Changes between Version 7 and Version 8 of GeniNetworkStitchingConfirmationTestStatus/UNF


Ignore:
Timestamp:
04/03/17 13:09:11 (7 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GeniNetworkStitchingConfirmationTestStatus/UNF

    v7 v8  
    202202== EG-ST-4 New Site to GPO EG interoperability ==
    203203
    204 
    205204Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UNF/EG-ST-4.rspec EG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.
    206205
    207206{{{
    208 
    209 $ stitcher.py createsliver EG-ST-4a EG-ST-4.rspec -o --noExoSM --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
    210 
     207$ stitcher createsliver EG-ST-4h EG-ST-4.rspec --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc --noExoSM
     20812:56:31 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
     20912:56:31 INFO    : Requested to use GENI stitching instead of ExoGENI stitching
     21012:56:31 INFO    : Reading slice EG-ST-4h credential...
     21112:56:32 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h expires on 2017-04-10 15:32:32 UTC
     21212:56:32 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
     21312:56:32 INFO    : Calling SCS...
     21412:56:33 INFO    : Multi-AM reservation will include resources from these aggregates:
     21512:56:33 INFO    :      <Aggregate unf-eg>
     21612:56:33 INFO    :      <Aggregate al2s>
     21712:56:33 INFO    :      <Aggregate gpo-eg>
     21812:56:33 INFO    : Stitcher doing createsliver at <Aggregate unf-eg>...
     21912:56:40 INFO    : ... Allocation at <Aggregate unf-eg> complete.
     22012:56:40 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
     22112:56:49 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
     22212:56:49 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
     22312:56:50 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3739', 'code': {'geni_code': 24}}
     22412:56:50 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate al2s>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3739.))
     22512:56:50 INFO    : Deleting existing reservations...
     22612:56:50 INFO    : Doing deletesliver at <Aggregate unf-eg>...
     22712:56:53 INFO    : Deleted reservation at <Aggregate unf-eg>.
     22812:56:53 INFO    : Doing deletesliver at <Aggregate gpo-eg>...
     22912:56:57 INFO    : Deleted reservation at <Aggregate gpo-eg>.
     23012:56:57 INFO    : Calling SCS for the 2nd time...
     23112:56:57 INFO    : Pausing for 30 seconds for Aggregates to free up resources...
     232
     233
     23412:57:27 INFO    : Multi-AM reservation will include resources from these aggregates:
     23512:57:27 INFO    :      <Aggregate unf-eg>
     23612:57:27 INFO    :      <Aggregate al2s>
     23712:57:27 INFO    :      <Aggregate gpo-eg>
     23812:57:27 INFO    : Stitcher doing createsliver at <Aggregate unf-eg>...
     23912:57:34 ERROR   :  {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/84763fd6-1e16-4f72-bab8-fe5edff16b4e#/42c8044e-62b1-4eee-868f-5c8ccdd534c9.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}}
     24012:57:34 INFO    : Got an error reserving resources in EG-ST-4h at <Aggregate unf-eg>
     24112:57:35 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h at unf-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h among active slices.
     24212:57:35 INFO    : Will put <Aggregate unf-eg> back in the pool to allocate. Got: VLAN was unavailable. Retry <Aggregate unf-eg> 2nd time with new suggested VLANs
     24312:57:35 INFO    : Pausing for 30 seconds for Aggregates to free up resources...
     244
     245
     24612:58:05 INFO    : Stitcher doing createsliver at <Aggregate unf-eg>...
     24712:58:13 ERROR   :  {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/0a1735bb-460e-4a8b-9d18-f26cbb2f6cfa#/e2a466f2-a6b5-4784-8863-c07e2e7d411b.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}}
     24812:58:13 INFO    : Got an error reserving resources in EG-ST-4h at <Aggregate unf-eg>
     24912:58:15 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h at unf-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h among active slices.
     25012:58:15 INFO    : Will put <Aggregate unf-eg> back in the pool to allocate. Got: VLAN was unavailable. Retry <Aggregate unf-eg> 3rd time with new suggested VLANs
     25112:58:15 INFO    : Pausing for 30 seconds for Aggregates to free up resources...
     252
     253
     25412:58:45 INFO    : Stitcher doing createsliver at <Aggregate unf-eg>...
     25512:58:52 INFO    : ... Allocation at <Aggregate unf-eg> complete.
     25612:58:52 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
     25712:59:00 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
     25812:59:00 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
     25912:59:02 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3738', 'code': {'geni_code': 24}}
     26012:59:02 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate al2s>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3738.))
     26112:59:02 INFO    : Deleting existing reservations...
     26212:59:02 INFO    : Doing deletesliver at <Aggregate unf-eg>...
     26312:59:05 INFO    : Deleted reservation at <Aggregate unf-eg>.
     26412:59:05 INFO    : Doing deletesliver at <Aggregate gpo-eg>...
     26512:59:07 INFO    : Deleted reservation at <Aggregate gpo-eg>.
     26612:59:07 INFO    : Calling SCS for the 3rd time...
     26712:59:08 INFO    : Pausing for 30 seconds for Aggregates to free up resources...
     268
     269
     27012:59:38 INFO    : Multi-AM reservation will include resources from these aggregates:
     27112:59:38 INFO    :      <Aggregate unf-eg>
     27212:59:38 INFO    :      <Aggregate al2s>
     27312:59:38 INFO    :      <Aggregate gpo-eg>
     27412:59:38 INFO    : Stitcher doing createsliver at <Aggregate unf-eg>...
     27512:59:45 INFO    : ... Allocation at <Aggregate unf-eg> complete.
     27612:59:45 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
     27712:59:54 ERROR   :  {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/bad33c4a-4e86-4fe8-b339-44125b8b5546#/23259e32-f0c8-4a14-82ad-1917ec22d127.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}}
     27812:59:54 INFO    : Got an error reserving resources in EG-ST-4h at <Aggregate gpo-eg>
     27912:59:56 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h at gpo-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4h among active slices.
     28012:59:56 INFO    : Will put <Aggregate gpo-eg> back in the pool to allocate. Got: VLAN was unavailable. Retry <Aggregate gpo-eg> 2nd time with new suggested VLANs
     28112:59:56 INFO    : Pausing for 30 seconds for Aggregates to free up resources...
     282
     283
     28413:00:26 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
     28513:00:34 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
     28613:00:34 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
     28713:00:43 INFO    : ... Allocation at <Aggregate al2s> complete.
     28813:00:43 INFO    : All aggregates are complete.
     28913:00:43 INFO    : Your resources expire at 2017-04-09T16:49:38 (UTC).
     29013:00:43 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UNF/EG-ST-4h-manifest-rspec-multiam-combined.xml'
     291Success: Reserved resources in slice EG-ST-4h at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
    211292}}}
    212293
    213294Determined login information at each UNF and GPO aggregate:
    214295{{{
    215 $ readyToLogin.py EG-ST-4 --useSliceAggregates
    216 
    217 }}}
    218 
     296$ readyToLogin.py EG-ST-4h --useSliceAggregates
     297
     298eg-gpo's geni_status is: ready
     299User lnevers logs in to eg-gpo using:
     300        ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.12
     301
     302eg-unf's geni_status is: ready
     303User lnevers logs in to eg-unf using:
     304        ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@139.62.242.15
     305
     306}}}
     307