[[PageOutline]] = University of Missouri Kansas City InstaGENI Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The UMKC site advertises the following stitching details: {{{ protogeni chainANDTree false false 2015-04-09T13:59:55Z 2015-04-09T13:59:55Z 1000000 1000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.kans.net.internet2.edu:eth5/1:umkc-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 1730-1744 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UMKC/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: {{{ $ stitcher.py createsliver IG-ST-1 IG-ST-1-al 2s.rspec -o 12:13:01 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 12:13:01 INFO : Reading slice IG-ST-1 credential... 12:13:01 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-05-30 00:00:00 UTC 12:13:01 INFO : Calling SCS... 12:13:03 INFO : Multi-AM reservation will include resources from these aggregates: 12:13:03 INFO : 12:13:03 INFO : 12:13:03 INFO : 12:13:03 INFO : Stitcher doing createsliver at ... 12:13:20 INFO : ... Allocation at complete. 12:13:20 INFO : Stitcher doing createsliver at ... 12:13:38 INFO : ... Allocation at complete. 12:13:38 INFO : Stitcher doing createsliver at ... 12:13:44 INFO : ... Allocation at complete. 12:13:44 INFO : All aggregates are complete. 12:13:44 INFO : Your resources expire at 2015-05-29T16:03:03 (UTC). 12:13:44 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UMKC/IG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each UMKC and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 38714 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com .... ig-umkc's geni_status is: ready User lnevers logs in to ig-umkc using: ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.umkc.edu }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI UMKC VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-09'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 142 MBytes 19.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.2 sec 38.8 MBytes 5.40 Mbits/sec [ 7] 0.0-60.4 sec 23.1 MBytes 3.21 Mbits/sec [ 6] 0.0-60.7 sec 37.4 MBytes 5.17 Mbits/sec [ 4] 0.0-61.0 sec 27.1 MBytes 3.73 Mbits/sec [ 3] 0.0-61.0 sec 20.0 MBytes 2.75 Mbits/sec [SUM] 0.0-61.0 sec 146 MBytes 20.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.0 sec 22.4 MBytes 3.13 Mbits/sec [ 8] 0.0-60.1 sec 13.8 MBytes 1.92 Mbits/sec [ 11] 0.0-60.5 sec 11.5 MBytes 1.60 Mbits/sec [ 5] 0.0-60.6 sec 19.4 MBytes 2.68 Mbits/sec [ 4] 0.0-60.7 sec 8.38 MBytes 1.16 Mbits/sec [ 10] 0.0-61.0 sec 9.38 MBytes 1.29 Mbits/sec [ 9] 0.0-61.2 sec 18.6 MBytes 2.55 Mbits/sec [ 7] 0.0-61.2 sec 18.9 MBytes 2.59 Mbits/sec [ 3] 0.0-61.3 sec 13.4 MBytes 1.83 Mbits/sec [ 6] 0.0-61.3 sec 10.8 MBytes 1.47 Mbits/sec [SUM] 0.0-61.3 sec 146 MBytes 20.0 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI UMKC VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 100 Mbits/sec [ 3] Sent 512808 datagrams read failed: Connection refused [ 3] WARNING: did not receive ack of last datagram after 3 tries. }}} '''Ping from InstaGENI GPO VM to the InstaGENI UMKC VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59092ms rtt min/avg/max/mdev = 39.836/40.508/43.271/0.560 ms }}} '''Iperf InstaGENI UMKC VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-09'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 141 MBytes 19.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 39.8 MBytes 5.55 Mbits/sec [ 5] 0.0-60.2 sec 32.0 MBytes 4.46 Mbits/sec [ 3] 0.0-60.3 sec 29.8 MBytes 4.14 Mbits/sec [ 6] 0.0-60.3 sec 21.9 MBytes 3.04 Mbits/sec [ 4] 0.0-60.4 sec 21.8 MBytes 3.02 Mbits/sec [SUM] 0.0-60.4 sec 145 MBytes 20.2 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-59.3 sec 8.62 MBytes 1.22 Mbits/sec [ 6] 0.0-59.8 sec 26.8 MBytes 3.76 Mbits/sec [ 11] 0.0-59.8 sec 15.8 MBytes 2.21 Mbits/sec [ 9] 0.0-59.9 sec 8.50 MBytes 1.19 Mbits/sec [ 7] 0.0-60.2 sec 12.4 MBytes 1.72 Mbits/sec [ 4] 0.0-60.3 sec 18.1 MBytes 2.52 Mbits/sec [ 3] 0.0-60.5 sec 14.8 MBytes 2.04 Mbits/sec [ 8] 0.0-60.7 sec 11.8 MBytes 1.62 Mbits/sec [ 10] 0.0-61.0 sec 14.9 MBytes 2.05 Mbits/sec [ 12] 0.0-61.3 sec 15.4 MBytes 2.10 Mbits/sec [SUM] 0.0-61.3 sec 147 MBytes 20.1 Mbits/sec }}} '''Iperf InstaGENI UMKC VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512771 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec 7.206 ms 413529/512766 (81%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UMKC VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59086ms rtt min/avg/max/mdev = 39.911/40.353/43.151/0.507 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UMKC/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o 12:14:55 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 12:14:56 INFO : Reading slice IG-ST-2 credential... 12:14:56 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-05-30 00:00:00 UTC 12:14:56 INFO : Calling SCS... 12:14:58 INFO : Multi-AM reservation will include resources from these aggregates: 12:14:58 INFO : 12:14:58 INFO : 12:14:58 INFO : 12:14:58 INFO : Stitcher doing createsliver at ... 12:15:18 INFO : ... Allocation at complete. 12:15:18 INFO : Stitcher doing createsliver at ... 12:15:39 INFO : ... Allocation at complete. 12:15:39 INFO : Stitcher doing createsliver at ... 12:15:48 INFO : ... Allocation at complete. 12:15:48 INFO : All aggregates are complete. 12:15:48 INFO : Your resources expire at 2015-05-29T16:04:58 (UTC). 12:15:48 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UMKC/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each UMKC and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 39482 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com .... ig-umkc's geni_status is: ready User lnevers logs in to ig-umkc using: ssh -p 32314 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.umkc.edu }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59083ms rtt min/avg/max/mdev = 39.947/40.376/45.658/0.760 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59083ms rtt min/avg/max/mdev = 40.003/40.384/41.473/0.452 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UMKC/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 12:15:04 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 12:15:04 INFO : Reading slice IG-ST-3 credential... 12:15:04 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2015-05-30 00:00:00 UTC 12:15:04 INFO : Calling SCS... 12:15:06 INFO : Multi-AM reservation will include resources from these aggregates: 12:15:06 INFO : 12:15:06 INFO : 12:15:06 INFO : 12:15:06 INFO : 12:15:06 INFO : Stitcher doing createsliver at ... 12:15:24 INFO : ... Allocation at complete. 12:15:24 INFO : Stitcher doing createsliver at ... 12:15:44 INFO : ... Allocation at complete. 12:15:44 INFO : Stitcher doing createsliver at ... 12:16:03 INFO : ... Allocation at complete. 12:16:03 INFO : Stitcher doing createsliver at ... 12:16:11 INFO : ... Allocation at complete. 12:16:11 INFO : All aggregates are complete. 12:16:11 INFO : Your resources expire at 2015-05-29T16:05:06 (UTC). 12:16:11 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UMKC/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).}}} Determined login information the UMKC host: {{{ $ readyToLogin.py IG-ST-3 -a umkc-ig .... ig-umkc's geni_status is: ready User lnevers logs in to ig-umkc using: ssh -p 32570 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.umkc.edu }}} Login to the UMKC host and ping each remote: {{{ #ping GPO IG lnevers@ig-umkc:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59082ms rtt min/avg/max/mdev = 39.943/40.307/42.830/0.422 ms # UMKCPKS2 IG lnevers@ig-umkc:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59100ms rtt min/avg/max/mdev = 22.600/22.893/23.181/0.241 ms }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UMKC/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 12:32:19 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 12:32:20 INFO : Reading slice IG-ST-4 credential... 12:32:20 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-05-30 00:00:00 UTC 12:32:20 INFO : Calling SCS... 12:32:22 INFO : Multi-AM reservation will include resources from these aggregates: 12:32:22 INFO : 12:32:22 INFO : 12:32:22 INFO : 12:32:22 INFO : Stitcher doing createsliver at ... 12:32:39 INFO : ... Allocation at complete. 12:32:39 INFO : Stitcher doing createsliver at ... 12:32:50 INFO : ... Allocation at complete. 12:32:50 INFO : Stitcher doing createsliver at ... 12:32:57 INFO : ... Allocation at complete. 12:32:57 INFO : All aggregates are complete. 12:32:57 INFO : Your resources expire at 2015-04-23T16:22:22 (UTC). 12:32:57 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UMKC/IG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each UMKC and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 --useSliceAggregates .... }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI UMKC VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2015-04-XX'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf ExoGENI GPO VM to InstaGENI UMKC VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ }}} '''Ping from ExoGENI GPO VM to the InstaGENI UMKC VM ''' {{{ }}} '''Iperf InstaGENI UMKC VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-XX'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI UMKC VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI UMKC VM to ExoGENI GPO VM ''' {{{ }}} == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/UMKCInstaGENI#GENINetworkStitching UMKC Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found. 4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UMKC/IG-ST-6.rspec IG-ST-6.rspec]: {{{ omni.py createslice IG-ST-6 stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o }}} Determined login information at each UMKC and GPO aggregate: {{{ $ readyToLogin.py IG-ST-6 --useSliceAggregates .... }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI UMKC VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-xx'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI GPO VM to InstaGENI UMKC VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI GPO VM to InstaGENI UMKC VM ''' {{{ }}} '''Iperf InstaGENI UMKC VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-xx'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI UMKC VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI UMKC VM to InstaGENI GPO VM ''' {{{ }}} ------ {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}