[[PageOutline]] = University of Northern Florida Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == EG-ST-1 New Site to GPO IG topology == The UNF site advertises the following stitching details for the connection to AL2S. {{{ orca tree true false 10000000kbps 10000000kbps urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.jack.net.internet2.edu:eth1/2:unf-eg 10 10000000kbps 10000000kbps l2sc ethernet consumer 1470-1484 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UNF/EG-ST-1-al2s.rspec EG-ST-1-al2s.rspec]: {{{ $ stitcher.py createsliver EG-ST-1 EG-ST-1-al2s.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 14:43:23 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 14:43:23 INFO : Reading slice EG-ST-1 credential... 14:43:23 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-1 expires on 2016-08-22 18:42:30 UTC 14:43:23 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 14:43:23 INFO : Calling SCS... 14:43:25 INFO : Multi-AM reservation will include resources from these aggregates: 14:43:25 INFO : 14:43:25 INFO : 14:43:25 INFO : 14:43:25 INFO : Stitcher doing createsliver at ... 14:43:32 INFO : ... Allocation at complete. 14:43:32 INFO : Stitcher doing createsliver at ... 14:43:56 INFO : ... Allocation at complete. 14:43:56 INFO : Stitcher doing createsliver at ... 14:44:02 INFO : ... Allocation at complete. 14:44:02 INFO : All aggregates are complete. 14:44:02 INFO : Your resources expire at 2016-08-21T18:33:25 (UTC). 14:44:02 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UNF/EG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice EG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each UNF EG and GPO IG aggregate: {{{ $ readyToLogin.py EG-ST-1 --useSliceAggregates .... eg-unf's geni_status is: ready User lnevers logs in to eg-unf using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@139.62.242.25 ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 32058 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to ExoGENI UNF VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2016-08-15'' __One Client__ {{{ [ 3] local 192.168.1.1 port 59464 connected with 192.168.1.2 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 710 MBytes 99.2 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 130 MBytes 18.2 Mbits/sec [ 3] 0.0-60.0 sec 123 MBytes 17.1 Mbits/sec [ 5] 0.0-60.1 sec 159 MBytes 22.2 Mbits/sec [ 4] 0.0-60.1 sec 126 MBytes 17.5 Mbits/sec [ 6] 0.0-60.2 sec 157 MBytes 21.9 Mbits/sec [SUM] 0.0-60.2 sec 695 MBytes 96.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.1 sec 65.5 MBytes 9.14 Mbits/sec [ 4] 0.0-60.1 sec 75.1 MBytes 10.5 Mbits/sec [ 5] 0.0-60.1 sec 63.9 MBytes 8.91 Mbits/sec [ 9] 0.0-60.1 sec 72.8 MBytes 10.1 Mbits/sec [ 8] 0.0-60.2 sec 65.8 MBytes 9.17 Mbits/sec [ 3] 0.0-60.2 sec 62.4 MBytes 8.69 Mbits/sec [ 12] 0.0-60.2 sec 73.4 MBytes 10.2 Mbits/sec [ 7] 0.0-60.2 sec 71.8 MBytes 10.0 Mbits/sec [ 6] 0.0-60.2 sec 69.4 MBytes 9.66 Mbits/sec [ 11] 0.0-60.2 sec 78.1 MBytes 10.9 Mbits/sec [SUM] 0.0-60.2 sec 698 MBytes 97.2 Mbits/sec }}} '''Iperf InstaGENI GPO VM to ExoGENI UNF VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512783 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 687 MBytes 96.0 Mbits/sec 0.153 ms 22980/512782 (4.5%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the ExoGENI UNF VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59099ms rtt min/avg/max/mdev = 30.164/30.540/31.054/0.211 ms }}} '''Iperf ExoGENI UNF VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2016-08-15'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 707 MBytes 98.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 116 MBytes 16.2 Mbits/sec [ 3] 0.0-60.1 sec 173 MBytes 24.1 Mbits/sec [ 4] 0.0-60.2 sec 159 MBytes 22.2 Mbits/sec [ 7] 0.0-60.2 sec 166 MBytes 23.1 Mbits/sec [ 6] 0.0-60.4 sec 93.1 MBytes 12.9 Mbits/sec [SUM] 0.0-60.4 sec 706 MBytes 98.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.1 sec 72.5 MBytes 10.1 Mbits/sec [ 12] 0.0-60.2 sec 74.4 MBytes 10.4 Mbits/sec [ 7] 0.0-60.2 sec 105 MBytes 14.7 Mbits/sec [ 5] 0.0-60.2 sec 76.0 MBytes 10.6 Mbits/sec [ 9] 0.0-60.4 sec 71.4 MBytes 9.92 Mbits/sec [ 8] 0.0-60.4 sec 52.5 MBytes 7.30 Mbits/sec [ 3] 0.0-60.4 sec 72.4 MBytes 10.1 Mbits/sec [ 4] 0.0-60.4 sec 66.2 MBytes 9.20 Mbits/sec [ 11] 0.0-60.5 sec 46.9 MBytes 6.50 Mbits/sec [ 10] 0.0-60.5 sec 70.2 MBytes 9.74 Mbits/sec [SUM] 0.0-60.5 sec 708 MBytes 98.2 Mbits/sec }}} '''Iperf ExoGENI UNF VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 686 MBytes 95.7 Mbits/sec 7.526 ms 23828/512820 (4.6%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI UNF VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59099ms rtt min/avg/max/mdev = 30.259/30.617/31.066/0.265 ms }}} == EG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UNF/EG-ST-2.rspec EG-ST-2.rspec]: {{{ $ stitcher.py createsliver EG-ST-2 EG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:20:10 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 10:20:10 INFO : Reading slice EG-ST-2 credential... 10:20:10 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-2 expires on 2017-05-29 14:19:51 UTC 10:20:10 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:20:10 INFO : Calling SCS... 10:20:11 INFO : Multi-AM reservation will include resources from these aggregates: 10:20:11 INFO : 10:20:11 INFO : 10:20:11 INFO : 10:20:11 INFO : Stitcher doing createsliver at ... 10:20:20 INFO : ... Allocation at complete. 10:20:20 INFO : Stitcher doing createsliver at ... 10:20:38 INFO : ... Allocation at complete. 10:20:39 INFO : Stitcher doing createsliver at ... 10:20:53 INFO : ... Allocation at complete. 10:20:53 INFO : All aggregates are complete. 10:20:53 INFO : Your resources expire at 2017-05-28T14:10:11 (UTC). 10:20:53 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UNF/EG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice EG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each UNF and GPO aggregate: {{{ $ readyToLogin.py EG-ST-2 --useSliceAggregates .... eg-unf's geni_status is: ready User lnevers logs in to eg-unf using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@139.62.242.11 ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25106 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ lnevers@ig-gpo:~$ ping 10.10.4.2 -c 60 -q PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59098ms rtt min/avg/max/mdev = 29.869/29.968/30.571/0.168 ms lnevers@ig-gpo:~$ ping 192.168.4.2 -c 60 -q PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59082ms rtt min/avg/max/mdev = 29.898/30.013/30.238/0.150 ms lnevers@ig-gpo:~$ }}} == EG-ST-3 EG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UNF/EG-ST-3.rspec EG-ST-3.rspec]: {{{ $ stitcher.py createsliver EG-ST-3a EG-ST-3.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 11:03:16 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 11:03:16 INFO : Reading slice EG-ST-3 credential... 11:03:16 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-3 expires on 2017-05-29 14:38:34 UTC 11:03:16 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 11:03:16 INFO : Calling SCS... 11:03:17 INFO : Multi-AM reservation will include resources from these aggregates: 11:03:17 INFO : 11:03:17 INFO : 11:03:17 INFO : 11:03:17 INFO : 11:03:17 INFO : Stitcher doing createsliver at ... 11:03:26 INFO : ... Allocation at complete. 11:03:26 INFO : Stitcher doing createsliver at ... 11:03:43 INFO : ... Allocation at complete. 11:03:43 INFO : Stitcher doing createsliver at ... 11:04:01 INFO : ... Allocation at complete. 11:04:01 INFO : Stitcher doing createsliver at ... 11:04:15 INFO : ... Allocation at complete. 11:04:15 INFO : All aggregates are complete. 11:04:15 INFO : Your resources expire at 2017-05-28T14:53:17 (UTC). 11:04:15 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UNF/EG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice EG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the UNF host: {{{ $ readyToLogin.py EG-ST-3 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25138 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com eg-unf's geni_status is: ready User lnevers logs in to eg-unf using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@139.62.242.10 ig-sox's geni_status is: ready User lnevers logs in to ig-sox using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.sox.net }}} Login to the UNF host and ping each remote: {{{ lnevers@eg-unf:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59079ms rtt min/avg/max/mdev = 29.895/30.583/60.353/3.893 ms lnevers@eg-unf:~$ # Utah IG lnevers@eg-unf:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59102ms rtt min/avg/max/mdev = 6.860/7.060/14.204/0.935 ms lnevers@eg-unf:~$ }}} }}} == EG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UNF/EG-ST-4.rspec EG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher createsliver EG-ST-4h EG-ST-4.rspec --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc --noExoSM 12:56:31 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 12:56:31 INFO : Requested to use GENI stitching instead of ExoGENI stitching 12:56:31 INFO : Reading slice EG-ST-4h credential... 12:56:32 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h expires on 2017-04-10 15:32:32 UTC 12:56:32 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 12:56:32 INFO : Calling SCS... 12:56:33 INFO : Multi-AM reservation will include resources from these aggregates: 12:56:33 INFO : 12:56:33 INFO : 12:56:33 INFO : 12:56:33 INFO : Stitcher doing createsliver at ... 12:56:40 INFO : ... Allocation at complete. 12:56:40 INFO : Stitcher doing createsliver at ... 12:56:49 INFO : ... Allocation at complete. 12:56:49 INFO : Stitcher doing createsliver at ... 12:56:50 ERROR : {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3739', 'code': {'geni_code': 24}} 12:56:50 WARNING : Stitching failed but will retry: Circuit reservation failed at . Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3739.)) 12:56:50 INFO : Deleting existing reservations... 12:56:50 INFO : Doing deletesliver at ... 12:56:53 INFO : Deleted reservation at . 12:56:53 INFO : Doing deletesliver at ... 12:56:57 INFO : Deleted reservation at . 12:56:57 INFO : Calling SCS for the 2nd time... 12:56:57 INFO : Pausing for 30 seconds for Aggregates to free up resources... 12:57:27 INFO : Multi-AM reservation will include resources from these aggregates: 12:57:27 INFO : 12:57:27 INFO : 12:57:27 INFO : 12:57:27 INFO : Stitcher doing createsliver at ... 12:57:34 ERROR : {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/84763fd6-1e16-4f72-bab8-fe5edff16b4e#/42c8044e-62b1-4eee-868f-5c8ccdd534c9.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}} 12:57:34 INFO : Got an error reserving resources in EG-ST-4h at 12:57:35 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h at unf-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h among active slices. 12:57:35 INFO : Will put back in the pool to allocate. Got: VLAN was unavailable. Retry 2nd time with new suggested VLANs 12:57:35 INFO : Pausing for 30 seconds for Aggregates to free up resources... 12:58:05 INFO : Stitcher doing createsliver at ... 12:58:13 ERROR : {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/0a1735bb-460e-4a8b-9d18-f26cbb2f6cfa#/e2a466f2-a6b5-4784-8863-c07e2e7d411b.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}} 12:58:13 INFO : Got an error reserving resources in EG-ST-4h at 12:58:15 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h at unf-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h among active slices. 12:58:15 INFO : Will put back in the pool to allocate. Got: VLAN was unavailable. Retry 3rd time with new suggested VLANs 12:58:15 INFO : Pausing for 30 seconds for Aggregates to free up resources... 12:58:45 INFO : Stitcher doing createsliver at ... 12:58:52 INFO : ... Allocation at complete. 12:58:52 INFO : Stitcher doing createsliver at ... 12:59:00 INFO : ... Allocation at complete. 12:59:00 INFO : Stitcher doing createsliver at ... 12:59:02 ERROR : {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3738', 'code': {'geni_code': 24}} 12:59:02 WARNING : Stitching failed but will retry: Circuit reservation failed at . Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3738.)) 12:59:02 INFO : Deleting existing reservations... 12:59:02 INFO : Doing deletesliver at ... 12:59:05 INFO : Deleted reservation at . 12:59:05 INFO : Doing deletesliver at ... 12:59:07 INFO : Deleted reservation at . 12:59:07 INFO : Calling SCS for the 3rd time... 12:59:08 INFO : Pausing for 30 seconds for Aggregates to free up resources... 12:59:38 INFO : Multi-AM reservation will include resources from these aggregates: 12:59:38 INFO : 12:59:38 INFO : 12:59:38 INFO : 12:59:38 INFO : Stitcher doing createsliver at ... 12:59:45 INFO : ... Allocation at complete. 12:59:45 INFO : Stitcher doing createsliver at ... 12:59:54 ERROR : {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/bad33c4a-4e86-4fe8-b339-44125b8b5546#/23259e32-f0c8-4a14-82ad-1917ec22d127.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}} 12:59:54 INFO : Got an error reserving resources in EG-ST-4h at 12:59:56 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h at gpo-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h among active slices. 12:59:56 INFO : Will put back in the pool to allocate. Got: VLAN was unavailable. Retry 2nd time with new suggested VLANs 12:59:56 INFO : Pausing for 30 seconds for Aggregates to free up resources... 13:00:26 INFO : Stitcher doing createsliver at ... 13:00:34 INFO : ... Allocation at complete. 13:00:34 INFO : Stitcher doing createsliver at ... 13:00:43 INFO : ... Allocation at complete. 13:00:43 INFO : All aggregates are complete. 13:00:43 INFO : Your resources expire at 2017-04-09T16:49:38 (UTC). 13:00:43 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UNF/EG-ST-4h-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice EG-ST-4h at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each UNF and GPO aggregate: {{{ $ readyToLogin.py EG-ST-4h --useSliceAggregates eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.12 eg-unf's geni_status is: ready User lnevers logs in to eg-unf using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@139.62.242.15 }}} === Measurements === '''Iperf ExoGENI GPO VM to ExoGENI UNF VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-04-03'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 694 MBytes 97.0 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 122 MBytes 17.0 Mbits/sec [ 6] 0.0-60.0 sec 144 MBytes 20.1 Mbits/sec [ 5] 0.0-60.1 sec 119 MBytes 16.6 Mbits/sec [ 4] 0.0-60.3 sec 175 MBytes 24.4 Mbits/sec [ 7] 0.0-60.6 sec 134 MBytes 18.6 Mbits/sec [SUM] 0.0-60.6 sec 694 MBytes 96.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 71.2 MBytes 9.96 Mbits/sec [ 10] 0.0-60.0 sec 82.9 MBytes 11.6 Mbits/sec [ 5] 0.0-60.1 sec 93.9 MBytes 13.1 Mbits/sec [ 12] 0.0-60.1 sec 62.4 MBytes 8.70 Mbits/sec [ 4] 0.0-60.1 sec 70.4 MBytes 9.82 Mbits/sec [ 9] 0.0-60.2 sec 53.6 MBytes 7.47 Mbits/sec [ 7] 0.0-60.2 sec 60.1 MBytes 8.37 Mbits/sec [ 11] 0.0-60.3 sec 78.0 MBytes 10.9 Mbits/sec [ 6] 0.0-60.4 sec 60.4 MBytes 8.39 Mbits/sec [ 8] 0.0-60.9 sec 64.1 MBytes 8.84 Mbits/sec [SUM] 0.0-60.9 sec 697 MBytes 96.1 Mbits/sec }}} '''Iperf ExoGENI GPO VM to ExoGENI UNF VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ 3] Server Report: [ 3] 0.0-60.0 sec 702 MBytes 98.1 Mbits/sec 0.017 ms 12196/512820 (2.4%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI GPO VM to the ExoGENI UNF VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59085ms rtt min/avg/max/mdev = 29.843/30.088/31.062/0.339 ms }}} '''Iperf ExoGENI UNF VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-04-03'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 693 MBytes 96.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 173 MBytes 24.2 Mbits/sec [ 4] 0.0-60.0 sec 205 MBytes 28.6 Mbits/sec [ 3] 0.0-60.1 sec 106 MBytes 14.8 Mbits/sec [ 7] 0.0-60.1 sec 113 MBytes 15.8 Mbits/sec [ 6] 0.0-60.3 sec 96.1 MBytes 13.4 Mbits/sec [SUM] 0.0-60.3 sec 694 MBytes 96.6 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 11] 0.0-60.1 sec 54.5 MBytes 7.61 Mbits/sec [ 9] 0.0-60.1 sec 58.8 MBytes 8.20 Mbits/sec [ 4] 0.0-60.1 sec 57.2 MBytes 7.99 Mbits/sec [ 6] 0.0-60.1 sec 97.2 MBytes 13.6 Mbits/sec [ 10] 0.0-60.2 sec 80.9 MBytes 11.3 Mbits/sec [ 3] 0.0-60.2 sec 66.4 MBytes 9.25 Mbits/sec [ 12] 0.0-60.3 sec 55.9 MBytes 7.78 Mbits/sec [ 5] 0.0-60.3 sec 61.5 MBytes 8.56 Mbits/sec [ 8] 0.0-60.6 sec 100 MBytes 13.9 Mbits/sec [ 7] 0.0-60.7 sec 65.0 MBytes 8.98 Mbits/sec [SUM] 0.0-60.7 sec 697 MBytes 96.4 Mbits/sec }}} '''Iperf ExoGENI UNF VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ 3] Server Report: [ 3] 0.0-60.0 sec 701 MBytes 98.0 Mbits/sec 0.049 ms 12657/512819 (2.5%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI UNF VM to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59082ms rtt min/avg/max/mdev = 29.874/30.046/31.905/0.353 ms }}}