurements

Iperf ExoGENI GPO VM to InstaGENI Washington VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2015-02-20

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   138 MBytes  19.2 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  29.1 MBytes  4.07 Mbits/sec
[  4]  0.0-60.3 sec  28.2 MBytes  3.93 Mbits/sec
[  6]  0.0-60.5 sec  28.9 MBytes  4.00 Mbits/sec
[  7]  0.0-60.7 sec  28.4 MBytes  3.92 Mbits/sec
[  5]  0.0-60.9 sec  29.4 MBytes  4.05 Mbits/sec
[SUM]  0.0-60.9 sec   144 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.1 sec  20.5 MBytes  2.86 Mbits/sec
[ 11]  0.0-60.4 sec  14.4 MBytes  2.00 Mbits/sec
[ 10]  0.0-61.0 sec  13.9 MBytes  1.91 Mbits/sec
[  5]  0.0-61.1 sec  14.4 MBytes  1.97 Mbits/sec
[ 12]  0.0-61.2 sec  11.4 MBytes  1.56 Mbits/sec
[  7]  0.0-61.2 sec  14.9 MBytes  2.04 Mbits/sec
[  6]  0.0-61.2 sec  14.4 MBytes  1.97 Mbits/sec
[  4]  0.0-61.4 sec  15.4 MBytes  2.10 Mbits/sec
[  9]  0.0-61.4 sec  14.8 MBytes  2.01 Mbits/sec
[  3]  0.0-61.5 sec  14.1 MBytes  1.93 Mbits/sec
[SUM]  0.0-61.5 sec   148 MBytes  20.2 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI Washington VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec   0.108 ms 413473/512820 (81%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI Washington VM

60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 69.244/69.869/76.086/0.945 ms

Iperf InstaGENI Washington VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-02-20

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   137 MBytes  19.1 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-59.3 sec  29.4 MBytes  4.15 Mbits/sec
[  5]  0.0-59.5 sec  25.2 MBytes  3.56 Mbits/sec
[  4]  0.0-59.9 sec  24.2 MBytes  3.40 Mbits/sec
[  7]  0.0-60.1 sec  41.0 MBytes  5.72 Mbits/sec
[  3]  0.0-60.4 sec  19.8 MBytes  2.74 Mbits/sec
[SUM]  0.0-60.4 sec   140 MBytes  19.4 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.2 sec  13.9 MBytes  1.93 Mbits/sec
[ 12]  0.0-60.5 sec  11.4 MBytes  1.58 Mbits/sec
[ 11]  0.0-60.5 sec  14.1 MBytes  1.96 Mbits/sec
[  7]  0.0-60.6 sec  11.8 MBytes  1.63 Mbits/sec
[  3]  0.0-60.7 sec  12.0 MBytes  1.66 Mbits/sec
[  8]  0.0-60.8 sec  18.1 MBytes  2.50 Mbits/sec
[  9]  0.0-60.9 sec  14.5 MBytes  2.00 Mbits/sec
[  4]  0.0-61.1 sec  14.4 MBytes  1.97 Mbits/sec
[  6]  0.0-61.4 sec  10.0 MBytes  1.37 Mbits/sec
[  5]  0.0-61.9 sec  24.1 MBytes  3.27 Mbits/sec
[SUM]  0.0-61.9 sec   144 MBytes  19.6 Mbits/sec

Iperf InstaGENI Washington VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512750 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  14.633 ms 413552/512745 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI Washington VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 69.289/69.721/70.224/0.248 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the Washington Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. TO be Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
14:20:40 INFO    : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf
14:20:40 INFO    : Reading slice IG-ST-6 credential...
14:20:40 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2015-02-27 15:31:12 UTC
14:20:40 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
14:20:40 INFO    : Calling SCS...
14:20:42 INFO    : Multi-AM reservation will include resources from these aggregates:
14:20:42 INFO    : 	<Aggregate uwashington-ig>
14:20:42 INFO    : 	<Aggregate gpo-ig>
14:20:42 INFO    : 	<Aggregate al2s>
14:20:42 INFO    : 	<Aggregate ion>
14:20:42 INFO    : Stitcher doing createsliver at <Aggregate uwashington-ig>...
14:21:00 INFO    : ... Allocation at <Aggregate uwashington-ig> complete.
14:21:00 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
14:21:18 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
14:21:18 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
14:21:23 INFO    : ... Allocation at <Aggregate al2s> complete.
14:21:23 INFO    : Stitcher doing createsliver at <Aggregate ion>...
14:22:08 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
14:22:08 INFO    : Pausing 30 seconds to let circuit become ready...
14:22:45 INFO    : Pausing 30 seconds to let circuit become ready...
14:23:22 INFO    : DCN circuit 154251 is ready at <Aggregate ion>
14:23:29 INFO    : ... Allocation at <Aggregate ion> complete.
14:23:29 INFO    : All aggregates are complete.
14:23:29 INFO    : Your resources expire at 2015-02-26T19:10:42 (UTC). 
14:23:29 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-6-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Washington and GPO aggregate:

$ readyToLogin.py IG-ST-6 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 32570  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
 ...
ig-wash's geni_status is: ready 
User lnevers logs in to ig-wash using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.washington.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI Washington VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-02-20

One Client_

Five Clients

Ten Clients

Iperf InstaGENI GPO VM to InstaGENI Washington VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI GPO VM to InstaGENI Washington VM

Iperf InstaGENI Washington VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-02-20

One Client_

Five Clients

Ten Clients

Iperf InstaGENI Washington VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI Washington VM to InstaGENI GPO VM


Email help@geni.net for GENI support or email me with feedback on this page!