[[PageOutline]] = University of Washington Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The Washington site advertises the following stitching details: {{{ protogeni chainANDTree false false 2015-02-12T15:36:03Z 2015-02-12T15:36:03Z 1000000 1000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.seat.net.internet2.edu:et-3/0/0.0:uwashington-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 2301-2315 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Washington/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: {{{ $ stitcher createsliver IG-ST-1 IG-ST-1-al2s.rspec -o --scsURL http://nutshell.maxgigapop.net:8081/geni/xmlrpc 14:28:56 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 14:28:56 INFO : Reading slice IG-ST-1 credential... 14:28:56 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-02-26 19:45:19 UTC 14:28:56 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 14:28:56 INFO : Calling SCS... 14:28:58 INFO : Multi-AM reservation will include resources from these aggregates: 14:28:58 INFO : 14:28:58 INFO : 14:28:58 INFO : 14:28:58 INFO : 14:28:58 INFO : Stitcher doing createsliver at ... 14:29:15 INFO : ... Allocation at complete. 14:29:15 INFO : Stitcher doing createsliver at ... 14:29:31 INFO : ... Allocation at complete. 14:29:31 INFO : Stitcher doing createsliver at ... 14:29:36 INFO : ... Allocation at complete. 14:29:36 INFO : Stitcher doing createsliver at ... 14:30:21 INFO : DCN AM : must wait for status ready.... 14:30:21 INFO : Pausing 30 seconds to let circuit become ready... 14:30:58 INFO : Pausing 30 seconds to let circuit become ready... 14:31:36 INFO : DCN circuit 154261 is ready at 14:31:43 INFO : ... Allocation at complete. 14:31:43 INFO : All aggregates are complete. 14:31:43 INFO : Your resources expire at 2015-02-26T19:18:58 (UTC). 14:31:43 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Washington and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com .... ig-wash's geni_status is: ready User lnevers logs in to ig-wash using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.washington.edu }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI Washington VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 141 MBytes 19.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.2 sec 31.5 MBytes 4.39 Mbits/sec [ 7] 0.0-60.5 sec 30.5 MBytes 4.23 Mbits/sec [ 5] 0.0-60.8 sec 25.8 MBytes 3.56 Mbits/sec [ 3] 0.0-60.8 sec 29.6 MBytes 4.08 Mbits/sec [ 4] 0.0-60.9 sec 26.8 MBytes 3.68 Mbits/sec [SUM] 0.0-60.9 sec 144 MBytes 19.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.2 sec 17.2 MBytes 2.40 Mbits/sec [ 7] 0.0-60.5 sec 14.9 MBytes 2.06 Mbits/sec [ 3] 0.0-60.6 sec 14.1 MBytes 1.95 Mbits/sec [ 6] 0.0-60.7 sec 12.6 MBytes 1.75 Mbits/sec [ 4] 0.0-60.9 sec 14.9 MBytes 2.05 Mbits/sec [ 11] 0.0-60.9 sec 13.9 MBytes 1.91 Mbits/sec [ 10] 0.0-61.0 sec 11.9 MBytes 1.63 Mbits/sec [ 9] 0.0-61.6 sec 17.9 MBytes 2.44 Mbits/sec [ 8] 0.0-61.6 sec 16.2 MBytes 2.21 Mbits/sec [ 5] 0.0-62.1 sec 13.0 MBytes 1.76 Mbits/sec [SUM] 0.0-62.1 sec 147 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI Washington VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512807 datagrams [ 3] Server Report: [ 3] 0.0-60.3 sec 139 MBytes 19.4 Mbits/sec 9.205 ms 413467/512804 (81%) [ 3] 0.0-60.3 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the InstaGENI Washington VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59098ms rtt min/avg/max/mdev = 69.071/69.536/70.001/0.403 ms }}} '''Iperf InstaGENI Washington VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.1 sec 35.5 MBytes 4.96 Mbits/sec [ 7] 0.0-60.1 sec 27.8 MBytes 3.88 Mbits/sec [ 3] 0.0-60.4 sec 24.8 MBytes 3.44 Mbits/sec [ 4] 0.0-60.7 sec 27.1 MBytes 3.75 Mbits/sec [ 6] 0.0-60.9 sec 28.8 MBytes 3.96 Mbits/sec [SUM] 0.0-60.9 sec 144 MBytes 19.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.1 sec 14.2 MBytes 1.99 Mbits/sec [ 11] 0.0-60.2 sec 18.2 MBytes 2.54 Mbits/sec [ 10] 0.0-60.2 sec 14.9 MBytes 2.07 Mbits/sec [ 7] 0.0-60.7 sec 15.5 MBytes 2.14 Mbits/sec [ 9] 0.0-61.0 sec 17.1 MBytes 2.36 Mbits/sec [ 12] 0.0-61.1 sec 16.2 MBytes 2.23 Mbits/sec [ 3] 0.0-61.7 sec 10.6 MBytes 1.45 Mbits/sec [ 5] 0.0-61.9 sec 14.5 MBytes 1.96 Mbits/sec [ 8] 0.0-62.1 sec 11.6 MBytes 1.57 Mbits/sec [ 4] 0.0-62.3 sec 14.1 MBytes 1.90 Mbits/sec [SUM] 0.0-62.3 sec 147 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI Washington VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512768 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.586 ms 413537/512767 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI Washington VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59095ms rtt min/avg/max/mdev = 69.127/69.556/71.649/0.462 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Washington/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:53:58 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 13:53:58 INFO : Reading slice IG-ST-2 credential... 13:53:58 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-02-27 14:59:00 UTC 13:53:58 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:53:58 INFO : Calling SCS... 13:54:01 INFO : Multi-AM reservation will include resources from these aggregates: 13:54:01 INFO : 13:54:01 INFO : 13:54:01 INFO : 13:54:01 INFO : 13:54:01 INFO : Stitcher doing createsliver at ... 13:54:20 INFO : ... Allocation at complete. 13:54:20 INFO : Stitcher doing createsliver at ... 13:54:36 INFO : ... Allocation at complete. 13:54:36 INFO : Stitcher doing createsliver at ... 13:54:43 INFO : ... Allocation at complete. 13:54:43 INFO : Stitcher doing createsliver at ... 13:55:28 INFO : DCN AM : must wait for status ready.... 13:55:28 INFO : Pausing 30 seconds to let circuit become ready... 13:56:06 INFO : Pausing 30 seconds to let circuit become ready... 13:56:43 INFO : DCN circuit 154201 is ready at 13:56:43 INFO : DCN circuit 154211 is ready at 13:56:51 INFO : ... Allocation at complete. 13:56:51 INFO : All aggregates are complete. 13:56:51 INFO : Your resources expire at 2015-02-26T18:44:01 (UTC). 13:56:51 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each Washington and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 32570 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com .... ig-wash's geni_status is: ready User lnevers logs in to ig-wash using: ssh -p 30266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2 Key file [/home/lnevers/.ssh/arendia-id_rsa] does NOT exist. Key file [/home/lnevers/.ssh/sendaria-id_rsa] does NOT exist. 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59097ms rtt min/avg/max/mdev = 69.229/69.590/69.991/0.284 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59100ms rtt min/avg/max/mdev = 69.298/69.653/71.446/0.318 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Washington/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher createsliver IG-ST-3 ./IG-ST-3.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:54:12 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 13:54:12 INFO : Reading slice IG-ST-3 credential... 13:54:12 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2015-02-27 15:09:51 UTC 13:54:12 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:54:12 INFO : Calling SCS... 13:54:17 INFO : Multi-AM reservation will include resources from these aggregates: 13:54:17 INFO : 13:54:17 INFO : 13:54:17 INFO : 13:54:17 INFO : 13:54:17 INFO : 13:54:18 INFO : Stitcher doing createsliver at ... 13:54:36 INFO : ... Allocation at complete. 13:54:36 INFO : Stitcher doing createsliver at ... 13:54:55 INFO : ... Allocation at complete. 13:54:55 INFO : Stitcher doing createsliver at ... 13:55:15 INFO : ... Allocation at complete. 13:55:15 INFO : Stitcher doing createsliver at ... 13:55:22 INFO : ... Allocation at complete. 13:55:23 INFO : Stitcher doing createsliver at ... 13:56:08 INFO : DCN AM : must wait for status ready.... 13:56:08 INFO : Pausing 30 seconds to let circuit become ready... 13:56:45 INFO : Pausing 30 seconds to let circuit become ready... 13:57:23 INFO : DCN circuit 154231 is ready at 13:57:23 INFO : DCN circuit 154221 is ready at 13:57:30 INFO : ... Allocation at complete. 13:57:30 INFO : All aggregates are complete. 13:57:30 INFO : Your resources expire at 2015-02-26T18:44:17 (UTC). 13:57:30 INFO : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the Washington host: {{{ $ readyToLogin.py IG-ST-3 --useSliceAggregates .... ig-pks's geni_status is: ready User lnevers logs in to ig-pks using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.pks2.sdn.uky.edu .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 37178 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com .... ig-wash's geni_status is: ready User lnevers logs in to ig-wash using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.washington.edu }}} Login to the Washington host and ping each remote: {{{ #ping GPO IG lnevers@ig-wash:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59041ms rtt min/avg/max/mdev = 69.165/70.721/139.427/8.954 ms # UKYPKS2 IG lnevers@ig-wash:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59104ms rtt min/avg/max/mdev = 72.434/73.973/149.469/9.835 ms }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Washington/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher createsliver IG-ST-4 ./IG-ST-4.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:57:29 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 13:57:29 INFO : Reading slice IG-ST-4 credential... 13:57:29 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-02-27 15:12:00 UTC 13:57:29 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:57:29 INFO : Calling SCS... 13:57:31 INFO : Multi-AM reservation will include resources from these aggregates: 13:57:31 INFO : 13:57:31 INFO : 13:57:31 INFO : 13:57:31 INFO : 13:57:31 INFO : Stitcher doing createsliver at ... 13:57:50 INFO : ... Allocation at complete. 13:57:50 INFO : Stitcher doing createsliver at ... 13:58:05 INFO : ... Allocation at complete. 13:58:05 INFO : Stitcher doing createsliver at ... 13:58:09 INFO : ... Allocation at complete. 13:58:09 INFO : Stitcher doing createsliver at ... 13:58:54 INFO : DCN AM : must wait for status ready.... 13:58:54 INFO : Pausing 30 seconds to let circuit become ready... 13:59:33 INFO : DCN circuit 154241 is ready at 13:59:41 INFO : ... Allocation at complete. 13:59:41 INFO : All aggregates are complete. 13:59:41 INFO : Your resources expire at 2015-02-26T18:47:31 (UTC). 13:59:41 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Washington and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 --useSliceAggregates .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.11 .... ig-wash's geni_status is: ready User lnevers logs in to ig-wash using: ssh -p 31034 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.washington.edu }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI Washington VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 138 MBytes 19.2 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 29.1 MBytes 4.07 Mbits/sec [ 4] 0.0-60.3 sec 28.2 MBytes 3.93 Mbits/sec [ 6] 0.0-60.5 sec 28.9 MBytes 4.00 Mbits/sec [ 7] 0.0-60.7 sec 28.4 MBytes 3.92 Mbits/sec [ 5] 0.0-60.9 sec 29.4 MBytes 4.05 Mbits/sec [SUM] 0.0-60.9 sec 144 MBytes 19.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 8] 0.0-60.1 sec 20.5 MBytes 2.86 Mbits/sec [ 11] 0.0-60.4 sec 14.4 MBytes 2.00 Mbits/sec [ 10] 0.0-61.0 sec 13.9 MBytes 1.91 Mbits/sec [ 5] 0.0-61.1 sec 14.4 MBytes 1.97 Mbits/sec [ 12] 0.0-61.2 sec 11.4 MBytes 1.56 Mbits/sec [ 7] 0.0-61.2 sec 14.9 MBytes 2.04 Mbits/sec [ 6] 0.0-61.2 sec 14.4 MBytes 1.97 Mbits/sec [ 4] 0.0-61.4 sec 15.4 MBytes 2.10 Mbits/sec [ 9] 0.0-61.4 sec 14.8 MBytes 2.01 Mbits/sec [ 3] 0.0-61.5 sec 14.1 MBytes 1.93 Mbits/sec [SUM] 0.0-61.5 sec 148 MBytes 20.2 Mbits/sec }}} '''Iperf ExoGENI GPO VM to InstaGENI Washington VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec 0.108 ms 413473/512820 (81%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI GPO VM to the InstaGENI Washington VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59098ms rtt min/avg/max/mdev = 69.244/69.869/76.086/0.945 ms }}} '''Iperf InstaGENI Washington VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 137 MBytes 19.1 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-59.3 sec 29.4 MBytes 4.15 Mbits/sec [ 5] 0.0-59.5 sec 25.2 MBytes 3.56 Mbits/sec [ 4] 0.0-59.9 sec 24.2 MBytes 3.40 Mbits/sec [ 7] 0.0-60.1 sec 41.0 MBytes 5.72 Mbits/sec [ 3] 0.0-60.4 sec 19.8 MBytes 2.74 Mbits/sec [SUM] 0.0-60.4 sec 140 MBytes 19.4 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.2 sec 13.9 MBytes 1.93 Mbits/sec [ 12] 0.0-60.5 sec 11.4 MBytes 1.58 Mbits/sec [ 11] 0.0-60.5 sec 14.1 MBytes 1.96 Mbits/sec [ 7] 0.0-60.6 sec 11.8 MBytes 1.63 Mbits/sec [ 3] 0.0-60.7 sec 12.0 MBytes 1.66 Mbits/sec [ 8] 0.0-60.8 sec 18.1 MBytes 2.50 Mbits/sec [ 9] 0.0-60.9 sec 14.5 MBytes 2.00 Mbits/sec [ 4] 0.0-61.1 sec 14.4 MBytes 1.97 Mbits/sec [ 6] 0.0-61.4 sec 10.0 MBytes 1.37 Mbits/sec [ 5] 0.0-61.9 sec 24.1 MBytes 3.27 Mbits/sec [SUM] 0.0-61.9 sec 144 MBytes 19.6 Mbits/sec }}} '''Iperf InstaGENI Washington VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 100 Mbits/sec [ 3] Sent 512750 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.633 ms 413552/512745 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI Washington VM to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59097ms rtt min/avg/max/mdev = 69.289/69.721/70.224/0.248 ms }}} == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/UniversityOfWashingtonInstaGENI#GENINetworkStitching Washington Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found. 4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Washington/IG-ST-6.rspec IG-ST-6.rspec]: {{{ $ stitcher createsliver IG-ST-6 ./IG-ST-6.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:17:48 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 09:17:48 INFO : Reading slice IG-ST-6 credential... 09:17:48 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2015-02-27 15:31:12 UTC 09:17:48 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:17:48 INFO : Calling SCS... 09:17:50 INFO : Multi-AM reservation will include resources from these aggregates: 09:17:50 INFO : 09:17:50 INFO : 09:17:50 INFO : 09:17:50 INFO : 09:17:50 INFO : Stitcher doing createsliver at ... 09:18:07 INFO : ... Allocation at complete. 09:18:07 INFO : Stitcher doing createsliver at ... 09:18:25 INFO : ... Allocation at complete. 09:18:25 INFO : Stitcher doing createsliver at ... 09:18:29 INFO : ... Allocation at complete. 09:18:29 INFO : Stitcher doing createsliver at ... 09:19:15 INFO : DCN AM : must wait for status ready.... 09:19:15 INFO : Pausing 30 seconds to let circuit become ready... 09:19:52 INFO : DCN circuit 154431 is ready at 09:19:59 INFO : ... Allocation at complete. 09:19:59 INFO : All aggregates are complete. 09:19:59 INFO : Your resources expire at 2015-02-27T14:07:50 (UTC). 09:19:59 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Washington/IG-ST-6-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Washington and GPO aggregate: {{{ $ readyToLogin.py IG-ST-6 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com ... ig-wash's geni_status is: ready User lnevers logs in to ig-wash using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI Washington VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-25'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-61.5 sec 137 MBytes 18.6 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-59.6 sec 42.2 MBytes 5.95 Mbits/sec [ 6] 0.0-59.9 sec 22.1 MBytes 3.10 Mbits/sec [ 7] 0.0-60.9 sec 29.5 MBytes 4.06 Mbits/sec [ 4] 0.0-61.2 sec 23.5 MBytes 3.22 Mbits/sec [ 5] 0.0-61.6 sec 24.4 MBytes 3.32 Mbits/sec [SUM] 0.0-61.6 sec 142 MBytes 19.3 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 11] 0.0-59.7 sec 13.2 MBytes 1.86 Mbits/sec [ 3] 0.0-60.1 sec 18.1 MBytes 2.53 Mbits/sec [ 5] 0.0-60.3 sec 12.9 MBytes 1.79 Mbits/sec [ 7] 0.0-60.3 sec 15.6 MBytes 2.17 Mbits/sec [ 12] 0.0-60.4 sec 11.8 MBytes 1.63 Mbits/sec [ 10] 0.0-60.5 sec 13.2 MBytes 1.84 Mbits/sec [ 8] 0.0-60.5 sec 19.6 MBytes 2.72 Mbits/sec [ 6] 0.0-60.6 sec 10.4 MBytes 1.44 Mbits/sec [ 9] 0.0-60.6 sec 15.6 MBytes 2.16 Mbits/sec [ 4] 0.0-63.1 sec 12.4 MBytes 1.65 Mbits/sec [SUM] 0.0-63.1 sec 143 MBytes 19.0 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI Washington VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512809 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec 2.338 ms 413661/512776 (81%) [ 3] 0.0-60.1 sec 289 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to InstaGENI Washington VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59101ms rtt min/avg/max/mdev = 69.375/79.295/355.477/51.244 ms }}} '''Iperf InstaGENI Washington VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-25'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.7 sec 136 MBytes 18.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.2 sec 20.8 MBytes 2.89 Mbits/sec [ 6] 0.0-60.6 sec 33.9 MBytes 4.69 Mbits/sec [ 4] 0.0-60.8 sec 25.9 MBytes 3.57 Mbits/sec [ 7] 0.0-61.0 sec 24.8 MBytes 3.41 Mbits/sec [ 3] 0.0-61.9 sec 34.8 MBytes 4.71 Mbits/sec [SUM] 0.0-61.9 sec 140 MBytes 19.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.2 sec 10.0 MBytes 1.42 Mbits/sec [ 8] 0.0-59.9 sec 18.1 MBytes 2.54 Mbits/sec [ 12] 0.0-60.1 sec 15.8 MBytes 2.20 Mbits/sec [ 10] 0.0-60.2 sec 14.0 MBytes 1.95 Mbits/sec [ 5] 0.0-60.2 sec 14.4 MBytes 2.00 Mbits/sec [ 11] 0.0-60.8 sec 11.0 MBytes 1.52 Mbits/sec [ 6] 0.0-61.2 sec 13.6 MBytes 1.87 Mbits/sec [ 3] 0.0-61.4 sec 16.2 MBytes 2.22 Mbits/sec [ 9] 0.0-61.5 sec 15.2 MBytes 2.08 Mbits/sec [ 7] 0.0-63.4 sec 14.9 MBytes 1.97 Mbits/sec [SUM] 0.0-63.4 sec 143 MBytes 19.0 Mbits/sec }}} '''Iperf InstaGENI Washington VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512774 datagrams [ 3] Server Report: [ 3] 0.0-60.3 sec 139 MBytes 19.3 Mbits/sec 21.588 ms 413785/512771 (81%) [ 3] 0.0-60.3 sec 70 datagrams received out-of-order }}} '''Ping from InstaGENI Washington VM to InstaGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59096ms rtt min/avg/max/mdev = 69.268/83.634/598.464/72.580 ms }}} ------ {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}