wiki:GeniNetworkStitchingConfirmationTestStatus/UKYPKS2

Version 6 (modified by lnevers@bbn.com, 10 years ago) (diff)

--

University of Kentucky PKS2 Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The UKYPKS2 site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2014-09-08T18:15:11Z" >
<aggregate id="urn:publicid:IDN+pks2.sdn.uky.edu+authority+cm" url="https://www.pks2.sdn.uky.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2014-09-08T18:15:11Z</start>
    <end type="time">2014-09-08T18:15:11Z</end>
</lifetime>
<node id="urn:publicid:IDN+pks2.sdn.uky.edu+node+procurve2">
  <port id="urn:publicid:IDN+pks2.sdn.uky.edu+stitchport+procurve2:1.18.ion">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+pks2.sdn.uky.edu+interface+procurve2:1.18.ion">
      <remoteLinkId>urn:publicid:IDN+ion.internet2.edu+interface+rtr.atla:xe-0/1/3:ukypks2-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>1830-1849</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-ion.rspec:

$ omni.py createslice IG-ST-1
14:16:05 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
14:16:05 INFO    : Loading config file /home/lnevers/.gcf/omni_config
14:16:05 INFO    : Setting option useSliceMembers based on omni_config setting
14:16:05 INFO    : Using control framework portal
14:16:05 INFO    : Member Authority is https://ch.geni.net/MA (from config)
14:16:05 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
14:16:06 INFO    : Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1, Expiration 2014-09-15 18:16:05+00:00
14:16:06 INFO    :  ------------------------------------------------------
14:16:06 INFO    :  Completed createslice:

  Options as run:
		framework: portal
		project: ln-test
		useSliceMembers: True

  Args: createslice IG-ST-1

  Result Summary: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1, Expiration 2014-09-15 18:16:05+00:00
 
14:16:06 INFO    :  ======================================================

$ stitcher createsliver IG-ST-1 IG-ST-1-ion.rspec 
10:11:28 INFO    : Configured logging from file /home/lnevers/gcf-2.7-0908/src/gcf/stitcher_logging.conf
10:11:28 INFO    : Reading slice IG-ST-1 credential...
10:11:28 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2014-09-15 18:16:05 UTC
10:11:28 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
10:11:28 INFO    : Calling SCS...
10:11:30 INFO    : Multi-AM reservation will include resources from these aggregates:
10:11:30 INFO    : 	<Aggregate ukypks2-ig>
10:11:30 INFO    : 	<Aggregate gpo-ig>
10:11:30 INFO    : 	<Aggregate ion>
10:11:30 INFO    : Stitcher doing createsliver at <Aggregate ukypks2-ig>...
10:11:47 INFO    : ... Allocation at <Aggregate ukypks2-ig> complete.
10:11:47 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
10:12:02 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
10:12:02 INFO    : Stitcher doing createsliver at <Aggregate ion>...
10:12:47 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
10:12:47 INFO    : Pausing 30 seconds to let circuit become ready...
10:13:25 INFO    : Pausing 30 seconds to let circuit become ready...
10:14:02 INFO    : Pausing 30 seconds to let circuit become ready...
10:14:40 INFO    : Pausing 30 seconds to let circuit become ready...
10:15:17 INFO    : Pausing 30 seconds to let circuit become ready...
10:15:54 INFO    : DCN circuit 116731 is ready at <Aggregate ion>
10:16:02 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-IG-ST-1-for-lnevers-cred.xml
10:16:02 INFO    : ... Allocation at <Aggregate ion> complete.
10:16:02 INFO    : All aggregates are complete.
10:16:02 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-09-10 14:12:07 UTC at <Aggregate ion>. Second expiration is 2014-09-15T18:16:05 UTC. 
10:16:02 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UKYPKS2/IG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UKYPKS2 and GPO aggregate:

$ readyToLogin.py IG-ST-1 -a ukypks2-ig
  ....
ig-pks2's geni_status is: ready 
User lnevers logs in to ig-pks2 using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.pks2.sdn.uky.edu

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 34106  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI UKYPKS2 VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-09-09

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   142 MBytes  19.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  27.9 MBytes  3.89 Mbits/sec
[  4]  0.0-60.5 sec  34.4 MBytes  4.77 Mbits/sec
[  6]  0.0-60.5 sec  32.1 MBytes  4.45 Mbits/sec
[  5]  0.0-60.9 sec  24.9 MBytes  3.43 Mbits/sec
[  7]  0.0-61.0 sec  25.4 MBytes  3.49 Mbits/sec
[SUM]  0.0-61.0 sec   145 MBytes  19.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  12.0 MBytes  1.68 Mbits/sec
[ 11]  0.0-60.1 sec  10.4 MBytes  1.45 Mbits/sec
[ 12]  0.0-60.4 sec  12.8 MBytes  1.77 Mbits/sec
[  3]  0.0-60.7 sec  18.8 MBytes  2.59 Mbits/sec
[  6]  0.0-60.8 sec  17.8 MBytes  2.45 Mbits/sec
[  8]  0.0-61.0 sec  12.8 MBytes  1.75 Mbits/sec
[  5]  0.0-61.0 sec  22.2 MBytes  3.06 Mbits/sec
[  9]  0.0-61.2 sec  8.75 MBytes  1.20 Mbits/sec
[ 10]  0.0-62.2 sec  16.6 MBytes  2.24 Mbits/sec
[  4]  0.0-62.2 sec  15.4 MBytes  2.07 Mbits/sec
[SUM]  0.0-62.2 sec   147 MBytes  19.9 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI UKYPKS2 VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512810 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec   8.980 ms 413507/512808 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI UKYPKS2 VM

60 packets transmitted, 60 received, 0% packet loss, time 59100ms
rtt min/avg/max/mdev = 36.426/36.607/39.727/0.448 ms

Iperf InstaGENI UKYPKS2 VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-09-09

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   142 MBytes  19.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec  26.6 MBytes  3.72 Mbits/sec
[  5]  0.0-60.1 sec  25.5 MBytes  3.56 Mbits/sec
[  4]  0.0-60.2 sec  36.1 MBytes  5.04 Mbits/sec
[  3]  0.0-60.4 sec  26.5 MBytes  3.68 Mbits/sec
[  7]  0.0-61.1 sec  29.6 MBytes  4.07 Mbits/sec
[SUM]  0.0-61.1 sec   144 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.0 sec  11.1 MBytes  1.55 Mbits/sec
[ 10]  0.0-60.1 sec  21.4 MBytes  2.98 Mbits/sec
[  9]  0.0-60.2 sec  12.8 MBytes  1.78 Mbits/sec
[  5]  0.0-60.4 sec  15.5 MBytes  2.15 Mbits/sec
[  6]  0.0-60.6 sec  20.1 MBytes  2.79 Mbits/sec
[  8]  0.0-60.7 sec  12.4 MBytes  1.71 Mbits/sec
[  7]  0.0-60.8 sec  10.0 MBytes  1.38 Mbits/sec
[ 11]  0.0-61.3 sec  14.1 MBytes  1.93 Mbits/sec
[  4]  0.0-61.3 sec  13.4 MBytes  1.83 Mbits/sec
[  3]  0.0-62.1 sec  16.2 MBytes  2.19 Mbits/sec
[SUM]  0.0-62.1 sec   147 MBytes  19.8 Mbits/sec

Iperf InstaGENI UKYPKS2 VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512790 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   139 MBytes  19.4 Mbits/sec  14.567 ms 413570/512787 (81%)
[  3]  0.0-60.3 sec  1 datagrams received out-of-order

Ping from InstaGENI UKYPKS2 VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59099ms
rtt min/avg/max/mdev = 36.286/36.534/36.879/0.118 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ omni.py createslice IG-ST-2
11:20:03 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
11:20:03 INFO    : Loading config file /home/lnevers/.gcf/omni_config
11:20:03 INFO    : Setting option useSliceMembers based on omni_config setting
11:20:03 INFO    : Using control framework portal
11:20:03 INFO    : Member Authority is https://ch.geni.net/MA (from config)
11:20:03 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
11:20:04 INFO    : Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2, Expiration 2014-09-16 15:20:04+00:00
11:20:04 INFO    :  ------------------------------------------------------
11:20:04 INFO    :  Completed createslice:

  Options as run:
		framework: portal
		project: ln-test
		useSliceMembers: True

  Args: createslice IG-ST-2

  Result Summary: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2, Expiration 2014-09-16 15:20:04+00:00
 
11:20:04 INFO    :  ======================================================

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
11:20:30 INFO    : Configured logging from file /home/lnevers/gcf-2.7-0908/src/gcf/stitcher_logging.conf
11:20:31 INFO    : Reading slice IG-ST-2 credential...
11:20:31 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2014-09-16 15:20:04 UTC
11:20:31 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
11:20:31 INFO    : Calling SCS...
11:20:34 INFO    : Multi-AM reservation will include resources from these aggregates:
11:20:34 INFO    : 	<Aggregate ukypks2-ig>
11:20:34 INFO    : 	<Aggregate gpo-ig>
11:20:34 INFO    : 	<Aggregate ion>
11:20:34 INFO    : Stitcher doing createsliver at <Aggregate ukypks2-ig>...
11:20:53 INFO    : ... Allocation at <Aggregate ukypks2-ig> complete.
11:20:53 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:21:11 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:21:11 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:21:56 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:21:56 INFO    : Pausing 30 seconds to let circuit become ready...
11:22:34 INFO    : Pausing 30 seconds to let circuit become ready...
11:23:12 INFO    : DCN circuit 116751 is ready at <Aggregate ion>
11:23:12 INFO    : DCN circuit 116761 is ready at <Aggregate ion>
11:23:19 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-IG-ST-2-for-lnevers-cred.xml
11:23:19 INFO    : ... Allocation at <Aggregate ion> complete.
11:23:19 INFO    : All aggregates are complete.
11:23:19 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-09-10 15:21:16 UTC at <Aggregate ion>. Se
11:23:19 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UKYPKS2/IG-ST-2-manifest-rspec-multiam-combin
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched links

Determined login information at each UKYPKS2 and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a ukypks2-ig
  ....
ig-pks2's geni_status is: ready 
User lnevers logs in to ig-pks2 using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.pks2.sdn.uky.edu


$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 34106  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

[lnevers@ig-gpo ~]$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59063ms
rtt min/avg/max/mdev = 35.927/36.651/74.379/4.913 ms
[lnevers@ig-gpo ~]$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59068ms
rtt min/avg/max/mdev = 35.876/36.638/74.746/4.963 ms

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ omni.py createslice IG-ST-3
11:30:05 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
11:30:05 INFO    : Loading config file /home/lnevers/.gcf/omni_config
11:30:05 INFO    : Setting option useSliceMembers based on omni_config setting
11:30:05 INFO    : Using control framework portal
11:30:05 INFO    : Member Authority is https://ch.geni.net/MA (from config)
11:30:05 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
11:30:05 INFO    : Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3, Expiration 2014-09-16 15:30:05+00:00
11:30:05 INFO    :  ------------------------------------------------------
11:30:05 INFO    :  Completed createslice:

  Options as run:
		framework: portal
		project: ln-test
		useSliceMembers: True

  Args: createslice IG-ST-3

  Result Summary: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3, Expiration 2014-09-16 15:30:05+00:00
 
11:30:05 INFO    :  ======================================================

12:07:26 INFO    : Configured logging from file /home/lnevers/gcf-2.7-0908/src/gcf/stitcher_logging.conf
12:07:27 INFO    : Reading slice IG-ST-3 credential...
12:07:27 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2014-09-16 15:30:05 UTC
12:07:27 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
12:07:27 INFO    : Calling SCS...
12:07:31 INFO    : Multi-AM reservation will include resources from these aggregates:
12:07:31 INFO    : 	<Aggregate ukypks2-ig>
12:07:31 INFO    : 	<Aggregate ion>
12:07:31 INFO    : 	<Aggregate gpo-ig>
12:07:31 INFO    : 	<Aggregate utah-pg>
12:07:31 INFO    : 	<Aggregate utah-ig>
12:07:31 INFO    : Stitcher doing createsliver at <Aggregate ukypks2-ig>...
12:07:50 INFO    : ... Allocation at <Aggregate ukypks2-ig> complete.
12:07:50 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
12:08:04 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
12:08:04 INFO    : Stitcher doing createsliver at <Aggregate utah-pg>...
12:08:53 INFO    : ... Allocation at <Aggregate utah-pg> complete.
12:08:53 INFO    : Stitcher doing createsliver at <Aggregate ion>...
12:09:39 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
12:09:39 INFO    : Pausing 30 seconds to let circuit become ready...
12:10:17 INFO    : Pausing 30 seconds to let circuit become ready...
12:10:54 INFO    : DCN circuit 116801 is ready at <Aggregate ion>
12:10:54 INFO    : DCN circuit 116811 is ready at <Aggregate ion>
12:11:01 INFO    : Getting credential from file /tmp/slice-ch-geni-net-ln-test-IG-ST-3-for-lnevers-cred.xml
12:11:01 INFO    : ... Allocation at <Aggregate ion> complete.
12:11:01 INFO    : Stitcher doing createsliver at <Aggregate utah-ig>...
12:11:21 INFO    : ... Allocation at <Aggregate utah-ig> complete.
12:11:21 INFO    : All aggregates are complete.
12:11:21 INFO    : Your resources expire at 5 different times at different AMs. The first expiration is 2014-09-09 21:08:13 UTC at <Aggregate utah-pg>. S
12:11:21 INFO    : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/UKYPKS2/IG-ST-3-manifest-rspec-multiam-combined.
Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched links


Determined login information the UKYPKS2 host:
{{{
$ readyToLogin.py IG-ST-3 -a ukypks2-ig
  ....
ig-pks2's geni_status is: ready 
User lnevers logs in to ig-pks2 using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.pks2.sdn.uky.edu

}}}
Login to the UKYPKS2 host and ping each remote: 
{{{
#ping GPO IG 
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59036ms
rtt min/avg/max/mdev = 35.895/36.595/73.970/4.866 ms

# Utah IG
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 0 received, +45 errors, 100% packet loss, time 59015ms
pipe 3
}}}


== IG-ST-4 New Site to GPO EG interoperability ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UKYPKS2/IG-ST-4.rspec IG-ST-4.rspec],

{{{
$ omni.py createslice IG-ST-4
12:17:36 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:17:36 INFO    : Loading config file /home/lnevers/.gcf/omni_config
12:17:36 INFO    : Setting option useSliceMembers based on omni_config setting
12:17:36 INFO    : Using control framework portal
12:17:36 INFO    : Member Authority is https://ch.geni.net/MA (from config)
12:17:36 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
12:17:36 INFO    : Created slice with Name IG-ST-4, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4, 
12:17:36 INFO    :  ------------------------------------------------------
12:17:36 INFO    :  Completed createslice:

  Options as run:
		framework: portal
		project: ln-test
		useSliceMembers: True
  Args: createslice IG-ST-4
  Result Summary: Created slice with Name IG-ST-4, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4, E
12:17:36 INFO    :  ======================================================


$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 
12:17:44 INFO    : Configured logging from file /home/lnevers/gcf-2.7-0908/src/gcf/stitcher_logging.conf
12:17:45 INFO    : Reading slice IG-ST-4 credential...
12:17:45 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2014-09-16 16:17:36 U
12:17:45 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
12:17:45 INFO    : Calling SCS...
12:17:47 INFO    : Multi-AM reservation will include resources from these aggregates:
12:17:47 INFO    : 	<Aggregate ukypks2-ig>
12:17:47 INFO    : 	<Aggregate gpo-eg>
12:17:47 INFO    : 	<Aggregate ion>
12:17:47 INFO    : Stitcher doing createsliver at <Aggregate ukypks2-ig>...
12:18:04 INFO    : ... Allocation at <Aggregate ukypks2-ig> complete.
12:18:04 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
12:18:20 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
12:18:20 INFO    : Stitcher doing createsliver at <Aggregate ion>...
12:19:06 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
12:19:06 INFO    : Pausing 30 seconds to let circuit become ready...
12:19:44 INFO    : Pausing 30 seconds to let circuit become ready...
12:20:21 INFO    : Pausing 30 seconds to let circuit become ready...
12:20:58 INFO    : Pausing 30 seconds to let circuit become ready...
12:21:36 INFO    : Pausing 30 seconds to let circuit become ready...
12:22:13 INFO    : Pausing 30 seconds to let circuit become ready...
12:22:51 INFO    : Pausing 30 seconds to let circuit become ready...
12:23:28 INFO    : Pausing 30 seconds to let circuit become ready...
12:24:06 INFO    : Pausing 30 seconds to let circuit become ready...
12:24:43 INFO    : Pausing 30 seconds to let circuit become ready...


XXXX

}}}

Determined login information at each UKYPKS2 and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-4 -a ukypks2-ig
  ....

$ readyToLogin.py IG-ST-4 -a eg-sm
  ....
}}}

=== Measurements ===

'''Iperf ExoGENI GPO VM to InstaGENI UKYPKS2 VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2014-08-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf ExoGENI GPO VM to InstaGENI UKYPKS2 VM (UDP) - UDP buffer size:  224 KByte (default) '''
{{{

}}}

'''Ping from ExoGENI GPO VM to the InstaGENI UKYPKS2 VM '''
{{{

}}}


'''Iperf InstaGENI UKYPKS2 VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2014-08-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf InstaGENI UKYPKS2 VM to ExoGENI GPO VM (UDP)  - UDP buffer size:  224 KByte (default) '''
{{{

}}}

'''Ping from InstaGENI UKYPKS2 VM to ExoGENI GPO VM '''
{{{

}}}
== IG-ST-5 Site Information ==
== IG-ST-6 New Site !OpenFlow topology ==