Version 1 (modified by 9 years ago) (diff) | ,
---|
University of Tennessee Stitching Confirmation Tests
This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.
IG-ST-1 New Site to GPO IG topology
The UTC site advertises the following stitching details:
Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.
Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:
omni.py createslice IG-ST-1 stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec -o
Determined login information at each UTC and GPO aggregate:
$ readyToLogin.py IG-ST-1 -a utc-ig .... $ readyToLogin.py IG-ST-1 -a gpo-ig ....
Measurements
Iperf InstaGENI GPO VM to InstaGENI UTC VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2015-01-XX
One Client_
Five Clients
Ten Clients
Iperf InstaGENI GPO VM to InstaGENI UTC VM (UDP) - UDP buffer size: 224 KByte (default)
Ping from InstaGENI GPO VM to the InstaGENI UTC VM
Iperf InstaGENI UTC VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2015-01-XX
One Client_
Five Clients
Ten Clients
Iperf InstaGENI UTC VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)
Ping from InstaGENI UTC VM to GPO InstaGENI VM
IG-ST-2 New Site to GPO IG Loop topology
Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:
omni.py createslice IG-ST-2 stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
Determined login information at each UTC and GPO aggregate:
$ readyToLogin.py IG-ST-2 -a utc-ig .... $ readyToLogin.py IG-ST-2 -a gpo-ig ....
Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:
remote-execute.py IG-ST-2a -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
IG-ST-3 IG-ST-3 New Site 3 node linear topology
Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:
omni.py createslice IG-ST-3 stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
Determined login information the UTC host:
$ readyToLogin.py IG-ST-3 -a utc-ig ....
Login to the UTC host and ping each remote:
#ping GPO IG ping 192.168.2.1 -c 60 -q # UKYPKS2 IG ping 192.168.4.1 -c 60 -q
IG-ST-4 New Site to GPO EG interoperability
Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.
omni.py createslice IG-ST-4 stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
Determined login information at each UTC and GPO aggregate:
$ readyToLogin.py IG-ST-4 -a utc-ig .... $ readyToLogin.py IG-ST-4 -a eg-sm ....
Measurements
Iperf ExoGENI GPO VM to InstaGENI UTC VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2015-01-XX
One Client_
Five Clients
Ten Clients
Iperf ExoGENI GPO VM to InstaGENI UTC VM (UDP) - UDP buffer size: 208 KByte (default)
Ping from ExoGENI GPO VM to the InstaGENI UTC VM
Iperf InstaGENI UTC VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2015-01-XX
One Client_
Five Clients
Ten Clients
Iperf InstaGENI UTC VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)
Ping from InstaGENI UTC VM to ExoGENI GPO VM
IG-ST-5 Site Information
Various pages include stitching information for a site. Each of the following were verified for this site:
- Verified that stitching VLANs and Device URN information exists in the UTC Aggregate page.
- Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
- Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
- Added site to the list of GENI Network Stitching Sites.
IG-ST-6 New Site OpenFlow topology
Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:
omni.py createslice IG-ST-6 stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
Determined login information at each UTC and GPO aggregate:
$ readyToLogin.py IG-ST-6 -a utc-ig .... $ readyToLogin.py IG-ST-6 -a gpo-ig ....
Measurements
Iperf InstaGENI GPO VM to InstaGENI UTC VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2015-01-xx
One Client_
Five Clients
Ten Clients
Iperf InstaGENI GPO VM to InstaGENI UTC VM (UDP) - UDP buffer size: 224 KByte (default)
Ping from InstaGENI GPO VM to InstaGENI UTC VM
Iperf InstaGENI UTC VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2015-01-xx
One Client_
Five Clients
Ten Clients
Iperf InstaGENI UTC VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)
Ping from InstaGENI UTC VM to InstaGENI GPO VM
Email help@geni.net for GENI support or email me with feedback on this page!